SQL Battery Monitor Data Manager User's Guide - Alber

Programming Battery Setup for the MPM19.7. Battery Setup: Digital Output (MPM)String View > Setup|Battery|Digital OutputThe MPM has three optional relay contact control outputs you can define to trigger on analarm event.Figure 74. Battery Setup - Digital Output (MPM)After defining an Output Name and Trigger Name, the associated digital output can changestate on an alarm to control a user-selected device. If you select Latch, the output latches. Therelay is a Form C contact that de-energizes upon alarm condition reset.Output Name - Type a name that describes the external device being controlled.Trigger Name - From the drop-down list, select a parameter that energizes theControl Output relay contact.Enable - Select Enable to energize a rear panel Control Output contact on a trigger event.Latch - When selected, the Control Output contact energizes until manually reset. If notselected, the Control Output de-energizes when the trigger event clears.19-11