PN 57.4400.0100_020115 - Genie

3.13 DESCRIPTION OF THE MAINCOMPONENTSTransmissionConsists of a variable displacement hydraulic pump thatdrives a hydraulic motor located on the front axle. Thepump only begins to drive the motor when the acceleratoris depressed. The hydraulic motor adjusts to givemaximum torque when under heavy loads, or maximumflow under light loads.Steering Axles (front and rear) Differential GearsThe front axle (limited slip differential) drives the rearaxle (locked differential) thru a drive shaft to provide4 -wheel drive at all times.TiresThe machine is equipped with tires suitable sized forthe maximum load allowed on the machine. Whenreplacement is necessary, they shall be replaced withnew ones having the same dimensions and loadingcapacity.Overload Warning SystemHydraulic CircuitConsists of a gear pump connected to the engine which,through a steering valve, dispenses oil to the distributorfor the following functions:Brake Circuit• Boom lifting / Lowering• Telescopic Boom SectionsExtension / Retraction• Fork Rotation• Fork Locking• Fork Tilting• Fork Side Shift• Steering Valve• Control ValveConsists of an independent reservoir and circuit: Thebrake pedal operates a pump which pressurizes thewet disc brakes in the front axle.3.14 OPTIONAL ACCESSORIESThe machine can be fitted with a wide range of optionalaccessories, (Terex sales network). Check theaccessories, which can be fitted.The standard overload warning system installed on thevehicle enables the operator to work under the safestconditions. At the machine starting, the overloadwarning system carries out a diagnostics of all LED’sthen sets to the first green LED signaling the properfunctioning of the instrument. Refer to 3B6 manual formore information.57.4400.0100 TX51-19M-1-SM 01-29-0225