PN 57.4400.0100_020115 - Genie

TOPPTOPPSection 13Connecting Rod Assembly700 SeriesOperation:Piston and piston ring - inspectionRecommended torque:Engine type Nm lbf ft kgf mService operations:1. Remove piston assembly … … … 13.0213.03Special notes:Any letters or markings on a surface of a ring will always be on the top face(facing upwards).Caution: Only expand the ring gaps enough to ensure that the ends of therings do not damage the piston when the ring is removed or put into position.Fit the spring of the oil control ring in the bottom groove of the piston, with thelatch pin inside both ends of the spring. Fit the oil control ring over the spring.Ensure that the ring gap is at 180° to the latch pin. The manufacturer'ssymbol or the word 'TOP', must be towards the top of the piston.Identification marks.1st2ndOil controlProfile of piston rings05/99Printed in England© Propriety information of Perkins Engines Company Limited, all rights reserved54428 51-19M-1-SM 01-29-02 57.4400.0100