PN 57.4400.0100_020115 - Genie

Section 19Lubrication System700 SeriesOperation:Engine lubricating oil - to renewRecommended torque:Engine type Nm lbf ft kgf mSump drainplug 34 25 3,5Special notes and tools:19.02Warning! Discard the used canister and lubricating oil in a safe place and inaccordance with local regulations.Do not fill the sump past the notch on the dipstick.Any excess lubricating oil must be drained to the correct level.An excess of lubricating oil could enter the breather valve.This could cause the engine speed to increase rapidly without control.Cautions: Ensure that the application is on a level surface to ensure anaccurate reading on the dipstick.Fill the sump to the correct level.To ensure that the engine will not start,disconnect the electrical stop control of thefuel injection pump. Operate the startermotor until oil pressure is obtained. Oilpressure is indicated when the warninglight is extinguished or by a reading on thegauge.Start the engine and check for leakagefrom the filter. Stop the engine. After 15minutes, check the oil level on the dipstickand, if necessary, put more lubricating oilinto the sump. Fill the sump to the notchon the dipstick with an approved lubricatingoil.Notch05/99Printed in England© Propriety information of Perkins Engines Company Limited, all rights reserved104478 51-19M-1-SM 01-29-02 57.4400.0100