Expansion joints - Fip Industriale

More documents

Recommendations

Info

UNDER PAVEMENT ROAD JOINTSuP.P.This water-proof expansion joint is suitable to absorb longitudinal and transverse displacements of the deckswith span up to 25 metres and covering gaps of up to 50 mm.It consists of:• anchoring system consisting of steel anchor clamps (anchor rods) of suitabledimensions and section;• CNR 10018/85-compliant reinforced rubber elements, to be fixed to theslabs, consisting of central bridging plate and two steel bearing elements,subject to prior laying of epoxy resin bedding;• hypalon gutter, fixed to the two slab heads by epoxy plaste.P.P.P.P.POS. DESCRIPTION MATERIALA Gap-covering plate Dielectric vulcanized rubberBM12 Anchoring systemC Gutter HypalonDPouring of modified bitumenE Epoxy plaster S <strong>Fip</strong> 180F Restoring of base plane Fibre-reinforced cement mortarGBinderHRoad surface16
uSFE 90/65 ASJoint 90/65 AS (levelled wings) was specifically designed for highway use within structures creating longitudinalmovements of ± 15 (mm), vertical movements up to 10 mm.It consists of an extruded rubber bellows, vulcanized to two 65x80x9 mm “T”-profiles and anchored to the slab by clamps of suitable diameter, placed atcentre distance of 240 mm.The extruded rubber, together with the steel profiles it is vulcanized to, makesup a water-tight system and seamlessly covers the entire width of the roadbed.Water-tight capacity around the areas close to the joint is ensured by appropriatewater-proof materials.SFE 90/65 ASSFE 90/65 ASPOS. DESCRIPTION MATERIALA 80x80x9 “T” profile S235JR EN 10025B Vulcanized rubber profile CR 65 Sh/A CNR 10018C A.M. clamp Ø16X15 ÷200 FeB 44KDPavement• GUAMÀ BRIDGE - BRASILsupply of GPE 330 S series expansion joint17
Page 2: • DARWIN BRIDGE, EAST FLYOVER - P
Page 5: uRANExpansion joint made of:• CNR
Page 9 and 10: uRAN PWater-proof expansion joint c
Page 11 and 12: Upon request, it is possible to per
Page 13 and 14: uGPWater-proof expansion steel fing
Page 15: UNDER PAVEMENT ROAD JOINTSuMSThis t
Page 19 and 20: uGTF (cold polymeric buffer joints)
Page 21 and 22: JOINTTYPETOTAL MOVE-MENT (mm)HEIGHT
Page 23 and 24: ANCHORSFIP Industriale joints are a

Expansion joints - Fip Industriale

Create successful ePaper yourself

Delete template?

Save as template?