SQL Battery Monitor Data Manager User's Guide - Alber

Program Installation and Options4.4. Configuring BMDM to Run as a Windows ServiceThe BMDM can be run as a service so the application will continue to run in the backgroundeven after the user logs off Windows. The following describes how to configure the BMDMsoftware as a service.Note: the BMDM uses the "AlwaysUp" third party application to run the BMDM as a service.It is automatically installed with the BMDM software package starting with versions 5.86and SQL 6.33 or later.To Setup the BMDM as a service using the “AlwaysUp” application, do the following:1. Check if your operating system is 32 or 64 bit.2. Click on the appropriate shortcut to install the BMDM Servicea. For 32-bit operating system, click on Start, All Programs, Alber, MPM Manager,then click on the shortcut Install BMDM Service 32-Bit.b. For 64-bit operating system, click on Start, All Programs, Alber, MPM Manager,then click on the shortcut Install BMDM Service 64-Bit.Note: Depending on your operation system, this message may appear. Click on Thisprogram installed correctly to finish the installation.Figure 2. AlwaysUp Program Compatibility Assistant3. Type Windows key + R and enter Services.msc and check for the BMDMService(managed by AlwaysUpService) entry. Right click the entry and click Start to startthe service.4-2