PN 57.4400.0100_020115 - Genie

Section 15Timing Case and Drive Assembly700 SeriesOperation:Timing case - to remove and to fit15.02Recommended torque:Engine type Nm lbf ft kgf m-Sevice operations:1. Remove crankshaft pulley … … 14.01Special notes and tools:Tools: PliersCaution: If a timing case is removed or renewed, the correct setting for themaximum fuel can be lost. To ensure that the maximum fuel is set correctly, areference setting is necessary, before the timing case is removed and thissetting must be used when the original, or the new timing case, is fitted to theengine.Refer to operation 20.16 before timing case is removed.05/99Printed in England© Propriety information of Perkins Engines Company Limited, all rights reserved78452 51-19M-1-SM 01-29-02 57.4400.0100