PN 57.4400.0100_020115 - Genie

Section 4Preventive Maintenance700 SeriesHow to drain the cooling systemWarnings!• Do not drain the coolant while the engine is still hotand the system is under pressure becausedangerous hot coolant can be discharged.•Discard used coolant in a safe place and inaccordance with local regulations1 Ensure that the machine is on level ground.2 Remove the filler cap of the cooling system.3 Remove the drain plug (A1) from the side of thecylinder block in order to drain the engine. Ensure thatthe drain holes are not restricted.4 Open the tap or remove the drain plug at the bottomof the radiator in order to drain the radiator. If theradiator does not have a tap or drain plug, disconnectthe hose at the bottom of the radiator.5 Flush the system with POWERPART Easy Flush.6 Fit the drain plugs and the filler cap. Close theradiator tap or connect the radiator hose.Printed in England© Propriety information of Perkins Engines Company Limited, all rights reserved19350 51-19M-1-SM 01-29-02 57.4400.0100