Electrical - Custom Bikes by Mike

For the Dealer Nearest You, Call: 800-729-3332 

Electrical 

6 

6.01 

6


6 

Electronic Ignition 

Crane Multi-Spark Ignition for Twin Cam 88 ® Models 

• Works with stock coil for outstanding performance on any bike 

• Stock crankshaft position sensor is used to establish accurate base 

timing. Initial timing can be set from -5° to +4°, rear cylinder timing can 

be offset from -5° to +4°. Timing is easily adjusted via a rotary switch 

• For maximum horsepower, torque and reliability, contains ten advance 

curve families, selected via rotary switch. You can select the exact 

advance curve you want for engines that are from factory-stock to 

wildly modified 

• User programmable advance curves easily created on or off the bike 

• Requires HI-4 Powerlink Programming software to program this ignition 

(CC #640271 sold separately) 

• Full multi-spark performance; up to nine sparks at idle, three sparks up 

to 6,000 rpm 

• Easier starting, hot or cold, plus better low-speed driveability and 

off-idle response. Stops plug fouling and lean-surge 

• Low-profile, black anodized, aluminum housing dissipates heat build-up 

for added longevity 

• Mounts in place of the stock module, plugs into the stock wiring connectors. 

• Works with stock security system, for added protection 

24959 Fits carbureted Twin Cam 88 ® models from 1999 thru 2003 . .$319.54 

640271 Powerlink Programming software . . . . . . . . . . . . . . . . . . . . . . . . . .$208.00 

Crane ‘HI-4’ Powerlink Software 

This optional software kit provides a means for optimizing the ignition timing 

for radical head configurations, custom pipes, big bore kits, aggressive 

cams and other performance modifications. 

• Use this kit with Crane’s programmable ignitions (CC #’s 640270, 24959) 

• Can program ignitions on or off the bike 

• Allows a minimum and maximum curve with interpolations for intermediate 

steps via the module advance slop switch 

• Compatible with Pentium 75 or faster processors running Windows 95 or 

later 

• Easy editing options; use a mouse to click and drag points on the graph 

or edit the numerical value like a spreadsheet 

• Built-in diagnostics and online help screens allow for easy troubleshooting 

of connections and programming difficulties 

• Set-up wizard that performs the installation of the software almost 

effortlessly 

640271 HI-4 Powerlink software . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$208.00 

6.02 

Prices appearing in this catalog are Suggested Retail Price and are subject to change* 

Crane ‘HI-4’ Ignition, Coil and Plug Wire Kit 

Includes Crane HI-4 single fire ignition, single fire performance dual coil 

and reactive spiral core silicone spark plug wires. A complete modern 

ignition kit for Big Twins from 1970 thru 1999 (except Twin Cam 88 ® 

models), and Sportster ® models 1971 thru 2003. 

24548 Complete kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$425.89 

Note: Sportster® models from 1971 thru 1982 and Big Twins from 1970 thru 1983 require that 

mechanical advance units and point ignitions, or early electronic ignitions and rotors be 

replaced by an OEM 32402-83 ignition timing rotor (CC #59725). 

Crane ‘HI-4’ High-Performance Ignition Systems 

Crane’s high-performance electronic ignitions have the entire unit mounted 

directly to the ignition timing plate for ease-of-installation and trouble-free 

operation. They’re available in single-fire and dual-fire “race” models as 

well as an “EPA-friendly” version that is certified legal for use in all 50 states 

(E.O. #D-225-43). They all feature fully-adjustable advance curves, switching 

for kick or electric start, a tachometer output, and a rev-limiter that’s 

adjustable from 4000 to 8000 RPM. The “race” single-fire kit has adjustable 

rear cylinder timing, and both single-fire kits have the necessary circuitry to 

correct the read-out of the electronic tachometers on late-model motorcycles. 

They fit all Sportster ® models from 1983 to present and Big Twin models 

from 1984 thru 1999 that still have their Original Equipment ignition timing 

rotor in place. They may also be installed on all Sportster ® models from 1971 

thru 1982 and Big Twins from 1970 thru 1983 when their mechanical 

advance units and point ignitions, or early electronic ignitions and rotors are 

replaced by an OEM 32402-83 ignition timing rotor. Detailed installation 

instructions are included. 

24511 Dual-fire “race” ignition . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$233.84 

24512 Single-fire “race” ignition . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$257.19 

24513 Single-fire “street-legal” ignition for all Evolution ® Sportster ® 

models from 1986 thru 2003 (except XL1200S) and non-EFI 

Evolution ® Big Twin models from 1984 thru 1999 . . . . . . . . . . . .$257.19 

Note: Crane recommends the use of Spiral core spark plug wires and high-performance coils 

with at least 2 ohms primary resistance for these ignitions. Ignition unit will not work in conjunction 

with racing air shifter installed.

Crane Multi-Spark Hi-4E 

‘Plug-N-Go’ Ignition Kits 

Complete high-performance ignition featuring 

proven multi-spark technology and adjustable 

advance curves that produce significant 

improvements in starting, smoother running from 

idle to peak rpm, increased mid-range 

torque curves and more peak horsepower. 

Kits include a Fireball Hi-4E programmable 

module, high-intensity single fire coil, and 

double silicone 8.5mm FireWire sparkplug 

wires. 

Crane ‘Hi-4E’ High-Performance Ignition Modules 

Multi-spark technology compatible with stock or high-performance Crane 

coils. Modules are equipped with a model year-specific wiring harness, 

including the correct connector. Crane Hi-4E ignition modules combine 

high-performance with convenient ‘Plug-N-Go’ installation for late-model 

bikes. Features include fully-adjustable advance curves, a switch for kick or 

electric start, tachometer output, and a rev-limiter adjustable from 900 to 

9900 RPM in 100 rpm increments. 

With 8-pin ‘Deutsch’ connector for carbureted FLT, FLHT, FLHS and Road 

King ® models from 1994 thru 1998, Softail ® and FXR models from 1996 thru 

1999, Dyna Glide models from 1996 thru 1998, and Sportster ® models 

(except XL1200S) from 1994 thru 1997 

24520 Complete ‘Plug-N-Go’ kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$465.16 

24646 Ignition module ONLY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$298.81 

With 7-pin ‘Cannon’ connector for Sportster ® , FLT, FLHT, FLHS and Road 

King ® models from 1991 thru 1993, or Softail ® , FXR and Dyna Glide models 

from 1991 thru 1995 (can be fitted to earlier models with the additional 

purchase of a CC #12419 wiring harness adapter) 

24521 Complete ‘Plug-N-Go’ kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$465.16 

24645 Ignition Module ONLY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$298.81 

Spyke ® Hi-Performance 

Ignition Systems 

Using the latest electronic designs, Spyke’s ignition 

system delivers the hottest spark possible, providing 

easier starting, better combustion and more power. 

In-The-Cone Multi-Spark Single-Fire Ignition 

Multi-spark photoelectric trigger fires the spark 

plug up to four times on each compression stroke. 

Completely fits in the nosecone and works with 

Spyke coils which have a fast voltage rise time to 

meet the demands of multiple discharge. 

28672 Fits most models from 1970 thru 2000 

(except Twin Cam 88 ® models) . . . .$259.99 


Crane ‘HI-4’ Programmable Ignition 

• Works in all applications as the original HI-4 with the same ignition coils 

• Proven Multi-Spark technology for cleaner firing, easier start-ups 

• Digital rev limiter. Adjustable from 1500 to 9900 rpm in 100 rpm increments 

takes the guesswork out of setting the ignition 

• Selectable modes cover both single and dual fire applications and allow 

the selection of custom advance curve 

• Adjustable advance curves allow the use of pump gas with high performance 

modifications 

• Status LED aids diagnostics and setting static timing 

• Programming port allows for programming custom advance curves 

on or off the bike 

• Customize advance curves for modified engines, allows up to 10 custom 

curves set via the module advance slope switch 

• Soft urethane potting protects electronics from dirt, heat and vibration 

• Fiberglass sleeved wire harness protects against chaffing while remaining 

flexible to allow easy wire routing 

• Requires HI-4 Powerlink Programming software to program this ignition 

(sold separately) 

• Fits all carbureted Big Twin models from 1970 thru 2003 

640270 HI-4 ignition ONLY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$280.36 

640271 Powerlink software . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$208.00 


In-The-Cone Standard Ignition 

A dual-fire ignition system with a photo-electric 

trigger. Use with 3 ohm coils. 

28659 Fits most models from 1970 

thru 1998 . . . . . . . . . . . . . . . . . . . . . . . . . . .$222.99 

RevTech ® 80,000 Volt Coils 

These dual tower coils are for use with single plug 

heads, and generate extremely high voltage for 

the hottest spark possible. For use with Spyke and 

other high-performance ignitions requiring coils 

with 3 ohms of primary resistance. 

28673 Single-fire coil . . . . . . . . . . . . . . . . . . . . . .$123.00 

28714 Dual-fire coil . . . . . . . . . . . . . . . . . . . . . . . . .$69.99 

09376 Coil bracket . . . . . . . . . . . . . . . . . . . . . . . . .$96.56 

6.03 

Apparel 

Bike Kits 

& Trailers 

Seats 

& Bags 

Foot 

Controls 

Hand 

Controls 

Lighting 


Exhaust 

Intake 

Engine 

Gaskets 

Tranny 

& Clutch 

Driveline 

Wheels, 

Tires 

& Brakes 

Frames 

Forks 

& Shocks 

Sheetmetal 

General 

Cross 

Reference


6 


630102 

6.04 

630103 

630101 

Dynatek 2000iP Programmable Ignition Systems 

Dynatek has upgraded their popular 2000i ignitions to be fully programmable 

when used with the optional programming kit (see below). 

• Completely self-contained under the cam cover for a clean look 

• Heavy-duty billet aluminum construction for long life 

• Single fire operation down to zero rpm for easier cranking and kicking 

• Operates all combinations of single fire or dual fire with single plug or 

dual plug heads (when used with appropriate coils) 

• Eight advance curves to cover a broad range of engine configurations 

and riding styles 

• Engine over-rev protection adjustable from 6000 to 7500 rpm 

• Adjustable timing retard for nitrous and turbo applications 

• VOES indicator tells you at a glance, the status of the VOES switch 

• Built-in tach driver can be used to activate shift lights and auto-shifters 

• Easy static timing with built-in timing indicator 

• Intelligent over-current/short-circuit protection, active dwell control and 

over-voltage protected 

• Fits Sportster ® models from 1970 thru 2003 and all Big Twin models 

from 1970 thru 1999 (except Twin Cam 88 ® models) 

630108 Dyna 2000i module ONLY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$330.00 

630101 Complete kit for single plug/single fire applications 

(includes one DC6-5 'Twin Fire II' 3 ohm coil) . . . . . . . . . . . . . . . .$525.00 

630102 Complete kit for single plug/single fire applications 

(includes two DC3-1 single tower 3 ohm coils) . . . . . . . . . . . . . .$485.00 

630103 Complete kit for dual plug/single fire applications 

(includes two Dyna DC1-1 dual tower 3 ohm coils) . . . . . . . . . .$485.00 

Optional Programming Kit for Dynatek 2000iP Ignitions 

Adds full PC programmability and data recording to Dynatek TC88-2P 

ignitions. 

• 8 point fully definable wide open throttle curve 

• 8 point fully definable part throttle curve 

• Rev limit programmable in 50 RPM steps 

• Programmable dead cranking revs 0-5 

• Programmable rear cylinder offset, 

total of +/- 10° 

• Programmable rev limiter 

• Maximum RPM and Seconds near rev limit 

• Total engine hours/time at wide open throttle 

• Number of engine starts (two minutes running counts as one) 

• Longest time operating at wide open throttle 

630100 Programming kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$145.00 


Dynatek 2000TC Digital Ignition for Twin Cam 88 ® 

Models with Carburetors 

The popular 2000TC is now offered in a PC programmable version in addition 

to the original version. Both ignitions feature 16 advance curve 

options in three groups, and 8 rev limiter settings in increments of 250 rpm 

from 5750-7250 rpm. Compatible with stock and aftermarket performance 

coils, using stock sensors and OEM connectors, and the stock mounting. 

Also features advanced full digital accuracy, monitored current to provide 

full spark energy at all times and protection against electrical spikes and 

reverse polarity problems. Fit all carbureted Twin Cam 88 ® models from 

1999 thru 2003. 

630107 PC programmable ignition (Mfg #TC88-2P) . . . . . . . . . . . . . . . . .$330.00 

09604 Digital ignition (Mfg #TC88-2) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$330.00 

Optional Programming Kit for Dynatek TC88-2P Ignitions 

Adds full PC programmability and data recording to Dynatek TC88-2P ignitions. 





• Programmable rear cylinder offset, 

total of +/- 10° 


• Total engine hours/time at wide 

open throttle 

• Max RPM and seconds near rev limit 

• Number of engine starts (two minutes 

running counts as one) 


630099 Programming kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$145.00 

Standard Motor Products Ignition Sensors 

Ignition sensor assembly is a direct replacement for your stock sensor. 

609994 For Touring models from 1980 thru 1993, Softail ® models 

from 1984 thru 1985, FXR and Sportster ® models 1980 

thru 1994 (repl. OEM 32400-80A) . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$39.49 

609995 For Dyna Glide models from 1991 thru 1995 

(repl. OEM 32404-90) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$39.49 

609996 For Touring models from 1994 thru 1995, Sportster ® models 

from 1995 thru 1997 and XL 1200S models from 1998 thru 

2003 (repl. OEM 32400-94) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$39.49

Dynatek 2000 Fully Programmable Digital Ignition Systems 

These programmable digital ignitions are now fully programmable and adaptable to the 

performance level of any bike using the optional software. The ignitions themselves still 

offer adjustable advance curves, rev-limit, VOES switch on or off, retard mode for use 

with nitrous or turbo bikes, and single or dual fire triggering. Options are set using 

switches on the back of the unit. Designed to be plug-compatible with connectors on 

factory ignitions on most models made since 1984. All of these ignition systems and 

modules use stock ignition pick-up, but will not work on fuel injected engines. 

Complete Kits with Coils 

Complete-in-one-box solution with Dyna 2000 ignition. Dyna high-performance coils, 

wiring and instructions. 

630105 Fits Softail ® models from 1996 thru 1999 and Dyna Glide models from 1996 

thru 1998 (Mfg #SFK-3P) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$525.00 

630104 Fits all Softail ® and Dyna Glide models from 1984 thru 1995 (Mfg #SFK-1P) .$525.00 

Ignition Modules Only 

With 8-pin ‘Deutsch’ connector for carbureted Touring models from 1994 thru 1998, 

Softail ® and FXR models from 1996 thru 1999, Dyna Glide models from 1996 thru 1998, 

and Sportster ® models from 1994 thru 1997. 

630109 Dual or single fire (Mfg #DD2000-HD1E8P) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$330.00 

630110 Dual fire ONLY (Mfg #DD2000-HD2E8P) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$254.00 

With 7-pin ‘Cannon’ connector for Sportster ® and Touring models from 1991 thru 1993, 

or Softail ® , FXR and Dyna Glide models from 1991 thru 1995 (can be fitted to earlier 

models with the additional purchase of a CC #12419 wiring harness adapter). 

630111 Dual or single fire (Mfg #DD2000-HD1EP) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$330.00 

630106 Dual fire ONLY (Mfg #DD2000-HD2EP) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$254.00 

Optional Programming Kit for Dynatek 2000 Ignitions 

Adds full PC programmability and data recording to Dynatek 2000 ignitions. 





• Programmable rear cylinder offset, total of +/- 10° 


• Maximum RPM and Seconds near rev limit 

• Total engine hours/time at wide open throttle 


• Number of engine starts (two minutes of running 

counts as one) 

630097 Programming kit for CC #’s 630111, 630106 and 630104 (Mfg #DIPK-2) . . . . .$145.00 

630098 Programming kit for CC #’s 630109, 630110 and 630105 (Mfg #DIPK-3) . . . . .$145.00 

Wiring Harness Adapters 

12419 Permits the installation of Part #’s 630111 and 630106 ignition modules on all 

Evolution ® Big Twins from 1984 thru 1990, and Evolution ® Sportster ® models from 

1986 thru 1990 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$53.00 

12568 Seven-to-eight pin adapter. Permits the installation of modules with 7-pin 

‘Cannon’ connectors on late model bikes with 8-pin ‘Deutsch’ connectors . . .$60.00 



Dyna ‘S’ Ignition Systems 

Systems use magnetic rotors with Original Equipment spark 

advance mechanisms to retain the factory advance curves and 

replace points and condensers with a high-performance dual 

or single-fire system. Dyna ‘S’ ignitions change timing less 

than 3° from 0-8000 RPM and feature improved performance, 

easy installation and a 3-year factory warranty. Completely 

self-contained, and install behind points cover. 

Note: For proper results, matching high-performance coils must be installed in 

conjunction with the CC #’s 12302 and 12369 single fire kits. 

Complete Ignition Kits with Dyna Coils 

Complete solution with Dyna S ignitions, Dyna high-performance 

coils, wiring and detailed instructions. 

12097 Dyna S single fire kit . . . . . . . . . . . . . . . . . . . . . . . . .$375.00 

12098 Dyna S dual fire kit . . . . . . . . . . . . . . . . . . . . . . . . . . .$258.00 

Kits without Advance Unit Assembly 

Fit Sportster ® models from 1971 thru 1979 and Big Twins from 

1970 thru 1979 using OEM advance unit. 

12319 High-performance system (MFG #DS6-1) . . . . . .$170.00 

12302 Single-fire ignition system (MFG #DS6-2) . . . . . .$208.00 

Ignition Kits with Advance Unit Assembly 

We’ve added our ‘Premium’ advance unit assembly to the 

Dyna ‘S’. Fits Sportster ® and most Big Twin models from 1970 

thru 2003 (except Twin Cam 88 ® models). 

12368 High-performance system . . . . . . . . . . . . . . . . . . . .$156.99 

12369 Single-fire ignition system . . . . . . . . . . . . . . . . . . . .$182.99 

6.05 

Apparel 

Bike Kits 

& Trailers 

Seats 

& Bags 

Foot 

Controls 

Hand 

Controls 

Lighting 


Exhaust 

Intake 

Engine 

Gaskets 

Tranny 

& Clutch 

Driveline 

Wheels, 

Tires 

& Brakes 

Frames 

Forks 

& Shocks 

Sheetmetal 

General 

Cross 

Reference


6 


Ignition Kit for Twin Cam 88 ® 

Models by Daytona Twin Tec ® 

Kit includes the programmable ignition module 

(CCI #031005), Twin Tec ® ignition coil, and 

Universal Wire Set. The Twin Tec ® ignition coil 

has low resistance primary windings and is compatible 

with all OEM, Screamin’ Eagle ® , and 

aftermarket ignition systems intended for carbureted 

Twin Cam 88 ® models. Fits all carbureted 

Twin Cam 88 ® models from 1999 thru 2003. 

640280 Complete kit . . . . . . . . . . . . . . . . . . .$340.00 

Programmable Ignition Modules 

by Daytona Twin Tec ® 

Special features: 

• More power with dyno tuning – optimized 

built-in advance curves and easy programming 

of custom curves 

• Full support of the new J1850 data bus used 

for communications with instrument cluster 

and turn signal/security module (TSM/TSSM) 

• Compatible with H-D ® scan tools, also allows 

recalibration of speedometer/odometer to 

accommodate tire and gear changes 

• Built-in data logging for last 30 minutes of 

engine operation (engine builders will find 

this highly useful for tuning, diagnosing 

problems, and reducing unjustified warranty 

claims) 

• Free demo software available for download 

on Daytona Twin Tec ® web site and custom 

advance curves (must use PC Link interface 

cable) 

• Fits carbureted Twin Cam 88 ® and Sportster ® 

models with 12-pin connector from 2003 to 

present 

640281 Programmable module ONLY . . .$285.00 

031008 PC Link interface cable . . . . . . . . . . .$72.99 

6.06 

‘Stand-Alone’ Ignition System 

for Twin Cam 88 ® Models 

by Thunder Heart Performance 

This innovative ignition is designed for use in 

custom bike applications were a twin cam motor 

and crank sensor is going to be used. It consolidates 

all ignition components into a small easyto-mount 

package. Wiring the ignition system is 

a snap, because it includes components needed 

to hook up the ignition to custom bike application. 

No factory ignition harness required. 

Includes 'Smark Link' software that allows the 

user to fully program the front and rear spark 

timing and rev limit with a lap top computer. 

• Simplifies the installation of a Twin Cam 88 ® 

motor into a custom bike 

• Complete ignition system: Ignition module, 

Ignition coil 

• Consolidates all ignition functions in a compact, 

easy-to-mount package 

• Integrated high-output single fire operation 

• Real-time diagnostic features aid in troubleshooting 

and tuning 

• Utilizes the factory crank trigger for 

improved starting and performance 

• Billet aluminum housing is weather and 

vibration-proof 

• Includes comprehensive instructions for 

installation 

• Custom mounting using 1/4"-20 bolts 

at 2" center-to-center hole spacing 

• Fits custom bikes using Twin Cam 88 ® engines 

and Evolution ® engines with crank sensors 

640330 Complete kit . . . . . . . . . . . . . . . . . . .$306.12 


Programmable Ignition Module 


This is as a plug-in replacement for carbureted 

Big Twin and Sportster ® models. 

• Mounts same as Original Equipment ignition 

• Integrated high output, single fire 

• Includes Smart Link software that is fully programmable 

for front and rear spark timing 

and rev-limiter 

• Adjustable dwell to accommodate performance 

coils 

• Improved starting and performance with 

crank trigger signal 

• Rugged billet case and weather/vibration 

proof design 

• Real-time diagnostic software aides tuning 

and troubleshooting 

• Programmable nitrous activation, shift light, 

and staging rev-limiter outputs 

• Permits the use of aftermarket tachometers 

• Fits all carbureted Big Twin and Sportster ® 

models from 2004 to present 

640336 Programmable ignition . . . . . . . . .$215.55

Compu-Fire ® Ignition System 

for High Compression Motors 

Eliminate pinging and misfire in high compression 

and large displacement engines. Advance 

curves range from fairly steep for near stock to 

more gradual for high-horsepower engines. All 

ignition circuits are contained in the nose cone 

and there is an ‘Accu-Ray’ static timing LED. 

Single or dual fire operation is switch-selected, 

and dual sensor circuits eliminate hard starts 

and give accurate spark timing even at high 

RPM. Eight advance curves, adjustable rev-limiter 

(6,000 to 7,500 rpm) and two VOES modes. 

17178 Fits all carbureted Big Twins from 1970 

thru 2000 (except Twin Cam 88 ® models) 

and Sportster ® models from 1971 

thru 2003 . . . . . . . . . . . . . . . . . . . . . .$244.80 

23231 Similar to CC #17178 but designed 

for kick start models . . . . . . . . . . . .$244.80 

Mallory ® Unilite ® Breakerless 

Ignition 

Permits an easy conversion from point ignition 

to the self contained Unilite ® module which has 

no moving parts to wear out. Using Mallory's 

time tested breakerless ignition circuit, combined 

with modern surface mount Thermal 

Clad ® construction, the Mallory Unilite ® can 

drive any ignition coil or combination of coils 

with a total primary resistance of at least 2.0 

ohms. We recommend ignition coils with 2.0 to 

3.0 ohms for racing applications and 3.0 to 4.0 

ohms for street use. Conversion is an easy threewire 

connection. . . . . . . . . . . . . . . . . . . . . . . . .$126.86 

26915 Fits all Big Twin and Sportster ® models 

with points, and models converted to 

mechanical advance and points 

Compu-Fire ® ‘Elite 1’ Digital 

Electronic Ignitions 

All circuits are contained on the timing plate. 

There’s no module or anything else to mount! 

The HDE-1 and HDE-2 have fixed advance curves 

and 6500 RPM rev-limiters to protect the engine. 

Model HDE-3 has eight advance curves and an 

eight-stage rev-limiter adjustable from 6000 to 

7500 RPM or off. All models have the Accu-Ray 

timing LED for precise timing and system check. 

They work with the factory VOES switch 

(HDE-3 offers dual-range operation). Fit all 

carbureted Big Twins from 1970 thru 2000 

(except Twin Cam 88 ® models) and Sportster ® 

models from 1971 thru 2003. 

17174 HDE-1 dual fire . . . . . . . . . . . . . . . .$183.87 

17175 HDE-2 single fire . . . . . . . . . . . . . .$183.87 

17176 HDE-3 single or dual fire . . . . . . .$244.80 

Accel ® Single/Dual Fire Ignition 

This ignition unit works with both single or dual 

fire coils, eliminating the need to buy a new 

ignition when you change coils. Hours of dyno 

testing went into creating this ignition so that 

it is simple to use and delivers the premium 

performance you expect from Accel ® . It has 14 

preset ignition curves to cover a stock engine 

through exhaust and intake changes to a full 

blown big inch, high compression motor. Other 

features include an easily selectable rev limiter 

and L.E.D. timing light for quick static timing. 

The harness has a V.O.E.S. input, tachometer 

output and is externally grounded for better 

reliability. The housing is machined out of aluminum 

for better heat dissipation. . . . . . .$282.06 

668013 Fits Big Twins from 1971 thru 1999 

(except Twin Cam 88 ® models) and 

Sportster ® models from 1983 thru 2003 



Compu-Fire ® Electronic Ignitions 

These digital ignitions use advanced Hall-Cell 

triggering and surface mount technology with a 

convenient built-in ‘Accu-Ray’ static timing LED. 

They completely eliminate the rev-limiter and 

have built-in adapters to correct the tachometer 

output. Fit non-EFI Evolution ® Big Twin models 

from 1970 thru 2000 and Sportster ® models from 

1971 thru 2003. 

Dual-Fire Ignition Systems 

17170 Fits single plug heads . . . . . . . . . .$109.99 

Single-Fire Ignition Systems 

17171 Fits single plug heads . . . . . . . . . .$141.99 

Note: 1980 and later models fitted with Original Equipment 

electronic ignition systems will require the additional purchase 

of a mechanical advance unit. 

Ignition Parts 

Anyone who has ever told you that 

the stock electronic ignition either 

works or it doesn’t, is WRONG! Thousands of 

dyno runs have proven to us that your stock sensor 

can be operating at less than 100% efficiency 

without you ever knowing it. 

17302 Ignition sensor assembly for many 

models from 1970 thru 1999 

(replaces OEM 32400-83A) . . . . . . .$43.09 

59725 Ignition rotor for many models from 

1983 thru 2002 (except models 

with fuel injection) replaces 

OEM 32402-83 . . . . . . . . . . . . . . . . . . . .$7.89 

59726 Ignition rotor screw and washer 

(pack of ten) replaces OEM 2611B .$6.29 

6.07 

Apparel 

Bike Kits 

& Trailers 

Seats 

& Bags 

Foot 

Controls 

Hand 

Controls 

Lighting 


Exhaust 

Intake 

Engine 

Gaskets 

Tranny 

& Clutch 

Driveline 

Wheels, 

Tires 

& Brakes 

Frames 

Forks 

& Shocks 

Sheetmetal 

General 

Cross 

Reference


6 

Ignitions & Ignition Covers 

Daytona Twin Tec ® Fully Programmable Ignitions 

These ignitions are an upgrade from the non-adjustable stock OEM unit, and feature advanced 

electronics set into a machined billet aluminum housing. Four rotary switches are used to set the 

operating modes (such as single or dual fire), adjust the timing advance, and select the RPM limit. 

Two diagnostic LED's indicate the status and the state of the vacuum switch (VOES). The status LED is 

also used to indicate top dead center (TDC) for easy timing set-up. A special feature allows use of the 

tachometer wire for a link to a laptop PC. While the customer does not require the PC link for any normal 

set-up or operation, it can be used to access additional features for precise dyno tuning (such as 

programming a custom advance curve and setting rear cylinder timing offset). Windows compatible 

software is freely available for download at the company website. PC Link cable sold separately. 

031003 Fits most models from 1970 thru 1999 (except Sportster ® models from 1998 to present and 

Twin Cam 88 ® engines) using stock style electronic ignition trigger rotor (not included) . .$279.89 

031005 Fits carbureted Twin Cam 88 ® models from 1999 thru 2003 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$280.79 

Note: Sportster® models from 1971 thru 1982 and Big Twins from 1970 thru 1983 require that mechanical advance units and 

point ignitions, or early electronic ignitions and rotors be replaced by an OEM 32402-83 ignition timing rotor (CC #59725) 

Accessories 

031004 PC Link interface cable for CC #031003. Allows uploading custom advance curves . . . . . . . . .$74.99 

031008 PC Link interface cable for CC #031005. Allows uploading custom advance curves . . . . . . . . .$72.99 

Screamin’ Eagle ® Hi-Performance Ignition Module 

This is an Original Equipment part. Features an 8000 rpm rev-limiter. 

Simple plug-and-play installation. 

75220 Fits FXR, Dyna Glide and Softail ® models from 1991 thru 1995, 

and Touring models from 1991 thru 1993 (7-pin ‘Cannon’ 

connector). May be installed on 1984 thru 1990 models 

when a CC #12419 harness is used (repl. OEM 32421-85B) . . . . . .$186.99 

Sensor Plate Studs 

These are Original Equipment 

parts. Fit all electronic ignition sensor 

plates and cone electronic ignitions. 

Pack of 10. . . . . . . . . . .$69.99 

75499 Replaces OEM 32606-82 

6.08 

Ignition Wire 

Hold-Down 

Chrome-plated die-cast hold-down 

secures the wire from the electronic 

ignition to the nose cone on 

Evolution ® Big Twin motors from 

1978 thru 1999. . . . . . . . . . . . . .$6.99 

78103 Sold each 

18908 

031005 


18907 

031003 

‘Live To Ride’ Ignition Module Covers 

Die-cast covers that fit all Sportster ® models from 1982 thru 2003. 

18907 Chrome . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$22.99 

18908 Gold . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$46.94 

Chrome Ignition Module Cover 

Chromed steel cover replaces the standard black metal cover on 

Sportster ® models from 1982 thru 2003. 

25254 Replaces OEM 66328-82T . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$15.59 

Ignition Module Bolt Kit 

Secure the ignition module cover on new Sportster ® models. 

Three-piece chrome-plated countersunk sockethead screw kit. 

32049 Fits models from 1998 thru 2003 

(module cover not included) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$8.49

25976 

26380 

25979 

26157 

Ignition Distributors 

A complete line-up of top-quality ignition distributors for all Big Twins 

from 1936 thru 1969. Both the 1936 thru 1965 double-bolt hold-down and 

the 1966 thru 1969 single-bolt hold-down style are available. Both versions 

are complete with advance mechanism, drive gear, points, condenser, 

breaker-to-coil wire, terminal adapter and a smooth chrome-finish cap. The 

1966 thru 1969 model also includes the hold-down clamp. The smooth style 

chrome cap is also available separately. 

25976 1936 thru 1965 complete distributor (2-hole mount) . . . . . . .$224.99 

25979 1966 thru 1969 complete distributor (1-hole mount) . . . . . . .$219.99 

Replacement Parts 

25978 Chrome cap for CC #25976 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$12.49 

26380 Chrome cap for OEM distributor or CC #25979 

(repl. OEM 32589-65) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$10.99 

26157 Distributor hold-down clamp (repl. OEM 32516-66) . . . . . . . . . .$6.49 

Static Timer 

This static-timing device permits you to lock your advance position while 

you static-time it. Helps reduce kickback while promoting easier starts and 

smoother running. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$13.89 

20134 Fits all models with point-type ignitions from 1970 thru 1978 

Ignition 

Spyke ® Electronic Ignition Distributor 

A truly innovative product for all generator Big Twins. 

The polished billet distributor permits installation of 

a CC #28672 Spyke Photoelectric multispark ignition 

module on early models (requires 12-volt system). The 

two-piece design allows the distributor to be installed 

without removing the front cylinder. The shaft is 

installed first, and then the distributor head is 

installed onto the shaft. Ignition times off the rear 

cylinder. 

28608 Fits 1936 thru 1969 Big Twins with Spyke ® electronic 

ignition system only (CC #28672) . . . . . . . . . . . . . . . . . . . . . . . . . .$239.99 

28672 Spyke ® Photoelectric multispark ignition module . . . . . . . . . . .$259.99 

Mallory ® Unilite ® 

Distributor 

For faster, easier starting, Mallory’s 

12-volt electronic ignition system 

delivers performance and reliability 

at an affordable price. The billet 

aluminum distributor utilizes the 

Unilite ® ignition module, and a 

heavy-duty fully adjustable 

mechanical advance unit. Includes 

detailed instructions and wiring 

harness. . . . . . . . . . . . . . . . . . . . .$321.89 

26916 Fits Big Twins from 1936 

thru 1969 

Note: When using stock heads, no head 

removal is required 


Magneto Coil 

Fits all Original Equipment Harley- 

Davidson ® magnetos as well as the 

Morris Magnetos. . . . . . . . . . .$107.19 


Original-Style 

Distributor Cover 

Fits Sportster ® and K models, 45s 

and Big Twins from 1936 thru 

1964. Sold each. . . . . . . . . . . . .$12.89 

12027 Replaces OEM 32589-36 

6.09 

Apparel 

Bike Kits 

& Trailers 

Seats 

& Bags 

Foot 

Controls 

Hand 

Controls 

Lighting 


Exhaust 

Intake 

Engine 

Gaskets 

Tranny 

& Clutch 

Driveline 

Wheels, 

Tires 

& Brakes 

Frames 

Forks 

& Shocks 

Sheetmetal 

General 

Cross 

Reference


6 

Ignition 

Roller Bearing Advance Kit 

Smooth advance for ignition timing has reached a new level of performance and reliability 

with our roller bearing advance kit. Roller bearings at the pivots of the advance weights 

gives the proper amount of ignition advance at the right time every time. Included are 

all the parts to make the ignition up-to-date with better-than-new performance. It 

includes the roller bearing weights installed on a quality advance unit shaft and plate, 

circuit breaker base plate, points cam, wiring harness, springs and timing screw. This kit 

fits 1970-early 1978 Big Twin models or 1971-early 1978 Sportster ® models as well as 

many models from late 1978 thru 2003 when converting to point-style ignitions. 

12402 Complete kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$57.99 

12413 Replacement advance weights with roller bearings, pair 

(only fits CC #12402 kit) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$25.99 

6.10 

12321 

12326 

12327 

12322 


12327 Complete advance unit assembly 

including bare points plate and 

cover timing bolt . . . . . . . . . . . . . . . . .$38.99 

12321 Circuit breaker base assembly with 

imported points and condenser 

(repl. OEM 32577-70) . . . . . . . . . . . . .$13.99 

12322 Circuit breaker cam 

(repl. OEM 32542-70TA) . . . . . . . . . .$19.99 

12323 Breaker springs (repl. OEM 32605-70T) 

pack of 10 . . . . . . . . . . . . . . . . . . . . . . .$12.49 

12324 Breaker assembly weights 

(repl. OEM 32522-70T) . . . . . . . . . . . .$10.99 

12323 

12335 

12328 

12324 

25445 


25446 

25447 

Fits Sportster ® Models from 1971-Early 1978 and 

Big Twins from 1970-Early 1978 

The high-performance point set features a heavy-duty 32-oz. 

spring to resist ‘point bounce’ at high RPMs. 

25490 Tune-up kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$17.75 

25445 Point set (repl. OEM 32661-70) . . . . . . . . . . . . . . . .$10.63 

25446 High-performance point set . . . . . . . . . . . . . . . . . . .$13.41 

Fits Sportster ® and K Models (except Magneto) from 

1954 thru 1970 and Big Twins from 1948 thru 1969 

25491 Tune-up kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$14.63 

25447 Condenser (repl. OEMs 32726-30A, 30801-47) . . .$7.52 

Fits 1958 thru 1969 Sportster ® Models with Magneto 

25492 Tune-up kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$24.14 

12325 

12329 

12325 Advance unit shaft and plate 

(repl. OEM 32629-70T) . . . . . . . . . . . .$25.99 

12326 Timing screw (repl. OEM 3570T) 

pack of 10 . . . . . . . . . . . . . . . . . . . . . . .$19.99 

12328 Circuit breaker studs with screws 

and washers (repl. OEM 32601-78) 

pack of 10 . . . . . . . . . . . . . . . . . . . . . . .$19.99 

12329 Circuit breaker wires with terminals 

installed (repl. OEM 70456-73) 

pack of 5 . . . . . . . . . . . . . . . . . . . . . . . . .$17.69 

12335 Point terminals (repl. OEM 32670-70) 

pack of 10 . . . . . . . . . . . . . . . . . . . . . . . .$6.49 

25492 

12333 

Accel ® Tune-Up 

Kits and 

Components 

The tune-up kits 

include matched 

point sets with a 

compact mylar-insulated 

condenser and 

a packet of point cam 

lube. All components 

are sold each. 

12334 

Mag Points 

and Condenser 

High-quality American-made 

replacement points and condenser 

for Sportster ® models with magneto 

ignitions from 1958 thru 1969. 

Sold each. 

12333 Point set (repl. OEM 

29533-55A) . . . . . . . . . .$8.99 

12334 Condenser (repl. OEM 

29534-55A) . . . . . . . . . .$6.19

Premium ® Advance Unit 

with Blue Streak ® Points 

and Condenser 

Custom Chrome ® has combined it’s 

Premium ® advance unit assembly 

with hi-performance Blue Streak ® 

points and condenser. This kit is 

ideal for the replacement of worn 

out units or conversion to points 

from the electronic ignitions used 

on many models from late 1978 

thru 2003. These Blue Streak ® 

components are of the highest 

quality making this is one of the 

finest-quality point conversion kits 

on the market. . . . . . . . . . .$59.99 

17193 Fits Big Twin models 

from 1970-early 1978 

and Sportster ® models 

from 1971-early 1978 

Premium ® Advance Unit Assembly and Point Conversion Kit 

With countless thousands of units on the road, our advance unit assemblies offer Original Equipmentquality 

and easy repair or replacement of worn-out stock parts. They are perfect for converting complicated 

late-model electronic ignition systems to a simpler point ignition. Kits are 100% complete, 

with points and condenser mounted on the plate, with advance weight assembly and cam ready-toinstall. 

All of the necessary studs, washers, terminals and wire are included and even new chrome 

point cover screws. Fits 1970-early 1978 Big Twin models, 1971-early 1978 Sportster ® 17193 

models and many 

models from late 1978 thru 2003 when converting to point style ignitions. . . . . . . . . . . . . . . . . . . . . .$44.99 

12320 Complete kit (not shown) replaces OEM 32515-85T 

17192 

17191 

Blue Streak ® High-Performance Points and 

Condenser 

These Blue Streak ® lubri-points feature heavy-duty construction, 

lubriwick, oversize ventilated contacts and copper shunt. 

Available in a kit or individually. 

Point and Condenser Set 

17190 Fits Sportster ® models from 1971-early 1978 

and all Big Twins from 1970-early 1978 

(repl. OEMs 32661-70, 32726-30, 30801-47) . . .$20.54 

Points Only 

17191 Fits Sportster ® models from 1971-early 1978 

and Big Twins from 1970-early 1978 

(repl. OEM 32661-70) . . . . . . . . . . . . . . . . . . . . . . . .$14.39 

Condenser Only 

17192 Fits all Sportster ® and K models (except magneto) 

from 1954-early 1978 and Big Twins from 1930-early 

1978 (repl. OEMs 32726-30A, 30801-47) . . . . . . . .$6.34 

Ignition 

Standard Products Tune-Up Parts 

Top-quality tune-up parts from the manufacturer of Blue Streak Performance Products. 

All engineered to levels of performance that are much higher than ‘standard’. 

Tune-Up Kits 

17053 Fits Sportster ® models from 1971-early 1978 and all Big Twins from 1970-early 

1978 (repl. OEMs 32661-70, 32726-30, 30801-47) . . . . . . . . . . . . . . . . . . . . . . .$9.19 

Advance Weight Spring Sets 

Made from premium-grade spring steel in the 

USA and custom-tuned to correct your ignition 

advance rate. The heavy-duty set slows the ignition 

advance rate permitting the engine to build 

more RPM before full advance is reached. The 

stock replacement springs are a high-quality 

replacement for stock items that have worn out, 

and the custom set contains one of each spring 

to give a mid-range advance rate. Fit Big Twin 


Sold in pairs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$10.59 

23120 Heavy-duty 

23121 Custom 

23122 Stock replacement 


Stainless Steel Advance Unit 

with Blue Streak ® Points 

and Condenser 

American-made kits feature a stainless steel 

plate, pins, shaft, and heat-treated weights, 

Blue Streak ® points and condenser, wiring and 

hardware. Fit Big Twin models from 1970-early 

1978 and Sportster ® models from 1971-early 

1978, or models from late 1978 thru 1999 

when converting to point-style ignitions. 

17194 Complete kit (shown) . . . . . . . . . . .$122.99 

17189 Stainless steel advance unit 

assembly ONLY (includes cam 

and center bolt) . . . . . . . . . . . . . . . . .$93.99 

Replacement 

Mechanical Advance 

Weights 

High-quality weights are made in 

the U.S.A. and surpass Original 

Equipment part in durability and 

strength. Sold in pairs. . . . .$13.89 

23128 Fits all ignition systems 

with mechanical advance 

6.11 

Apparel 

Bike Kits 

& Trailers 

Seats 

& Bags 

Foot 

Controls 

Hand 

Controls 

Lighting 


Exhaust 

Intake 

Engine 

Gaskets 

Tranny 

& Clutch 

Driveline 

Wheels, 

Tires 

& Brakes 

Frames 

Forks 

& Shocks 

Sheetmetal 

General 

Cross 

Reference


6 

Coils 

24518 

24514 

Coils by Crane ® Cams 

Complements Crane HI-4 digital 

ignition systems and other highperformance 

ignition systems 

requiring coils with 2-3 ohms 

resistance. Single-fire coil combines 

two coils into one small 

package that fits neatly under 

Original Equipment coil covers. 

Dual-fire model is a high-output 

coil ideal for high-performance 

dual-fire ignitions or as a quality 

stock replacement. Dual-fire model 

has the same shape, size and 

mounting system as the Original 

Equipment coil. 

24518 Single-fire coil for ignitions 

requiring 2-3 ohm coil 

resistance . . . . . . . . .$147.83 

24514 Dual-fire coil for Big Twin 

models from 1980 thru 

1999 and Sportster ® models 

from 1980 thru 2003 

with 2.8 ohm coil resistance 

. . . . . . . . . . . . . . .$89.76 

Dynatek Dyna-Mite 

Coils 

Feature the same dependability 

and performance as the original 

‘Dyna’ coils and produce spark 

voltages in excess of 30,000 volts 

with spark energies second-tonone. 

All ‘Dyna’ coils are covered 

by a Limited Manufacturers 

Warranty against defects in materials 

and workmanship. . . . . . .$83.00 

12381 3.0 ohm for electronic 

ignitions (MFG #DC6-1) 

12382 5.0 ohm for use with 

points (MFG #DC7-1) 

6.12 

Single-Fire Coil 

by Crane ® Cams 

Delivers 15% greater spark energy 

and 50% longer spark duration. 3 

OHM coil for use with single-fire 

electronic ignitions and is designed 

for maximum spark energy output 

with Crane ® HI-4 and HI-4e ignitions. 

Also works with most aftermarket 

single-fire ignitions. Fits 

Shovelhead models from 1970 thru 

1984, Sportster ® models from 1971 

thru 1997 and Evolution ® Big Twin 


(except those equipped with fuel 

injection). . . . . . . . . . . . . . . . . .$159.19 


09423 

Dual-Fire Coils 

by Crane ® Cams 

Complements Crane’s HI-4 digital 

ignition systems and other highperformance 

ignition systems 

requiring coils with 2-3 ohms 

resistance. Smaller and lighter 

than the Original Equipment 

design. Provides significantly higher 

energy output yet easily fits the 

Original Equipment mounting 

bracket.Fits all Big Twin models 

models from 1980 thru 1999 and 

Sportster ® models 1980 thru 2003 

with 2.8 ohm coils. . . . . . . . . . .$89.76 


09422 

Dynatek Ignition Coils 

Dynatek coils for Harley-Davidson ® applications are high-quality 

American-made performance coils designed to provide spark 

voltages in excess of 30,000 volts and spark energy second 

to none. Coils may be installed in conjunction with Original 

Equipment V-Fire III ® and compatible after-market electronic 

and point-type ignition systems. Available in a 6-volt and 

four 12-volt versions with single and dual towers, these 

coils are the perfect answer for two or four plug heads. 

Additional brackets will be required for installation. 

Sold in pairs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$155.00 

09421 6-volt, 1.5 OHM coils with dual towers (MFG #DC-2) 

09422 12-volt, 3.0 OHM coils with single towers (MFG #DC-3) 

09423 12-volt, 3.0 OHM coils with dual towers (MFG #DC-1) 

09417 12-volt, 5.0 OHM coils with dual towers (MFG #DC8-1) 

09418 12-volt, 5.0 OHM coils with single towers (MFG #DC10-1) 


Spyke High-Output 

Single Fire Coils 

Spyke’s 80,000 volt, 3 ohm, high 

amperage coils could be just what 

you’re looking for to power up 

your single fire ignition. These 

coils have an extremely quick 

rise/fall time which equate to a 

much hotter spark. They also fire 

at extremely low voltage to aid in 

firing your bike when the battery 

is low. Will mount in stock location 

using the stock cover. . . . . . .$144.99 


text 

changed 

Dynatek Miniature Coils 

Advanced magnetic core technology delivers 

high-output in one of the smallest packages 

available. Great for custom bikes where coils 

need to be hidden. Available individually or in 

sets of two as single output or dual output 3 or 

.5 ohm coils. Not for use with Dyna S, Dyna III or 

earlier generation ignitions. 

• Overall dimensions: 4.2" x 2.3" x 1.6" 

• Mounting centers: 2.9" min, 3.5" max 

• Approximate weight: 9.8 oz. each 

3 Ohm Coils 

For use with Evolution ® Original Equipment or 

aftermarket ignitions. 

Dual Output Coils 

668880 Sold in pairs (MFG #DC1-3) . . . . . .$184.00 

668881 Sold each (MFG #DC1-2) . . . . . . . .$101.00 

Single Output Coils 

668882 Sold in pairs (MFG #DC3-3) . . . . . .$184.00 

668883 Sold each (MFG #DC3-2) . . . . . . . .$101.00 

1/2 Ohm Coils 

These .5 ohm coils are for use with Twin Cam 88 ® 

Original Equipment or aftermarket ignitions. 

Dual Output Coils 

668884 Sold in pairs (MFG #DC11-2) . . . . .$184.00 

668885 Sold each (MFG #DC11-1) . . . . . . .$101.00 

Single Output Coils 

668886 Sold in pairs (MFG #DC12-2) . . . . .$184.00 

668887 Sold each (MFG #DC12-1) . . . . . . .$101.00

RevTech ® High Performance 

12-Volt Coils 

RevTech ® high-performance coils 

from Custom Chrome ® feature 

spark voltages of 40,000 volts. 

That’s right – 40,000 volts which 

makes these the highest output 

stock-style coils on the market. 

They’re made in the U.S.A. and 

available in two versions to fit 

most Big Twin and Sportster ® models 

from 1965 thru 2003. . . . .$59.99 

59713 Fits Big Twin models from 

1984 thru 1999 and 

Sportster ® models from 

1985 thru 2003 with V-Fire 

III electronic ignitions (2.8 

ohm primary resistance) 

59714 Fits all 12-volt models 

with point-triggered or 

Prestolite electronic ignitions 


(4.5 ohm primary resistance) 

Accel ® Power Pulse Coil 

Accel performance coil with a 

unique design that provides longer 

spark duration with a greater KV 

rating and faster rise time than the 

stock coil. Molded in bright yellow 

epoxy, it is guaranteed to improve 

starting, mid-range response and 

top-end performance. . . . . . .$84.76 

25507 Fits 12-volt models with 

point-triggered or 

Prestolite electronic ignitions 


(4.2 ohm primary 

resistance) 

Premium ® 12-Volt Coils 

Quality replacement coils for 12-volt applications. 

Engineered to the exact specifications and design 

as the Original Equipment parts they replace. 

They’re available for 1965 thru 1979 models or 

1980 thru 1984 models equipped with V-Fire II or 

V-Fire III electronic ignitions. . . . . . . . . . . . . .$42.99 

Note: These two coils are not interchangeable. Installation of 

the 1980 thru 1984 coil on earlier models, or the installation 

of the 1965 thru 1979 coil on later models, may shorten point 

life or damage other electronic components on the vehicle. 

17130 Fits 12-volt models from 1965 thru 1979 

with points or Prestolite electronic 

ignitions (repl. OEM 31609-65A) 

17131 Fits all Shovelhead models from 1980 

thru 1984 and Sportster ® models from 

1980 thru 1982 with V-Fire II electronic 

ignition, as well as Sportster ® models 

from 1983 thru 1984 with V-Fire III ignitions 

(repl. OEM 31609-80) 

Accel ® Super Coils 

These American-made coils produce 

up to 67% more voltage than 

stock coils. They also have a faster 

rise time and longer spark duration 

which provide quicker starting, 

an improved idle and crisper 

throttle response. Other features 

include a finned top which acts as 

a voltage dam to prevent arcing, 

carbon-tracking and “flashover”, 

as well as improved configurations 

to permit simple bolt-on installations. 

25410 Fits all 12-volt models with 

point-triggered or 

Prestolite ignitions from 

1965 thru 1979 

(4.7 ohm primary 

resistance) . . . . . . . . .$91.89 

25411 Fits all models with electronic 

ignitions (except 

Twin Cam 88 ® engines and 

fuel injected Evolution ® 

engines) from 1980 thru 

2003 (2.3 ohm primary 

resistance) . . . . . . . . .$99.73 

Note: These coils may not be used in conjunction 

with CC #’s 15205 or 15206 coil covers 

due to interference problems. 


Coils 

RevTech ® High-Performance Ignition Coils 

These coils produce up to 30,000 volts of spark energy to 

insure a clean fuel burn and maximize ignition efficiency in all 

two- and four-plug ignition systems. They may be installed 

with the custom billet aluminum brackets and covers contained 

elsewhere in this section. The 6-volt coils may be wired 

in series for single point or electronic ignitions. The 12-volt 

coils were designed mostly for dual point or dual electronic 

pick-up ignitions more commonly referred to as ‘single fire’ 

systems. Sold in pairs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$114.99 

Single Fire, Dual Plug Heads 

59720 12-volt, 3.0 ohm coils with dual towers 

Single Fire, Single Plug Heads 

59721 12-volt, 3.0 ohm coils with single towers 

Dual Fire, Dual Plug Heads (wired in series) 

59722 6-volt, 1.5 ohm coils with dual towers 

Accel ® Single Fire 

‘Super Coil’ 

This ‘Super Coil’ is just as powerful 

as the original. Makes for a perfect 

replacement or upgrade and will 

bolt right on with no modifications 

to your bracket. Fits all 

Big Twin and Sportster ® models 

(except Twin Cam 88 ® models or 

fuel injected models) with aftermarket 

single fire ignitions from 

1965 to present. . . . . . . . . . . .$138.65 

668002 3 ohm 

RevTech ® Mini Coils 

High-output, 80,000 volt coils in a 

compact size. Works with 3 ohm 

electronic ignitions on most Big 

Twin models from 1980 thru 1999 

and Sportster ® models from 1980 

thru 2003. Avail-able in single or 

dual fire versions that fit under 

Original Equipment coil covers. 

28714 Dual fire . . . . . . . . . . .$69.99 

28673 Single fire . . . . . . . . .$123.00 

6.13 

Apparel 

Bike Kits 

& Trailers 

Seats 

& Bags 

Foot 

Controls 

Hand 

Controls 

Lighting 


Exhaust 

Intake 

Engine 

Gaskets 

Tranny 

& Clutch 

Driveline 

Wheels, 

Tires 

& Brakes 

Frames 

Forks 

& Shocks 

Sheetmetal 

General 

Cross 

Reference


6 

Coils 

Dyna ‘Twin Fire’ 

High-Output Coils 

The perfect complement to digital electronic 

ignition systems. Each unit packs two individual 

40,000 volt coils into one high-performance single 

fire unit, for FXR, Dyna Glide and Softail ® 

models in stock locations using stock brackets 

and covers. 

• No exposed lamination to rust and degrade 

performance 

• Terminals machined from solid brass 

• High impact thermoplastic housings are ultrasonically 

welded and sealed against moisture 

• 3-Ohm resistance with peak gap current 

in excess of 500ma 

• Accepts 7 to 8mm sparkplug wires 

• Made in the USA. 

For Single Spark Plug Heads 

Easily fits under the gas tanks of Sportster ® 

and ‘Dresser’ models. . . . . . . . . . . . . . . . . . . .$195.00 

09100 Two output towers (MFG #DC6-5) 

For Dual Spark Plug Heads 

Slightly larger than a stock coil and features 

high and low mount output towers. . . . .$190.00 

09413 Four output towers (MFG #DC6-4) 

Note: These single fire coils were designed to be used 

with digital electronic ignitions with dwell control such 

as the Dyna 2000 Digital. 

6.14 

09100 

09413 

Chrome or Black Ignition Coils 

Performance coils have high-impact plastic cases 

come in your choice of chrome or black finishes 

to fit 12-volt ignition systems fitted to Big Twin 


40,000 volt high-performance coil for Big Twin 

models from 1983 thru 1999 and Sportster ® models 

from 1983 thru 2003 (repl. OEMs 31653-97, 

31654-97 and 31620-88A) . . . . . . . . . . . . . . . .$57.99 

24891 Chrome 

24890 Black 

Fit Big Twin models from 1984 thru 1999 

and Sportster ® models from 1985 thru 2003 

with V-Fire III electronic ignitions 

(repl. OEM 31614-83) . . . . . . . . . . . . . . . . . . .$57.99 

24893 Chrome 

24892 Black 

Fits 12-volt Big Twin and Sportster ® models with 

points or Prestolite electronic ignitions from 1965 

thru 1979 (repl. OEM 31609-65A) . . . . . . . . .$57.99 

24897 Chrome 

24896 Black 

Stock Replacement Coils 

by Powerband 

While these American-made coils all share the 

same physical configuration as the current 

production late-model electronic ignition coil, 

they all feature the exact same electrical 

specifications of their respective Original 

Equipment counterparts. . . . . . . . . . . . . . . . .$50.49 

Note: These coils are not interchangeable. Misapplication 

may shorten point life or damage other components. 

Fits all 12-volt Sportster ® or Big Twin models 

from 1965 thru 1979 with points or Prestolite 

electronic ignitions. 

25412 Replaces OEM 31609-65A 

Fits all Shovelhead models from 1980 thru 1984 

and Sportster ® models from 1980 thru 1982 with 

V-Fire II electronic ignition, as well as Sportster ® 

models from 1983 thru 1984 with V-Fire III ignitions. 

25413 Replaces OEM 31609-80 

Fits Big Twin models from 1984 thru 1999 and 

Sportster ® models from 1985 thru 2003 with 

V-Fire III ignitions. 

25414 Replaces OEM 31614-83 


Chrome-Plated Original-Style Coils 

Original-style square coils complete with copper 

core wires, connectors and bracket. Available to 

fit many models from 1948-early 1982. They’re 

not compatible with electronic ignitions on 1980 

and later models. Sold each. . . . . . . . . . . . . .$54.79 

17132 12-volt 

17133 6-volt (repl. OEMs 31604-48, 31722-48A) 

Thunderbolt Coil 

The internal windings are 100% immersed in an 

oil-filled jacket. The oil insulation cannot 

become brittle with age or crack from heat like 

conventional jelly materials. Includes wire-core 

‘yellow jacket’ spark plug leads with black 90° 

plug boots, a chromed coil bracket, hardware 

and a “THUNDERBOLT” sticker. . . . . . . . . . .$39.49 

25588 12-volt coil with 5.0 ohms of resistance 

for use with point-type ignition systems

Billet ‘Engine Turned’ Coil Cover Kit 

by Custom Cycle Engineering 

Get a high-tech machined look. Mounts DC-type Dyna coils 

between the cylinders. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$199.00 

60163 Fits most Big Twin models 

030976 

with 

030084 

030978 030979 

Donnie Smith “V” Series Coil Bracket Kits 

This addition to our Donnie Smith Signature Series is right 

in line with the highest standards in production and finish. 

CNC machined from aluminum, each piece is polished to a 

high luster, then triple show chrome plated. Unique features 

of this kit include a hidden set screw to lock in the smaller 

toggle switch, automotive style ignition switch (off/on/start) 

and a three position toggle light switch (high/off/low). Fit 

all Big Twins with coil mount top motor mounts. 

Bracket with Switches 

030976 Triple V kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$115.99 

030977 Power V kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$118.49 

Coil Covers 

These smooth coil covers by Donnie Smith, were designed to 

compliment any bike style from stock to ultra custom. Made 

of tough ABS plastic, they are scratch resistance and ready to 

be painted to match any paint scheme. Fits all Big Twins with 

Dynatech coils and coil mount top motor mounts. 

030084 Coil covers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$49.99 


030978 Triple V bracket without switches . . . . . . . . . . . . .$80.89 

030979 Power V bracket without switches . . . . . . . . . . . .$80.89 

370332 Ignition switch (off/on/start) . . . . . . . . . . . . . . . . . .$28.99 

Coil Brackets and Covers 

Billet Coil Bracket 

by Dave Perewitz 

Chrome-plated or polished billet aluminum 

bracket combines the coil 

mount, ignition switch and starter 

button into one unit. Designed to 

mount between the motor’s cylinders, it will 

accept RevTech ® or Dyna coils and any of the 

ignition switches fitted to FXR and Sportster ® 

models, as well as a custom starter button (coils sold 

separately). 

42899 Chrome coil bracket with starter and ignition switches . . . . . . . . . . . . . . . . . . . .$162.99 

42910 Polished coil bracket ONLY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$98.99 

42911 Custom starter button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$12.49 

12286 Ignition switch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$26.79 

09415 

Doss Chrome Dual Coil Mounting Kits 

These kits provide a stylish solution for mounting your coils when updating your bike to 

higher performance ignition, as well as adding an attractive custom look. They’re 

designed to accept two RevTech ® or ‘Dyna’ single or dual tower coils. The covers are 

CNC-machined from billet aluminum and are highly polished before being triple chromeplated 

for lasting show-quality brilliance. Both kits include chrome-plated sockethead 

hardware and mounting brackets, and the kit for Softail ® models includes a heavy-duty 

chrome top motor mount. 

09410 Fits all Evolution ® -powered FXR models from 1984 thru 2000 . . . . . . . . . . . . . .$149.99 

09415 Fits all Softail ® models from 1984 thru 1999 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$223.19 

Note: Requires horn relocation. 

09410 

Coils 

59720 RevTech ® 12-volt, 3.0 ohm coils with dual towers (sold in pairs) . . . . . . . . . . . . .$114.99 

59721 RevTech ® 12-volt, 3.0 ohm coils with single towers (sold in pairs) . . . . . . . . . . .$114.99 

59722 RevTech ® 6-volt, 1.5 ohm coils with dual towers (sold in pairs) . . . . . . . . . . . . . .$114.99 

09423 Dyna 12-volt, 3.0 ohm coils with dual towers (sold in pairs) . . . . . . . . . . . . . . . .$155.00 

09422 Dyna 12-volt, 3.0 ohm coils with single towers (sold in pairs) . . . . . . . . . . . . . . .$155.00 

09417 Dyna 12-volt, 5.0 ohm coils with dual towers (sold in pairs) . . . . . . . . . . . . . . . .$155.00 

09418 Dyna 12-volt, 5.0 ohm coils with single towers (sold in pairs) . . . . . . . . . . . . . . .$155.00 

09421 Dyna 6-volt, 1.5 ohm coils with dual towers (sold in pairs) . . . . . . . . . . . . . . . . . .$155.00 


6.15 

Apparel 

Bike Kits 

& Trailers 

Seats 

& Bags 

Foot 

Controls 

Hand 

Controls 

Lighting 


Exhaust 

Intake 

Engine 

Gaskets 

Tranny 

& Clutch 

Driveline 

Wheels, 

Tires 

& Brakes 

Frames 

Forks 

& Shocks 

Sheetmetal 

General 

Cross 

Reference


6 


43328 

Polished Billet Aluminum Coil Mount System 

by Yankee Engineuity 

A great way to integrate between the cylinder coil mounting, a heavy-duty 

motor mount and a custom keyswitch. 

Polished Billet Aluminum Coil Brackets 

Crafted by Yankee Engineuity to use Yankee’s dual coil cover with Crane, 

Dynatek , Powerband and Spyke ® coils. The brackets bolt directly to Yankee 

heavy-duty billet motor mounts. 

09375 Fits Dyna ‘Twin Fire’ coils . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$96.56 

09376 Fits Crane Single Fire, Powerband and Spyke coils . . . . . . . . . . .$96.56 

6.16 

86279 

86270 

08958 

43326 

Billet Aluminum Motor Mounts 

by MW 

These stylish German-made motor mounts are 

CNC-machined and then given a highly-polished 

finish and furnished with stainless steel mounting 

hardware. They’re the ideal companions to the 

MW coil bracket systems which can be seen in 

Section 6 of this catalog, and are available in 

Standard and Super Light versions which feature 

stylish weight saving cut-outs. If desired, Original 

Equipment-style ignition switches can be installed 

in place of the coil brackets on these motor 

mounts thru the additional purchase of a 

CC #86289 Switch Mounting Bracket. 

Fit Dyna Glide Models from 1991 thru 

1998 and FXR Models from 1984 thru 1999 

86270 Standard . . . . . . . . . . . . . . . . . . . . . . .$282.89 

86279 Super Light . . . . . . . . . . . . . . . . . . . .$303.79 

09475 

86278 

86289 

Fit Dyna Glide Models from 1999-up 

(except EFI models) 

86271 Standard . . . . . . . . . . . . . . . . . . . . . . .$291.69 

86275 Super Light . . . . . . . . . . . . . . . . . . . .$265.59 

Fit Dyna Glide Models from 1999-up 

with EFI 

686212 Standard . . . . . . . . . . . . . . . . . . . . . . .$291.19 

686213 Super Light . . . . . . . . . . . . . . . . . . . .$308.99 

Fit Softail ® Models from 1984 thru 1999 

86273 Standard . . . . . . . . . . . . . . . . . . . . . . .$325.79 

86278 Super Light . . . . . . . . . . . . . . . . . . . .$346.69 

Fit Softail ® Models from 2000-up 

(except EFI models) 

86274 Standard . . . . . . . . . . . . . . . . . . . . . . .$343.19 

86277 Super Light . . . . . . . . . . . . . . . . . . . .$338.79 

Fit Softail ® Models from 2000-up with EFI 

686214 Standard . . . . . . . . . . . . . . . . . . . . . . .$341.59 

686215 Super Light . . . . . . . . . . . . . . . . . . . .$281.59 


Coil Covers 

43326 Chrome coil cover for dual Nology coils, single Dyna ‘Twin Fire’ coil, 

Crane single fire coil and Powerband coils . . . . . . . . . . . . . . . . . .$133.39 

43328 Chrome coil cover for dual Dyna coils . . . . . . . . . . . . . . . . . . . . . .$138.12 

Heavy-Duty Billet Aluminum Motor Mounts 

Highly-polished American-made top motor mounts are CNC-machined from 

solid billet for strength and beauty. Available in versions that take optional 

FXR-style coils or dual coil mount brackets for Dyna, RevTech ® or Nology coils. 

09475 Fits Softail ® models from 1986 thru 1999 . . . . . . . . . . . . . . . . . . .$175.25 

09476 Fits Dyna Glide models from 1991 thru 1998 . . . . . . . . . . . . . . . .$163.92 

09335 Fits Evolution ® Sportster ® models from 1986 thru 2003 

(holes for coils, horn, stock choke knob and key switch) . . . . .$188.23 

09472 Fits FXR models from 1986 thru 1994 . . . . . . . . . . . . . . . . . . . . . . .$170.93 

09474 Fits Panhead and Shovelhead models from 1948 

thru 1984 with coil mount holes . . . . . . . . . . . . . . . . . . . . . . . . . . .$179.79 

Polished Keyswitch Holder and Switches 

08958 Polished billet aluminum keyswitch holder . . . . . . . . . . . . . . . . . .$94.25 

12203 Water resistant flat key switch with spring-return start . . . . . . . .$49.99 

12286 OEM-style flat key switch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$26.79 

49211 OEM-style round key switch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$32.84 

Adapter Brackets 

09478 Polished billet aluminum coil bracket adaptor for CC #09-475 . . .$40.94 

86274 

86273 

86272 

86276 

Fit Sportster ® Models from 

1986 thru 2003 

86272 Standard . . . . . . . . . . . . . . . . . . . . . . .$325.79 

86276 Super Light . . . . . . . . . . . . . . . . . . . .$348.89 

86288 Spacer to provide necessary clearance 

between the engine and the coil or 

accessory ignition switch brackets 

when installed . . . . . . . . . . . . . . . . . .$32.09 

Ignition Switch Mounting Bracket 

Used to install an ignition switch between 

the cylinders when your coils are mounted 

elsewhere. Accepts most Original Equipment 

and aftermarket ignition switches. 

86289 Fits all MW billet 

motor mounts . . . . . . . . . . . . . . . . . .$246.19


86282 86281 

86280 

86283 86284 

86290 

686209 686211 686210 86287 

86286 86288 

Billet Aluminum Coil Brackets 

and Mounts by MW 

These stylish German-made billet coil brackets are 

CNC-machined and then given a highly-polished 

finish and furnished with stainless steel mounting 

hardware. They may be combined with one of 

the billet aluminum top motor mounts made by 

MW, or a lower cost alternative is to combine 

them with a CC #86290 adapter which permits 

them to be installed on any of the two-piece 

Original Equipment motor mounts used from 

1991 to present. If desired, Original Equipmentstyle 

ignition switches can be installed on some 

of the coil mounts. 

Coil Mount and Cover Kits with Motor Mount 

by Dave Perewitz 

Uniquely shaped coil covers mount to an innovative bracket to form a 

mounting solution for coils on the included motor mount. The bracket 

is available smooth or with a keyed ignition switch and starter button 

(shown), and accepts two post-style Dynatek or RevTech ® coils in single 

or dual-tower designs. The chrome-plated steel motor mount is a universal 

design that works on both solid and rubber-mount Evolution ® 

Big Twin engines from 1984 thru 1999. Includes instructions (coils sold 

separately). 

42921 Without switch and starter button for single tower coils . . . . .$225.99 

42923 With ignition switch and starter button for single tower coils . .$224.99 

42924 With ignition switch and starter button for dual tower coils .$224.99 

Billet Aluminum Coil Brackets 

and Mounts by MW 

For RevTech ® and Dyna Coils 

86280 V-style bracket with triangle 

cut-out . . . . . . . . . . . . . . . . . . . . . . . . .$151.89 

86281 V-style bracket with slots . . . . . . . .$145.29 

86282 V-style bracket with hole 

for ignition switch . . . . . . . . . . . . . . .$151.89 

86283 Design line V-style bracket 

with triangle cut-out . . . . . . . . . . . .$166.19 


with slots . . . . . . . . . . . . . . . . . . . . . . .$173.89 


with hole for ignition switch . . . . .$176.09 

For Crane Single-Fire Compact Coil 

Uses CC #24-518 ignition coil. 

86286 Coil housing . . . . . . . . . . . . . . . . . . . .$349.99 

86287 Coil housing with hole 

for ignition switch . . . . . . . . . . . . . . .$354.39 


For OEM Twin Cam 88 ® Coils (except 

Touring models and 2001- up EFI models) 

686157 Coil housing 

686156 Coil housing with hole 

for ignition switch 

For OEM Twin Cam 88 ® Coils with EFI 

686209 Coil bracket standard 

686210 Coil bracket cutout 

686211 Coil bracket cutout 

Top Motor Mount Adapter 

Adapts MW coil brackets to all two-piece 

Original Equipment upper motor mounts 

on Evolution ® Big Twins from 1991 thru 1999. 

86290 Motor mount adapter . . . . . . . . . . . .$61.19 

86288 Spacer to provide necessary clearance 

between the engine and the coil or 

accessory ignition switch brackets 

when installed . . . . . . . . . . . . . . . . . . .$32.09 

Ignition Switch Mounting Bracket 

Used to install an ignition switch between the 

cylinders when your coils are mounted elsewhere. 

Accepts most Original Equipment and aftermarket 

ignition switches. 

86289 Fits all MW billet motor 

mounts . . . . . . . . . . . . . . . . . . . . . . . . .$246.19 

F. Kodlin Seat Post/Coil Bracket 

for Twin Cam 88 ® Softail ® Models 

Looking for pure innovation? This beautiful billet aluminum seat post 

features an integrated coil mounting bracket with ball milled detail. It’s 

CNC-machined and polished before being chrome-plated. 

86560 Fits all Softail ® models from 2000 to present . . . . . . . . . . . . . . . .$474.29 

6.17 

Apparel 

Bike Kits 

& Trailers 

Seats 

& Bags 

Foot 

Controls 

Hand 

Controls 

Lighting 


Exhaust 

Intake 

Engine 

Gaskets 

Tranny 

& Clutch 

Driveline 

Wheels, 

Tires 

& Brakes 

Frames 

Forks 

& Shocks 

Sheetmetal 

General 

Cross 

Reference


6 

Coil Covers 

Finned Coil Cover 

Cool styling also helps keep your coil cool with 

our exclusive, die-cast coil cover. It’s a bolt-on fit 

on FXR models with stock-style coils, and may 

also be fitted to all Softail ® models thru 1999 

when combined with CC #13068 heavy-duty 

motor mount or other motor mount tapped for 

standard coil mounting. 

09408 Coil cover for FXR models . . . . . . . .$46.99 

13068 Heavy-duty motor mount 

for Softail ® models . . . . . . . . . . . . . . .$55.59 

Note: On Softail® applications, the horn must be relocated. 

Chrome Antique-Style Coil 

Covers 

Designed after the popular covers used in the 

mid-1940s. The two openings in the front permit 

easy access to the plug wires, and the inside of 

the covers features a heavy-duty 

mounting bracket. . . . . . . . . . . . . . . . . . . . . . . .$34.09 

15206 Fits all Softail ® models from 1984 thru 

1999 

15205 Fits 4-speed Big Twins from 1965 thru 

1986 (except Softail ® models) 

Note: These coil covers may not be used in conjunction with 

CC #’s 25410 or 25411 due to interference problems. 

Stainless Coil Covers 

for Sportster ® Models 

A pair of stainless steel end caps to customize the 

late-style coil on Sportster ® models from 1985 

thru 2003. Also fits the late-style coil on Big Twin 

models from 1984 thru 2003. These parts are held 

on with double-sided tape. . . . . . . . . . . . . . . . .$11.64 

15208 Sold in pairs 

6.18 

Chrome Coil Covers 

by Thunder Cycle Design 

One of a kind styled coil covers designed to fit 

FXR-style top motor mounts. Made of billet aluminum 

with two styles and sizes to choose from. 

One size covers dual fire mini ignition coils from 

Crane ® and RevTech ® (CC #28714). The other size 

covers single fire coils from Crane ® and Dynatek 

(CC #09100). The logo design features a clean 

engraved Thunder Cycle logo on the coil cover. 

The stepped design consists of a stepped pattern 

around the outside of the coil cover. 

Fits Dual Fire Mini Ignition Coils 

644028 Logo coil cover . . . . . . . . . . . . . . . . .$199.95 

644030 Stepped coil cover . . . . . . . . . . . . . .$199.95 

Fits Single Fire Ignition Coils 

644029 Logo coil cover . . . . . . . . . . . . . . . . .$199.95 

644031 Stepped coil cover . . . . . . . . . . . . . .$199.95 

Bob McKay Coil Cover 

Designed by noted Canadian customizer, Bob 

McKay. Installs over the original coil mounting 

bracket. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$35.99 

11999 Fits all Softail ® models from 1984 thru 1999 


Chrome Coil Covers 

A variety of styles to add the perfect custom 

touch to your machine. 

Fits 4-speed Big Twin and Softail ® models from 

1965 thru 1999. 

26511 24K gold wing emblem . . . . . . . . . .$20.14 

26378 Louvered (repl. OEM 31610-83T) .$20.34 

15210 Plain (repl. OEM 31606-65TA) 

not shown . . . . . . . . . . . . . . . . . . . . . . .$20.99 

Chrome Coil Cover 


Show-chrome two-piece coil cover. Beautifully 

constructed from stamped steel for a perfect fit 

on Original Equipment or aftermarket coils from 

1971 thru 1981. . . . . . . . . . . . . . . . . . . . . . . . . .$21.84 

25024 Replaces OEM 31611-83T 

Coil Cover for Dyna Glide Models 

Chrome steel cover fits all Dyna Glide models 

from 1999 to present. Sold each. . . . . . . . . . .$24.49 

09879 Replaces OEM 31644-99 

Coil Cover for FXR Models 

A beautiful chrome-plated coil cover for all FXR 

models from 1982 thru 1994. . . . . . . . . . . .$27.79 

15207 Replaces OEM 31625-82T

59819 

59842 

59834 

59823 

RevTech ® Pro-Spark High-Performance Plug Wire Sets 

The best ignition system and coils in the world won’t help fire plugs with ineffective plug 

wires. That’s why Custom Chrome ® developed RevTech ® Pro-Spark high-performance 

wires with nine colors and two diameters for the right look to go with the right performance. 

Color-matched plug boots are bonded directly to the wire in 90° and 180° styles in 

pre-cut or universal kits. Universal kits include two 26"-long spark plug wires with a 180° 

boot bonded to one end and a 90° boot bonded to the other. Choose proper boot style, 

cut the wires to length, and attach the coil boots to the cut ends. 

‘Pro-8’ Wire Sets 

Spiro-Wound resistor wires are made with highly-conductive materials – the core is 

thermally-cured and has two conductors that act as a mini-circuit of resistance in parallel. 

The result is a wire that has 1/10th the resistance of normal resistor-core plug wires, 

yet provides protection from interference that can play havoc with stereos, CB radios or 

sophisticated electronic ignitions. It is appropriate for point or electronic ignitions in racing 

or street applications. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$16.29 to $25.99 

‘Racing-Pro 10.4’ Wire Sets 

10.4mm-diameter wires provide the ultimate in efficient electrical transmission for 

the highest-performing ignition systems. They’re made with three separate layers of 

silicone layered with tightly-woven, heat-treated fiberglass for the ultimate in strength 

and insulation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$38.39 to $49.59 


Spark Plug Wires 

RevTech ® Pro-Spark Braided Stainless 

Steel Spark Plug Wire Sets 

8mm-diameter plug wires use the same Spiro-Wound conductor 

featured in our ‘Pro 8’ line of wires with a resistor wire 

that has 1/10th of the resistance of normal resistor-core plug 

wires, yet still minimizes the interference that can play havoc 

with stereos, CB radios or sophisticated electronic ignitions. 

Fits all 4-speed FL and FX models from late 1978 thru 1986, 

Softail ® models from 1984 thru 1999, Dyna Glide models 

from 1991 thru 1998, and Sportster ® models from late 1978 

thru 1985. 

59843 Complete kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$29.69 

Fits all FXR models from 1982 thru 2000 

59844 Complete kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$29.69 

Fits all FLT, FLHT, FLHS and Road King ® models from 1980 

thru 1998, and Evolution ® Sportster ® models from 1986 

thru 2003 (except 1998 thru 2003 XL1200S models) 

59845 Complete kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$29.69 

Note: These wire sets are not designed for racing applications, and must be 

grounded with the included grounding kit. 

8mm 10.4mm 

Yellow Black Red Blue Purple Orange Lime White Blue Red 

Silicon cover with ‘Spiro-Wound’ resistor conductor 

Fit 4-speed FL and FX models from late 59808 59809 59810 59811 59833 59834 

1978 thru 1986; Sportster ® models from 

late 1978 thru 1985; Softail 

$16.29 $16.29 $16.29 $16.29 $38.39 $38.39 

® models from 

1984 thru 1999; Dyna Glide models from 

1991 thru 1998 

Fit FXR models from 1982 thru 2000 59812 59813 59814 59815 59835 59836 

$16.69 $16.69 $16.69 $16.69 $39.99 $39.99 

Fit Evolution ® Sportster ® models from 59816 59817 59818 59819 59837 59838 

1986 thru 2003 (except XL1200S); FLT, 

FLHT, FLHS and Road King 

$16.69 $16.69 $16.69 $16.69 $38.49 $38.49 

® models 


Fit Twin Cam 88 ® Softail ® models 59850 59851 59852 59853 

from 2000 to present $19.49 $19.49 $19.49 $19.49 

Fit Twin Cam 88 ® Dyna Glide models 59854 59855 59856 59857 

from 1999 to present $19.49 $19.49 $19.49 $19.49 

Fit Twin Cam 88 ® FLT, FLHT and Road King ® 59869 59870 59871 59872 

models from 2000 to present $21.39 $21.39 $21.39 $21.39 

Universal Wire Set–26"-long 59820 59821 59822 59823 59824 59825 59826 59828 59841 59842 

with 90° and 180° plug boots 

(electronic or point ignition) 

$25.99 $25.99 $25.99 $25.99 $25.99 $25.99 $25.99 $25.99 $49.59 $49.59 

6.19 

Apparel 

Bike Kits 

& Trailers 

Seats 

& Bags 

Foot 

Controls 

Hand 

Controls 

Lighting 


Exhaust 

Intake 

Engine 

Gaskets 

Tranny 

& Clutch 

Driveline 

Wheels, 

Tires 

& Brakes 

Frames 

Forks 

& Shocks 

Sheetmetal 

General 

Cross 

Reference


6 


Accel ® ‘300+’ Plug Wire Sets 

8.8mm core has 300% greater current capacity 

than most other ‘high-performance’ ignition 

wires, yet still suppresses radio frequency interference 

that electronic ignition systems demand. 

23788 Fits all Softail ® models from 1991 

thru 1999 . . . . . . . . . . . . . . . . . . . . . . .$23.56 

23826 Fits Dyna Glide models from 1999 

to present . . . . . . . . . . . . . . . . . . . . . . .$23.56 

23782 Fits Dyna Glide models from 1991 

thru 1998; Softail ® models from 

1984 thru 1990; FX models from 

1985 thru 1986; Sportster ® models 

from 1971 thru 1985 . . . . . . . . . . . . .$23.56 

23785 Fits all FXR models from 1982 

thru 2000 . . . . . . . . . . . . . . . . . . . . . . .$23.56 

23827 Fits Touring models from 1999 

to present . . . . . . . . . . . . . . . . . . . . . . .$23.56 

23789 Fits Touring models from 1991 

thru 1998 . . . . . . . . . . . . . . . . . . . . . . .$23.56 

23787 Fits Evolution ® Sportster ® models 

(except XL1200S models) from 1986 

thru 2003 . . . . . . . . . . . . . . . . . . . . . . .$23.56 

23828 Fits 4-plug Sportster ® XL1200S 

from 1998 thru 2003 . . . . . . . . . . . . .$46.43 

23783 Fits 4-speed FX models from late 1978 

thru 1984 and 4-speed FL models from 

1965 thru 1984 . . . . . . . . . . . . . . . . . .$23.56 

23826 Fits all Buell ® models from 1999 

thru 2003 . . . . . . . . . . . . . . . . . . . . . . .$23.56 

23825 Fits all Buell ® models from 1996 

thru 1998 . . . . . . . . . . . . . . . . . . . . . . .$22.38 

23790 Fits 4-plug applications with 90° boots 

(except Twin Cam 88 ® models) . . .$51.17 



23792 Universal 4-plug applications 


23793 Universal 2-plug applications 


6.20 

Accel ® 8.8mm Custom Wire Sets 

Black with black plug boots or traditional Accel 

yellow with black plug boots. Non-resistor stainless-reinforced 

high-conductivity silver-plated 

copper wire or resistor suppression core. High 

dielectric-strength silicone plug boots prevent 

arcing to cylinder heads, and brass coil terminals 

have weatherproof boots attached at the factory 

to insure perfect termination. 

Stainless/Copper Core 

Yellow Black 

25455 26872 Fit all Sportster ® models 

with magneto from 1958 

thru 1969 . . . . . . . . . . . . . .$20.29 

25511 26870 Fit all 4-speed FL and FX models 

from 1965-early 1978 . . .$20.29 

25512 26871 Fit Sportster ® models 

from 1971-early 1978 . . .$20.29 

Suppression Core 

Yellow Black 

25508 26868 Fit all 4-speed FL and FX models 

(except Softail ® models) from 

late 1978 thru 1984 . . . . .$20.29 

25509 26869 Fit Sportster ® models from 

late 1978 thru 1985, FX models 

from 1985 thru 1986; Softail ® 

models from 1984 thru 1990; 

Dyna Glide models from 1991 

thru 1998 . . . . . . . . . . . . . .$20.29 

25510 26875 Fit Evolution ® Sportster ® models 

(except XL1200S models) from 

1986 thru 2003 . . . . . . . . .$20.29 

25513 26873 Fit all FXR models from 1982 

thru 1999 . . . . . . . . . . . . . .$20.29 

25514 26874 Fit all 5-speed Touring models 

from 1980 thru 1984 . . . .$20.29 

26882 26884 Fit all Softail ® models 

from 1991 thru 1999 . . . .$20.30 

26883 26885 Fit all Touring models 

from 1991 thru 1998 . . . .$19.69 


Accel ® Armor Shield Wire Sets 

Premium suppression-core 8mm silicone wire, 

heavy-duty silicone plug boots and Armor Shield 

braid with nickel-plated ferrules that provide 

ignition system protection. Include instructions 

and grounding kit. . . . . . . . . . . . . . . . . . . . . . . .$31.48 

25465 Fits 4-speed FL and FX models from 1965 

thru 1984 (except Softail ® models) 

25459 Fits FX models from 1985 thru 1986; 

Softail ® models from 1984 thru 1999; all 

Dyna Glide models from 1991 thru 1998 

25466 Fits Sportster ® models from 1965 

thru 1985 

25467 Fits FXR models from 1982 thru 2000 

25469 Fits Sportster ® models from 1986 thru 

2003 (except 1998 thru 2003 XL1200S) 

Crane 8.5mm ‘FireWire’ 


The ultimate plug wires for all-out racing or serious 

street performance. Pure silicone, double 

jacketed, reactive core specifically engineered 

for high-output competition ignition systems! 

Unique Reactive Core goes beyond suppression 

and actually filters out radio frequency interference 

(RFI) and electromagnetic interference 

(EMI). Extremely low resistance insures maximum 

spark energy is delivered to the spark plugs. 

Large 8.5mm diameter with double silicone 

layer for protection from extreme temperatures. 



24424 Universal kit for 2-plug applications 

on Twin Cam 88 ® models . . . . . . . . .$22.99 

22228 Fits all Softail ® models from 1991 

thru 1999 . . . . . . . . . . . . . . . . . . . . . . .$20.24

Accel ® Bulk Spooled Ignition Wire 

60 foot spool of 8.8mm plug wire now available in bulk. Now you can build 

your own plug wires to your custom length. Choose from yellow RFI suppression 

core for low noise or black 300+ race wire for performance. 

668011 Yellow . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$149.00 

668012 Black . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$174.54 

Accel ® Boot and Terminals for Spark Plug Wires 

For use with 8.8mm plug wire. Each pack contains 10 each of boots 

and terminals. 

668007 90 degree boot with terminals for spark plug end . . . . . . . . . . . .$35.63 

668008 Adjustable boot with terminals for spark plug end 

(flexible boot that will hold its position) . . . . . . . . . . . . . . . . . . . . .$47.19 

668009 Straight angle boot with terminals for ignition coil end . . . . . .$35.63 

668010 90 degree boot with terminals for ignition coil end . . . . . . . . . . .$38.65 

‘Sterling Chromite II ’ 

Ignition Wires by Magnum 

High-temperature silicon wires and boots with 

Sterling Chromite wire braid are designed to 

match the brilliance of chrome. Each strand of 

wire is coated with high-temperature plastic 

before braiding for easy cleaning and to prevent 

scratches. Made in the USA. . . . . . . . . . . . . .$50.44 

45179 Fits all Twin Cam 88 ® Softail ® models 

from 2000 to present 

45178 Fits all Twin Cam 88 ® Dyna Glide 

models from 1999 to present 

45177 Fits all Twin Cam 88 ® FLT, FLHT and Road 

King ® models from 1999 to present 

45160 Fits all Evolution ® Softail ® and Dyna 

Glide models from 1984 thru 1999, 

and 1965-up 4-speed Big Twins 


45162 Fits all Evolution ® Sportster ® models 

from 1986 thru 2003 (except XL1200s) 

45161 Fits all Sportster ® models without 

magneto from 1965 thru 1985 

Nology HotWires HotWires work like an amplifier and are the only wires that 

increase horsepower. Energy from the coil accumulates in a 

capacitor in each wire, and then discharges all at once creating 

a spark 300 times more powerful than a conventional 

ignition system. Sold in sets. 

Universal Wire Sets 

Red Black 

23705 23706 23"-long with 90° boots . . . . . . . . . . . . .$81.25 

23707 23708 23"-long with straight boots . . . . . . . . .$81.25 

23709 23710 30"-long with 90° boots . . . . . . . . . . . . .$85.59 

23711 23712 30"-long with straight boots . . . . . . . . .$85.59 

Model Specific Wire Sets 


Accel ® Thundersport 5mm Ignition Wire Kits 

Half the diameter of stock wire and extremely flexible. Easy to run through 

cylinder heads, rocker covers, and frame tubes for a totally hidden look. 150 

ohms per foot Ferro-Spiral wound alloy conductor delivers super performance. 

The high gloss 5mm silicone jacket is rated for over 550 degree F and 60KV. 

They are available in four different colors, and packed with two 5 foot leads 

with 90 degree spark plug ends crimped on. Just run the wire, cut off excess, 

and follow the easy instructions to terminate the straight coil boots. 

668003 Black . . . . . . . . . . . . . .$52.56 

668004 Yellow . . . . . . . . . . . .$52.56 

Red Black 

23742 23743 Fit Softail ® and Dyna Glide models 

with rear-mounted coils from 1999 

to present . . . . . . . . . . . . . . . . . . . . . . . . . . .$83.69 

23724 23725 Fit Softail ® and Dyna Glide models 

from 1984 thru 1998 . . . . . . . . . . . . . . . . .$81.25 

23720 23721 Fit FXR models from 1982 thru 2000 . .$81.25 

23716 23717 Fit Sportster ® models from 1979 

thru 2003 . . . . . . . . . . . . . . . . . . . . . . . . . . .$81.25 


668005 Red . . . . . . . . . . . . . . .$52.56 

668006 Blue . . . . . . . . . . . . . . .$52.56 

Universal Black 


by Compu-Fire ® 

For use with all custom applications 

utilizing single or dual plug 

heads and any coil combination. 

23232 8mm spiral wound plug 

wire set for four-plug 

applications . . . . . . . .$29.98 

Spark Plug Wire 

Separators 

Machined from billet aluminum 

and available in brilliant chrome or 

a red, blue or black anodized finish 

with stylish accent grooves. 

Sold each. 

78412 Chrome . . . . . . . . . . . . .$7.99 

78413 Red . . . . . . . . . . . . . . . . .$7.99 

78414 Blue . . . . . . . . . . . . . . . .$7.99 

78415 Black . . . . . . . . . . . . . . . .$7.99 

6.21 

Apparel 

Bike Kits 

& Trailers 

Seats 

& Bags 

Foot 

Controls 

Hand 

Controls 

Lighting 


Exhaust 

Intake 

Engine 

Gaskets 

Tranny 

& Clutch 

Driveline 

Wheels, 

Tires 

& Brakes 

Frames 

Forks 

& Shocks 

Sheetmetal 

General 

Cross 

Reference


6 

Spark Plugs 

Premium Spark Plugs 

6.22 

Accel ® ‘CycleLite ’ 

Platinum Spark Plugs 

Platinum-tipped high-performance 

plugs will maintain a precise gap 

longer for more consistent ignition 

performance and better mileage. 

Side electrode is from high-chromium/nickel 

alloy for better spark at 

any voltage level. 

‘Finewire’ Platinum 

Spark Plugs by Autolite 

Better fuel burn from the exclusive 

finewire platinum electrode. 

Platinum tip resists high combustion 

temperatures, delivers precise 

firing, quicker acceleration and 

longer life. 

Size Model OEM Qty Accel # Part # Qty Autolite # Part # Qty SplitFire # Part # 

1450cc All Twin Cam 88 ® 1999-up 6R12 2 Y2418P 22023 . . .$15.38 2 MP4164 22161 . . .$15.29 1 SF416D† 031230 . . .$4.04 

1340cc All Evolution ® 1984-up 5R6A 2 Y2410P 22024 . . .$15.38 2 MP4265 22163 . . .$13.59 1 SF426E* 031234 . . .$4.04 

1340cc All Shovelheads 1982-84 5RL 2 Y2417P 22027 . . .$15.38 

1340cc All Shovelheads 1980-81 5R6A 2 Y2410P 22024 . . .$15.38 2 MP4265 22163 . . .$13.59 1 SF426E* 031234 . . .$4.04 

1340cc All Shovelheads L1978-79 5A6A 2 Y2403P 22022 . . .$15.38 2 MP4265 22163 . . .$13.59 1 SF426E* 031234 . . .$4.04 

1200cc All Evolution ® 1986-03; 6R12 2 Y2418P 22023 . . .$15.38 2 MP4164 22161 . . .$15.29 1 SF416D† 031230 . . .$4.04 

Buell ® models 1988-03 

1200cc All Shovelheads L1978-80 5R6A 2 Y2410P 22024 . . .$15.38 2 MP4265 22163 . . .$13.59 1 SF426E* 031234 . . .$4.04 

1200cc All Shovelheads 1975-E78 5A6A 2 Y2403P 22022 . . .$15.38 2 MP4265 22163 . . .$13.59 1 SF426E* 031234 . . .$4.04 

1200cc All Big Twins 1948-74 3-4 2 Y2401P 22020 . . .$15.38 2 MP4275 22164 . . .$14.29 1 SF8E 031233 . . .$6.49 

1130cc All V-Rod ® models 2002-up 10R12A 1 SF416B 031231 . . .$6.49 

1100cc All Evolution ® 1986-87 6R12 2 Y2418P 22023 . . .$15.38 2 MP4164 22161 . . .$15.29 1 SF416D† 031230 . . .$4.04 

1000cc All Sportster ® 1979-85 4R5 2 Y2413P 22026 . . .$15.38 1 SF412C 031232 . . .$4.04 

1000cc XR-1000 1983-85 6R7 2 Y2412P 22025 . . .$15.38 1 SF426C 031235 . . .$4.04 

1000cc All Sportster ® 1972-78 4 2 Y2402P 22021 . . .$15.38 1 SF412C 031232 . . .$4.04 

900cc All Sportster ® 1957-71 4 2 Y2402P 22021 . . .$15.38 

883cc All Evolution ® 1986-03 6R12 2 Y2418P 22023 . . .$15.38 2 MP4164 22161 . . .$15.29 1 SF416D† 031230 . . .$4.04 

† For highly-modified engines, use CC #031231 (SplitFire #SF416B) plug which is a colder plug. 

* For highly-modified engines, use CC #031235 (SplitFire #SF426C) plug which is a colder plug. 

CC #031230 SplitFire® plug replaces Screamin’ Eagle® #EX12S (OEM 32320-91) 

CC #031231 SplitFire® plug replaces Screamin’ Eagle® #EX12P (OEM 32321-91) 

CC #031232 SplitFire® plug replaces Screamin’ Eagle® #XL10S (OEM 32322-91) 

® 

Accel ® CycleLite Platinum Autolite Finewire Platinum SplitFire ® 

SplitFire 3 ® Spark Plugs 

SplitFire 3 ® spark plugs have taken the proven split-V 

electrode plug to a new level of performance. Featuring 

three platinum surfaces for the most reliable 

spark ever, and a fine-wire tip that actually requires 

less voltage to fire. Manufacturers lifetime warranty. 

Sold in pairs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$19.99 

Fits Evolution ® Big Twins from 1984 to present and 

Shovelheads from 1975 thru 1981 with stock or slightly 

modified engines (SplitFire ® #TP6E). 

031298 Replaces OEM 32998-01 


SplitFire ® Performance 

Spark Plugs 

Open “V” and twin radial arcs create 

a larger and more aggressive 

flame kernel. The dual tip improves 

exposure to the incoming fuel/air 

mixture producing a complete 

combustion cycle and reduced misfire. 

Result is more power, better 

gas mileage, less fouling, easier 

starting and smoother idle. 

CC #031233 SplitFire® plug replaces Screamin’ Eagle® #SH12S (OEM 32324-91) 

CC #031234 SplitFire® plug replaces Screamin’ Eagle® #EVS13S (OEM 32326-91) 

CC #031235 SplitFire® plug replaces Screamin’ Eagle® #EVS13P (OEM 32327-91) 

Champion ® Spark Plug Service Pack 

Convenient 24-pack of the best selling Champion plug for 

Evolution ® Big Twin engines from 1984 to present and Shovelhead 

engines from late 1978 thru 1981 (RN12YC) . . . . . .$65.40 

031217 Replaces HD ® 5R6A (OEM 32311-83)

Standard Spark Plugs 

Accel ® ‘U-Groove’ 

Spark Plugs 

The ground electrode builds the 

spark to a “ball of fire” flame providing 

a smoother idle and better 

combustion. Five-rib insulator prevents 

flashover and misfire, copper 

glass inner seal and electric heat 

seal prevent combustion leakage 

and fused copper/nickel center 

electrode has a wide heat range. 

Spark Plugs & Tools 

Size Model OEM Qty Accel # Part # Qty Autolite # Part # Qty Champion # Part # 

1450cc All Twin Cam 88 ® 1999-up 6R12 2 2418 22016 . . . .$6.29 4 4164 22183 . . . .$9.99 8 RA8HC 22122 . . .$20.99 

1340cc All Evolution ® 1984-up 5R6A 2 2410A† 22012 . . . .$6.29 4 4265 22185 . . . .$9.99 4 RN12YC 22129 . . .$10.99 

1340cc All Shovelheads 1982-84 5RL 2 2417 22014 . . . .$6.29 4 4345 22181 . . .$10.20 6 RN13LYC 22130 . . .$16.24 

1340cc All Shovelheads 1980-81 5R6A 2 2410A† 22012 . . . .$6.29 4 4265 22185 . . . .$9.99 4 RN12YC 22129 . . .$10.99 

1340cc All Shovelheads L1978-79 5A6A 2 2403A† 22011 . . . .$5.90 4 4265 22185 . . . .$9.99 4 N12YC 22121 . . . .$9.99 

1200cc All Evolution ® 1986-03; 6R12 2 2418 22016 . . . .$6.29 4 4164 22183 . . . .$9.99 8 RA8HC 22122 . . .$20.99 

Buell ® models 1988-03 

1200cc All Shovelheads L1978-80 5R6A 2 2410A† 22012 . . . .$6.29 4 4265 22185 . . . .$9.99 4 RN12YC 22129 . . .$10.99 

1200cc All Shovelheads 1975-E78 5A6A 2 2403A† 22011 . . . .$5.90 4 4265 22185 . . . .$9.99 4 RN12YC 22129 . . .$10.99 

1200cc All Big Twins 1948-74 3-4 2 2401* 22000 . . . .$5.90 4 4275 22186 . . . .$9.64 8 J12YC 22115 . . .$19.24 

1200cc Knuckleheads 1941-47 3 6 D16 22140 . . .$16.99 

1100cc All Evolution ® 1986-87 6R12 2 2418 22016 . . . .$6.29 4 4164 22183 . . . .$9.99 8 RA8HC 22122 . . .$20.99 

1000cc All Sportster ® 1979-85 4R5 2 2413 22013 . . . .$6.29 4 4123 22182 . . .$10.52 8 RL82YC 22123 . . .$26.99 

1000cc XR-1000 1983-85 6R7 2 2412 22010 . . . .$6.29 4 4252 22184 . . . .$9.64 

1000cc All Sportster ® 1972-78 4 2 2402** 22001 . . . .$5.90 4 4316 22180 . . . .$9.64 8 H8C 22120 . . .$19.49 

1000cc Knuckleheads 1936-47 3 6 D16 22140 . . .$16.99 

900cc All Sportster ® 1957-71 4 2 2402** 22001 . . . .$5.90 4 4316 22180 . . . .$9.64 8 H8C 22120 . . .$19.49 

883cc All Evolution ® 1986-03 6R12 2 2418 22016 . . . .$6.29 4 4164 22183 . . . .$9.99 8 RA8HC 22122 . . .$20.99 

750cc All 45s through 1973 3 6 D16 22140 . . .$16.99 

*Use CC #22005 (Accel #2401A), one step warmer, if plug 2401 (CC #22000) fouls. **Use CC #22004 (Accel #2402A), one step warmer, if plug 2402 (CC #22001) fouls. 

† CC #22002 one stage colder than CC #22011 CC #22009 one stage colder than CC #22012 

Flashlight Magnifier 

• Flashlight and magnifying 

glass in one 

• Perfect for reading spark 

plugs, jet sizes, and many 

other uses 

• Durable plastic head 

with chrome 

steel body . . . . . . . . . .$25.79 

20155 Flashlight magnifier 

Autolite Spark Plugs 

Longer insulators resist carbon 

fouling and operate efficiently 

over a wide heat range. Insulators 

seal against combustion pressure 

leakage and transfer heat from 

the lower insulator tip into the 

threads and cylinder head. Copper 

core center electrode is sheathed 

in nickel chromium alloy for superior 

heat dissipation and durability. 

‘Necked-down’ electrode requires 

lower sparking voltage for easier 

starting and heat range control. 


Champion Copper Plus 

Spark Plugs 

Features include a wider-base insulator 

which provides an easier path 

to speed the transfer of heat and a 

longer insulator nose containing a 

center electrode of pure copper 

inside of chrome-nickel to transfer 

heat between firings and help 

resist fouling. 

Accel ® U-Groove Autolite Standard Champion Copper Plus 

35200 

35199 

Accel ® Spark Plug Indexing Kit 

Precisely position spark plug ground electrodes 

to aim the spark and flame front 

across the combustion chamber for faster, 

more efficient burn. Billet aluminum tool 

with gold anodized finish. Copper indexing 

washers have varying thickness to allow 

exact aiming of plug gap. 

400420 Indexing kit . . . . . . . . . . . . . . . . .$42.99 

35200 Indexing tool ONLY . . . . . . . . . .$18.44 

35199 Indexing washers ONLY (30-pieces 

of assorted thickness) . . . . . . . .$27.51 

6.23 

Apparel 

Bike Kits 

& Trailers 

Seats 

& Bags 

Foot 

Controls 

Hand 

Controls 

Lighting 


Exhaust 

Intake 

Engine 

Gaskets 

Tranny 

& Clutch 

Driveline 

Wheels, 

Tires 

& Brakes 

Frames 

Forks 

& Shocks 

Sheetmetal 

General 

Cross 

Reference


6 

Spark Plug Covers & Neon Kits 

Chrome Spark Plug Covers by KüryAkyn 

Simply pushes over the spark plugs to cover the plugs and head bolts next to them. 

Chrome-plated die-cast construction. Sold in pairs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$39.99 

Note: Will not fit aftermarket head castings. 

48018 Fits Evolution ® Big Twin and Sportster ® models from 1984 to present 

6.24 

Purple 

23580 

23588 

23592 

23590 

48016 

48017 

‘Sine Waves’ by Glow Job 

Want your ride to be noticed and stand out in 

the crowd? Dr. Neon’s ‘Sine Waves’ is just want 

you’ve been looking for! These spark plug wires 

come in a variety of colors that create an intense 

neon glow on your motor. Include hi-performance 

black wire, chrome mounting bracket and 

all installation hardware. Fit all fuel injection, 

and High Energy Ignition (HEI) coil systems. 

Sold in pairs. 

609206 Yellow . . . . . . . . . . . . . . . . . . . . . . . . .$299.95 

609207 Green . . . . . . . . . . . . . . . . . . . . . . . . . .$299.95 

609208 Orange . . . . . . . . . . . . . . . . . . . . . . . . .$299.95 

609209 Red . . . . . . . . . . . . . . . . . . . . . . . . . . . .$299.95 

609210 Blue . . . . . . . . . . . . . . . . . . . . . . . . . . . .$299.95 

690211 Purple . . . . . . . . . . . . . . . . . . . . . . . . . .$299.95 


Lazer Nodes 

by KüryAkyn 

A brilliant color arc each time the 

spark plugs fire. They install easily 

in minutes anywhere along the 

spark plug wire and fit on all spark 

plug wires from 7mm to 9mm in 

diameter with absolutely no voltage 

drop. They’re compatible with 

all types of ignition systems. Sold 

in pairs. . . . . . . . . . . . . . . . . . . . .$20.14 

48015 Red 

48016 Amber 

48017 Blue 

Glow-Job Neon Tube Light Kits 

• Neon tube sets can be placed on your bike to give off a noticeable glow on either the 

frame rails, spark plugs or under your gas tank 

• Sets come in different shapes, colors and designs 

• Spark plug sets will not produce power loss even on high-performance ignition systems 

• Feature a lifetime warranty against defects in materials or workmanship 

Neon Tank and Frame Kits 

Mount under your tank or on your frame rails. 

Neon ‘Double Tube’ Kits (sets of two) 

23580 Purple . . . . . . . . . . . . .$219.99 

23581 Blue . . . . . . . . . . . . . . .$219.99 

23582 Red . . . . . . . . . . . . . . .$219.99 

Neon Spark Plug Wire Sets 

Spark plug sets include new spark plug wires (sold in pairs). 

‘Z’ Style Kits 

23586 Purple . . . .$149.95 

23587 Blue . . . . . .$149.95 

23588 Red . . . . . . .$149.95 

690218 Yellow . . . .$139.99 

690219 Green . . . . .$139.99 

690220 Orange . . .$139.99 

‘Double Helix’ Style Kits 

23592 Purple . . . .$329.95 

23593 Blue . . . . . .$329.95 

23594 Red . . . . . . .$329.95 

609200 Yellow . . . .$329.95 

609201 Green . . . . .$329.95 

609202 Orange . . .$329.95 

Neon ‘Triple Tube’ Kits (sets of three) 

23583 Purple . . . . . . . . . . . . .$326.99 

23584 Blue . . . . . . . . . . . . . . .$326.99 

23585 Red . . . . . . . . . . . . . . .$326.99 

‘Chevron’ Style Kits 

23589 Purple . . . .$159.99 

23590 Blue . . . . . .$159.99 

23591 Red . . . . . . .$159.99 

609203 Yellow . . . .$159.99 

609204 Green . . . . .$159.99 

609205 Orange . . .$159.99

Spark Plug Covers & Alternator Rotors 

Finned Head Bolt and Spark Plug Covers 

Sand-cast finned covers incorporate an innovative hidden 

mounting bracket that is securely attached to Original 

Equipment head bolts with set screws and holds the cover 

firmly in place. When installed, these covers look completely 

natural, and give your motor a whole new look. Fit Evolution ® 

Big Twin and Sportster ® motors from 1986 to present. Sold in 

pairs. 

14350 Black finish with bright fins . . . . . . . . . . . . . . . . . . . .$67.99 

14351 Natural aluminum finish . . . . . . . . . . . . . . . . . . . . . . .$61.69 

Heavy Duty Forged Alternator Rotor by Spyke ® 

Thicker-than-stock black powder forged steel rotors have encapsulated 

magnets for durability. Features more steel around the critical spline 

contact area for better engagement. Ideal for high RPM performance 

applications. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$147.99 

28597 Fits Softail ® and Dyna Glide models from 1991 to present 

Spark Plug and Head Bolt Covers 

Chrome-plated die-cast aluminum covers slide 

over spark plugs. Sold in pairs. . . . . . . . . . . . .$41.69 

78118 Fits Evolution ® Big Twins from 1986 

thru 2000 

78119 Fits Evolution Sportster ® models from 

1986 thru 2003 (with straight-boot plug 

wires only) 


KüryAkyn ‘Scorpion ’ 

Head Bolt Covers for 

Twin Cam 88 ® Models 

These covers add a classy touch, 

and are held in position with set 

screws, insuring rattle-free performance. 

With this design, the 

spark plugs can be removed without 

taking the covers off. 

Sold in pairs. . . . . . . . . . . . . . . .$51.99 

48271 Fits all Twin Cam 88 ® models 


Heavy Duty Alternator Rotors 

Made from billet alloy steel with encapsulated magnets. They work with 

stock of aftermarket stators, and are thicker-than-stock with greater 

spline engagement for performance applications. Made in USA. . . . .$214.99 

16986 Fits FL and FX models from 1970 thru 1990, and FXR and FLT models 

from 1980 to present (except Fuel Injected models) 

16985 Fits Softail ® and Dyna Glide models from 1991 to present 

Compu-Fire ® Alternator Rotor for S&S Shafts 

Replacement rotor for Evolution ® Big Twins using S&S 

sprocket shafts. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$123.99 

23226 Alternator rotor for 32 amp and 40 amp charging systems 

6.25 

Apparel 

Bike Kits 

& Trailers 

Seats 

& Bags 

Foot 

Controls 

Hand 

Controls 

Lighting 


Exhaust 

Intake 

Engine 

Gaskets 

Tranny 

& Clutch 

Driveline 

Wheels, 

Tires 

& Brakes 

Frames 

Forks 

& Shocks 

Sheetmetal 

General 

Cross 

Reference


6 

Charging Systems 

3-Phase Charging System by Thunder Heart 

This 38 amp 3-phase charging system was designed to fit Evolution ® 

engines to provide more current delivery for EFI, and other electrical accessories. 

Provides 65% more charging power for increased battery life and 

easier starting. 

• Converts an original 22 amp 2-phase system to a 38 amp 3-phase system 

on any Evolution ® , RevTech ® , and S&S engines 

• System reaches full charge at 550-650 RPM! 

• Digitally calibrated for optimum charging level over a wide temperature 

range 

• Rugged, billet aluminum regulator housing is highly polished for custom 

look 

• Regulator operation is self-temperature compensated to control heat 

and optimize service life 

• Over-temperature protection prevents catastrophic heat failure under 

severe operating conditions 

• Fits all aftermarket and Original Equipment Evolution ® Big Twin engines 

640332 3-Phase charging system . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$361.90 

Matching Compensator Shafts 

Required to match primary offset (sold separately) 

640333 Compensator shaft and nut for 0" primary offset . . . . . . . . . . . .$89.91 

640334 Compensator shaft and nut for 1/2" primary offset . . . . . . . . . .$95.01 

640335 Compensator shaft and nut for 17/16" primary offset . . . . . . . . .$98.99 

6.26 


Spyke ® Super-Duty 32 Amp Charging Systems 

Heavy-duty forged steel rotors featuring encapsulated magnets, thick 

gauge stator windings with three rib plugs, and durable solid-state voltage 

regulators, in your choice of black or chrome finishes. 

Fit Softail ® and Dyna Glide models from 1991 thru 1999 

28849 With black regulator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$234.99 

Fits all Big Twins from 1970 thru 1989, FXR models from 1990 thru 2000, 

and carbureted FLT, FLHT, FLHS and Road King ® models from 1990 thru 

1998 (except Fuel Injected models) 

28836 With chrome regulator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$252.99 

Custom Chrome ® Charging System Upgrade Kits 

Enjoy a remarkable improvement in electrical performance by installing 

one of these Custom Chrome ® 32-amp systems. Each one includes a 

Premium ® alternator, C.C. Rider ® rectifier/regulator and an alternator rotor. 

Fit all Big Twins from 1970 thru 1999. 

56230 With black rectifier/regulator . . . . . . . . . . . . . . . . . . . . . . . . . . . .$212.99 

56232 With chrome rectifier/regulator . . . . . . . . . . . . . . . . . . . . . . . . . .$219.99

23242 

610011 

Compu-Fire ® Charging Systems 

A must have for overloaded electrical systems! 

• Made in the USA to deliver increased charging 

• Systems include stator, rotor and voltage regulator 

32 Amp Charging Systems 

Each kit includes a stator, rotor and a black rectifier/regulator. 

17016 Fits all Big Twin engines with Original Equipment sprocket 

shafts from 1981 thru 1999 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$244.94 

23229 Fits all S&S Evolution ® Big Twin engines or stock engines 

with S&S sprocket shafts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$254.89 

40 Amp Charging Systems 

610010 Charging system for Twin Cam 88 ® Touring models 

from 1999 thru 2001 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$449.79 

610011 Charging system for Evolution ® Touring models 

from 1990 thru 1998 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$449.79 

23242 Fits all S&S Evolution ® Big Twin engines or stock engines 

with S&S sprocket shafts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$451.12 

23230 Fits all Big Twin models (except Touring models) with Original 

Equipment sprocket shafts from 1981 thru 1999 . . . . . . . . . . . . .$440.91 


610016 Rectifier/regulator for CC #’s 610010 and 610011 

(repl. OEM 74505-97) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$207.12 

610017 Alternator rotor for CC #’s 610010 and 610011 

(repl. OEM 29981-95) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$124.86 

17014 Alternator rotor for CC #17016 . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$102.00 

23226 Alternator rotor for CC #’s 23229 and 23242 . . . . . . . . . . . . . . . . .$123.99 

610014 40 amp stator for CC #610011 (repl. OEM 29987-99) . . . . . . . . .$160.65 

610015 40 amp stator for CC #610010 (repl. OEM 29987-97) . . . . . . . . .$160.65 

17018 32 amp stator for CC#’s 17016 and 23229 . . . . . . . . . . . . . . . . . . . . .$79.94 

23241 40 amp stator for CC #’s 23242 and 23230 . . . . . . . . . . . . . . . . . . .$146.06 


Charging Systems 

75215 

Original Equipment Charging System Kits and Parts 

These are Original Equipment parts. 

22 Amp Alternator Kit 

Replace the antiquated charging system in your older model bike with this 

22 amp alternator kit. Includes rotor, stator and a black rectifier/regulator. 

675005 Fits all Big Twin models from 1970 thru 1988 (was stock 

on all models from 1983 thru 1988) OEM 29982-81 . . . . . . . . . .$396.49 


Replace your wimpy 22 amp alternator with this 32 amp high-output 

alternator kit, or use to replace a worn out system. Includes rotor, stator 

and a black rectifier/regulator. 

75215 Fits all Big Twin models with diaphragm clutches from late 1984 

thru 1997 (except Softail ® models from 1984 thru 1988). 

Was stock on all models from 1989 thru 1995 and on some 

select models from 1996 thru 1997 (OEM 29985-87) . . . . . . . . . .$434.69 


Includes rotor, stator and a black rectifier/regulator. 

75269 Fits Touring models from 1994 thru 1996 (OEM 29921-95) . . . .$579.99 

Components 

75266 Stator for FXR and Touring models from 1991 thru 1996 

(OEM 29969-95) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$119.99 

75350 Stator for Big Twins from 1989 thru 1999 (except FXR 

and Touring models), and earlier models fitted with 

accessory 32 amp alternator kit (OEM 29970-88C) . . . . . . . . . . . .$107.99 

75268 Black rectifier/regulator for FXR and Touring models 

from 1991 thru 1996 (OEM 74505-95) . . . . . . . . . . . . . . . . . . . . . . .$309.99 

75267 Rotor for Touring models (repl. OEM 29981-95) . . . . . . . . . . . . . .$114.99 

75214 Rotor for all Big Twin models from 1982 to present 

(OEMs 29957-81B, 29957-85A) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$117.34 

Compu-Fire ® Stators 

Either direct replacement or high-output upgrade versions, with 

high-quality precision machine windings. 

17018 32 amp stator for most carbureted Evolution ® Big Twins 

from 1989 thru 1999 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$79.94 

23241 40 amp stator (for high-output charging system kits) . . . . . . . .$146.06 

6.27 

Apparel 

Bike Kits 

& Trailers 

Seats 

& Bags 

Foot 

Controls 

Hand 

Controls 

Lighting 


Exhaust 

Intake 

Engine 

Gaskets 

Tranny 

& Clutch 

Driveline 

Wheels, 

Tires 

& Brakes 

Frames 

Forks 

& Shocks 

Sheetmetal 

General 

Cross 

Reference


6 

Stators 

Premium ® Stators for Big Twin and Sportster ® Models 

The best stator that money can buy. Manufactured in the U.S.A. Available in seven 

versions to fit most Big Twins from 1970 thru 1999 and alternator-equipped Sportster ® 

models from late 1984 thru 1990. Due to the high quality of these Premium ® parts, 

they are eligible for Custom Chrome’s ‘high voltage’ limited electrical warranty. 

For Sportster ® Models 

56222 Molded, for Sportster ® models from late 1984 thru 1990 

(repl. OEM 29967-84) Plug “E” . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$65.39 

56223 Unmolded, for Sportster ® models from late 1984 thru 1990 

(repl. OEM 29967-84A) Plug “E” . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$62.39 

For Big Twin Models 

56225 Unmolded, for Big Twin models from 1970 thru 1975 

(repl. OEM 29965-70) Plug “A” . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$90.39 

56226 Molded, for Big Twin models from 1976 thru 1980 

(repl. OEM 29965-75) Plug “B” . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$65.39 

56227 Molded, for Big Twin models from 1981 thru 1988 

(repl. OEM 29965-81) Plug “C” . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$59.29 

56228 Unmolded, for Big Twin models from 1981 thru 1988 

(repl. OEM 29965-81A) Plug “C” . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$55.29 

56229 Unmolded, for Big Twin models from 1989 thru 1999, and 

earlier models with the accessory 32 amp. alternator kit 

(repl. OEM 29970-88C) Plug “D” . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$53.19 

Stator Mounting Screws 

Set of Torx ® head screws for mounting stators to engine cases. 

Measure 10-24 x 1"-long. 

75272 Replaces OEM 2720 (set of 4) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$6.12 

Set of Torx ® head screws for mounting 

stators to engine cases. Measure 10-24 x 

11/4"-long. 

17268 Replaces OEM 2918 

(pack of 10) . . . . . . . . . . . . . . .$10.99 

Stator Mounting Kit 

030608 Includes lock plates, plug retainer 

and hardware. Fits Big Twins 

1970-up . . . . . . . . . . . . . . . . . . . .$7.54 030608 KIT 

6.28 

A B C D E 

56226 

56229 


Accel ® ‘Lectric’ Stators 

Made in the U.S.A. from the finest components, these highquality 

stators are backed by a lifetime replacement warranty 

18875 Molded, for Sportster ® models late 1984 thru 1990 

(repl. OEM 29967-84) Plug “E” . . . . . . . . . . . . . . . . .$88.35 

18874 Unmolded, for Sportster ® models late 1984 thru 1990 

(repl. OEM 29967-84A) Plug “E” . . . . . . . . . . . . . . . .$87.11 

18877 Unmolded, for Sportster ® models from 1991 thru 2003 

(repl. OEM 29967-89) Plug “E” . . . . . . . . . . . . . . . . .$88.49 

18870 Unmolded, for Big Twins 1970 thru 1975 

(repl. OEM 29965-70) Plug “A” . . . . . . . . . . . . . . . .$134.92 

18871 Molded, for Big Twins 1976 thru 1980 

(repl. OEM 29965-75) Plug “B” . . . . . . . . . . . . . . . . .$96.49 

18872 Molded, for Big Twins 1981 thru 1988 

(repl. OEM 29965-81) Plug “C” . . . . . . . . . . . . . . . . .$87.11 

18873 Unmolded, for Big Twins 1981 thru 1988 

(repl. OEM 29965-81A) Plug “C” . . . . . . . . . . . . . . . .$87.11 

18876 Unmolded, for Big Twin models (except Touring models) 

from 1989 thru 1999, and Touring models from 

1989 thru 1995, as well as earlier models with the 

accessory 32 amp. alternator kit (repl. OEM 29970-88) 

Plug “D” . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$87.11 

668029 Unmolded, for Touring models from 1997 thru 1998 

with 38 amp. alternator (repl. OEM 29987-97) .$173.84 

668028 Unmolded, for Touring models from 1999 thru 2001 

with 38 amp. alternator (repl. OEM 29987-99) .$173.84 

Stator Mounting Screws 


Measure 10-24 x 1"-long. 

75272 Replaces OEM 2720 (set of 4) . . . . . . . . . . . . . . . . . . . .$6.12 


Measure 10-24 x 11/4"-long. 

17268 Replaces OEM 2918 (pack of 10) . . . . . . . . . . . . . . . .$10.99 

Stator Mounting Kit 

030608 Includes lock plates, plug retainer and hardware. 

Fits Big Twins 1970-up . . . . . . . . . . . . . . . . . . . . . . . . . .$7.54

Stainless Steel Alternator Plug 

Retainer 

Highly-polished part bolts to the front motor 

mount. Fits all Big Twin models (except EFI and 

Twin Cam 88 ® models) from 1970 thru 1999.$15.49 


19284 

19282 

Alternator Plug Retainers 

Standard and chromed heavy-duty retainers 

prevent rectifier/regulator plugs from working 

loose. Fit all Big Twin models (except EFI and 

Twin Cam 88 ® models) from 1970 thru 1999. 

19284 Standard retainer (held by engine 

case bolts) card of 5 . . . . . . . . . . . . . .$17.60 

19282 Chrome-plated heavy-duty model 

(held by front motor mount bolt) 

card of 5 . . . . . . . . . . . . . . . . . . . . . . . .$27.90 

Alternator Plug Retainer 

Comes with self-tapping screws unlike the 

Original Equipment part it replaces. Fits 

Big Twins from 1970 to present. 

Sold on a card of 5. . . . . . . . . . . . . . . . . . . . .$1.24 ea. 

19281 Replaces OEM 29954-71 

Compu-Fire ® High Performance 

Series Voltage Regulators 

• New generation series regulator obsoletes 

outmoded shunt regulators 

• Black powder coated, bolt-on replacements 

• Voltage output is suitable for 

maintenance-free batteries 

• Reduces load on stator and extends stator life 

• Reduces engine drag for extra power 

• Delivers high performance at an 

exceptional cost! 

17030 32 amp for Evolution ® Big Twin models 

from 1989 thru 1999 . . . . . . . . . . .$83.16 

17031 22 amp for Big Twin models 

from 1981 thru 1988 . . . . . . . . . . .$83.16 

17032 17.8 amp for Big Twin models 

from 1976 thru 1980 . . . . . . . . . . .$85.33 


from 1970 thru 1975 . . . . . . . . . . .$88.41 

17034 19 amp for Sportster ® models 

from 1984 thru 1990 . . . . . . . . . . .$85.33 

17035 22 amp for Sportster ® models from 

1991 thru 2003 and Buell ® models 

(except Blast ® and Firebolt models) 

from 1993 thru 2002 . . . . . . . . . . .$85.33 

12492 

17030 


Regulators 

Compu-Fire ® Chrome Billet Series 

Voltage Regulators 

Offering the same sophisticated technical features 

as their line of OEM-style regulators, but in 

an attractive “bullet-proof” chrome billet case 

with mounting bracket. 

23235 32 amp for Evolution ® Big Twin models 

from 1989 thru 1999 . . . . . . . . . .$146.78 


from 1981 thru 1988 . . . . . . . . . .$146.78 

23237 17.8 amp for Big Twin models 

from 1976 thru 1980 . . . . . . . . . .$148.92 


from 1970 thru 1975 . . . . . . . . . .$151.57 


from 1984 to 1990 . . . . . . . . . . . .$148.92 


from 1991 thru 2003 and Buell ® models 

(except Blast ® and Firebolt models) 

from 1993 thru 2002 . . . . . . . . . .$146.78 

23225 Chrome OEM-style replacement 

voltage regulator (not shown) .$192.85 

12493 

18900 

23235 

Accel ® Mechanical Regulators 

Top-quality American-made units feature heavy-duty shock mounted steel bases, vibration-resistant 

internal wire connections, fiber and mylar insulated pads, and large diameter contact surfaces. 

12-Volt Bosch-Style. Fits XLH from 1965 thru 1966 and XLCH from 1965 thru 1977 

12495 Black (repl. OEM 74511-65) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$34.60 

12492 Chrome . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$40.62 

12-Volt Delco-Style. Fits FL Models from 1965 

thru 1969 and XLH from 1967 thru 1977 

12493 Chrome (repl. OEM 74507-85T) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$64.14 

6-Volt Delco-Style. Fits 1954 thru 1964 KH, XL and XLH Models, 

and 1952 thru 1964 6-Volt FL models 

18901 Black (repl. OEM 74510-47TA) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$46.95 

18900 Chrome (repl. OEM 74508-85T) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$61.78 

6.29 

Apparel 

Bike Kits 

& Trailers 

Seats 

& Bags 

Foot 

Controls 

Hand 

Controls 

Lighting 


Exhaust 

Intake 

Engine 

Gaskets 

Tranny 

& Clutch 

Driveline 

Wheels, 

Tires 

& Brakes 

Frames 

Forks 

& Shocks 

Sheetmetal 

General 

Cross 

Reference


6 

Rectifier / Regulators 

C.C. Rider ® Finned Rectifier/Regulators 

American-made rectifier/regulators are utilize the latest state-of-the-art 

surface-mount technology. Unlike many products on the market today, our 

rectifier/regulators are made with screen-printed circuit boards and ceramic 

components which lower operating temperatures for longer life without 

temperature-related failures. They deliver improved electrical performance 

for lighting, battery and ignition which also helps protect valuable power 

sources and wiring. They’re covered by our exclusive ‘High Voltage’ limited 

warranty that effectively extends coverage to one full year from date of 

installation. Standard black finish with polished fins or fully chromed. 

See table for applications. 

C.C. Rider ® Solid-State Voltage Regulators 

for Generator Models 

American-made solid-state voltage regulators replace earlier-style mechanical 

regulators on generator-equipped bikes. No battery needed for lights if 

used with magneto. Covered by our exclusive ‘High Voltage’ limited warranty 

that effectively extends coverage to one full year from date of installation. 


C.C. Rider ® Low Profile Rectifier/Regulators 

Here’s a smooth custom look for a very visible part on the front of your 

bike. We’ve taken our reliable, American-made C.C. Rider ® rectifier/regulators 

and built them in a low-profile case for a clean new look. As with all of 

our electrical components, they’re covered by our standard limited warranty 

and, due to their outstanding quality, are fully eligible for our exclusive 

‘High Voltage’ limited warranty that effectively extends coverage to one 

full year from date of installation. See table for applications. 

6.30 

25444 


Accel ® Voltage Rectifier/Regulators 

Solid-state designs feature Accel’s ball burnished or black baked enamel 

finish. Regulators are individually tested before shipment and packaged 

with complete installation instructions and warranty card. 


Accel ® 668026 

Solid-State Voltage Regulators 

for Generator Models 

Accel solid-state technology in American-made regulators to replace 

mechanical regulators on generator-equipped bikes. 3-wire universal 

connection with 10" leads – tan-armature, green-field, red-battery. 


25016 

668025 

Accel ® ‘Arlen Ness Signature Edition’ Solid-State 

Rectifier/Regulators 

American-made units feature a unique design and show-chrome plating. 

Regulators are individually tested before shipment and include installation 

instructions and a warranty card. See table for applications.

Rectifier / Regulators 

A B C D E F 

Solid State Rectifier/Regulators 

030530 

G H J K L 

Accel ® 

Plug Replaces C.C. Rider ® C.C. Rider ® Accel ® Style OEM #(s) Finned Low Profile Solid State 

‘Arlen Ness 

Signature’ 

Chrome Black Chrome Black Chrome Black Chrome 

Fit all Twin Cam 88 ® Softail ® models from 2001 to present 

K 74540-01 

74610-01 

648365 

$76.95 

648364 

$67.00 

668024 

$148.57 

668025 

$136.19 

Fit all 2000 Twin Cam 88 ® H 74512-00 648363 648362 668022 668023 

Softail ® models 74561-99A $65.00 $57.00 $118.63 $108.89 

Fit all Twin Cam 88 ® Dyna Glide H 74518-99A 648361 648360 668020 668021 

models from 1999 thru 2003 74561-99A $65.00 $57.00 $105.29 $96.48 

Fit all Touring models H 74505-97 648367 648366 668026 668027 

from 1997 thru 2001 $97.00 $84.00 $199.13 $179.22 

Fit Evolution ® Big Twins (except EFI 

models and 1997-up Touring models) 

from 1989 thru 1999, and models 

with HD 

J 74519-88 

74537-93A 

25372 

$71.99 

25353 

$63.99 

36459 

$75.99 

36458 

$63.99 

25444 

$107.57 

25437 

$110.52 

25016 

$131.78 

® accessory 32 amp stator kit 

Fit all Big Twin models 


A 74515-86, 74516-86 

74513-85, 74512-84 

74513-82A 

25367 

$59.49 

25360 

$51.99 

36457 

$75.99 

36456 

$59.99 

25483 

$95.40 

25436 

$95.98 

Fit all Big Twin models 


C 74510-75A 

74512-79A 

25366 

$59.49 

25359 

$51.99 

36455 

$65.99 

36454 

$59.99 

25489 

$78.17 

25435 

$91.13 

Fit all Big Twin models B 74510-70A 25365 25358 25488 25434 

from 1970 thru 1975 $59.49 $51.99 $105.63 $91.13 

Fit Sportster ® models L 74523-94 25329 25328 668018 668019 

from 1994 thru 2003 74490-00 $75.99 $54.99 $96.00 $94.94 

Fit Sportster ® models F 74523-92 25352 25351 668016 668017 

from 1992 thru 1993 $59.49 $51.99 $96.00 $94.94 

Fit 1991 5-speed F 74523-91 25350 25349 25485 25479 

Sportster ® models $59.49 $51.99 $93.84 $91.38 

Fit Sportster ® models F 74523-84A 25364 25357 668014 668015 

from 1986 thru 1990 $59.49 $51.99 $96.00 $94.94 

Fit Sportster ® models with F 74523-84 25363 25356 

alternator late 1984 thru 1985 $59.49 $51.99 

Fit Sportster ® models with D 74504-82 25362 25355 25482 25431 

generator 1982-early 1984 $59.49 $51.99 $92.03 $91.10 

Fit Sportster ® models 1978 E 74504-78 25361 25354 25498 25430 

thru 1981, XLCR 1977-1978 $59.49 $51.99 $85.86 $87.52 

Solid State Voltage Regulators to Replace Mechanical Regulators On Generator Models 

Fit 12-volt Sportster ® models 

1965 thru 1977, FL models G n/a 25371 25369 25480 25439 

1965 thru 1969 $56.49 $51.99 $78.17 $78.17 

Fit 6-volt Sportster ® and FL G n/a 25370 25368 

models from 1958 thru 1964 $56.49 $51.99 

030531 


Donnie Smith Signature Series 

Alternator Plug Retainers 

Designed by Hall of Fame master builder, Donnie Smith, this 

regulator plug retainer attaches to the engine case, insuring 

that the plug stays in place. This will prevent the charge between 

the stator and regulator from being disrupted, and in turn, running 

your battery down. It’s made from chrome plated cast aluminum 

and comes with the necessary mounting hardware. 

030530 Fits Big Twin models 1970 thru 1988 . . . . . . . . . . . .$26.69 

030531 Fits Big Twin models 1989 to present . . . . . . . . . . .$29.09 

6.31 

Apparel 

Bike Kits 

& Trailers 

Seats 

& Bags 

Foot 

Controls 

Hand 

Controls 

Lighting 


Exhaust 

Intake 

Engine 

Gaskets 

Tranny 

& Clutch 

Driveline 

Wheels, 

Tires 

& Brakes 

Frames 

Forks 

& Shocks 

Sheetmetal 

General 

Cross 

Reference


6 

Generators & Generator Parts 

6.32 

19772 

19782 

26160 

26161 

Generator Parts 

25020 

12080 

Listed below in CC part number order 

12080 Gasket. Fits 1958-early 1984 Sportster ® and Big Twin models 

(repl. OEM 30143-58) pack of 10 . . . . . . . . . . . . . . . . . . . . . . . . . . . .$5.99 

15927 12-volt field coils. Fit 1965-1981 Sportster ® and Big Twin models 

(repl. OEM 30201-65T) sold in pairs . . . . . . . . . . . . . . . . . . . . . . . .$20.79 

19324 12-volt armature. Fits 1965-1981 Sportster ® and Big Twin models 

(repl. OEM 30851-65TA) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$69.99 

19772 14-tooth drive gear. Fits 1963-early 1984 Sportster ® models 

(repl. OEM 31073-63TA) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$7.99 

19782 13-tooth drive gear. Fits 1958 thru 1969 Big Twin models 

(repl. OEM 31070-58T) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$7.99 

Accel ® Generator Brush Sets 

Premium-quality, American-made generator brush sets for twoand 

three-brush generators. Sets are pressure-molded and precision-ground 

for long life from carbon-graphite. Retaining 

springs are made from piano-grade tin music wire, with brass 

terminals fitted to copper alloy braided cable leads. 

54061 

15927 

19324 

15927 


Custom Chrome ® 

12-Volt Generators 

These replacement units fit Big Twin and 

Sportster ® models. Machine-wound armatures, 

hardened shafts and premium bearings are used 

throughout. Available in standard black enamel 

finish or in show-quality chrome. Fits 1965 thru 

1969 Big Twins and 1965 thru 1981 Sportster ® 

models with12-volt generators 

25921 Black (repl. OEM 29975-65TA) . . .$179.99 

25920 Chrome (repl. OEM 29976-83T) . .$199.99 

26363 

25306 

25020 Bearing, drive gear. Fits 1958 thru 1981 Big Twin and Sportster ® 

models (repl. OEM 9007) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$5.39 

25306 Oil seal, end cover. Fits 1961 thru 1973 Big Twin and Sportster ® 

models (repl. OEM 12002) pack of 5 . . . . . . . . . . . . . . . . . . . . . . . .$9.60 

26160 Oil deflector (repl. OEM 31035-58) sold each . . . . . . . . . . . . . . . .$9.49 

26161 Washer, oil deflector (repl. OEM 31067-63) pack of 10 . . . . . . .$9.49 

26363 Needle bearing, end cover (repl. OEM 9088) sold each . . . . . .$10.99 

54061 Oil seal, drive gear. Fits 1946 thru 1981 Sportster ® and Big 

Twin models (repl. OEM 30145-46A) pack of 10 . . . . . . . . . . . .$15.59 

CC Model Generator Replaces 

Part # Year Model Application Type/Voltage OEM # 

12341 1958-64 FL, FLH Twins, XL, XLH, XLCH Twins #58 & 61/6V 

$5.02 1965-69 FL, FLH Twins #64/12V 30426-58 

1965-81 XLH, XLCH, XLS Twins 

12343 1952-57 FL, FLH, “K” Series Twins #52/6V 30425-51 

$16.98 

1948-52 FL, FLH Twins (Panhead) 

1941-47 E, F, FL Twins (Knucklehead) 

12340 1932-52 G, W, WL, WLA Twins (Flathead) #32/6V 30425-32 

$16.87 1937-47 U, UL (Flathead) Twins 

1937-48 UH, ULH (Flathead) Twins

Accel ® Generator Armature 

This American-made 12-volt armature features: heavy gauge 

copper wire windings; precision- machined and finished 

shafts; long-life, solid copper commutator and heavy service 

lamination segments. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$111.62 

25502 Fits Sportster ® models from 1965 thru 1981 

and Big Twins from 1965 thru 1969 

(repl. OEMs 30851-65A, 30851-86T) 

Accel ® Generator Field Coils 

Features, high-strength, warp-free laminates; heat-resistant, 

heavy-gauge, copper core wiring; woven cloth laminate 

insulation (not paper); precision-soldered field and ground 

terminals and each pair is matched for exact amperage 

values. Sold in pairs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$39.78 

25503 Fits all 12-volt #65, #64 and #66A model 

generators on Harley ® models from 1965 

thru 1981 (repl. OEM 30201-65) 

Chrome 

Generator Cover 

Installs in minutes and fits 

Sportster ® models from 1957 thru 

1981 and Big Twins from 

1958 thru 1969. . . . . . . . . . . . . .$12.89 


Generators & Generator Parts 

Chrome Generator End Cover Kit 

This die-cast end cover is the perfect finishing 

touch for the generator on both stock and custom 

motorcycles. It installs easily in minutes and 

fits all Sportster ® models from 1957 thru 1981 

as well as 1958 thru 1969 Big Twins. . . . .$15.74 


C.C. Rider ® Generator Regulator 

with Integral Charging Monitor 

Cure electrical system reliability problems with 

the C.C. Rider ® solid state regulator with integral 

charging LEDs. It attaches directly to the end of the 

generator and is enclosed in a die-cast aluminum housing 

with polished fins on the end. Solid state components are completely sealed in epoxy to 

eliminate moisture and vibration problems giving completely reliable service. Green and 

red LEDs give continuous readout of system performance. . . . . . . . . . . . . . . . . . . . .$119.99 

28092 Fits all Sportster ® models from 1965 thru 1977 and FL models from 1965 thru 1969 

with 12-volt generators 

C.C. Rider ® Solid-State Regulator with Chrome End Cover 

American-made, solid-state regulator has screen-printed circuit boards and ceramic 

components to lower operating temperatures and insure longer life. Installs in minutes 

and eliminates mounting problems. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$96.99 

28615 Fits all Sportster ® models from 1965 thru 1977 and FL models from 1965 thru 1969 

with 12-volt generators 


Accel ® Generator Repair Kit 

Top-quality American-made generator repair kit for 12-volt, 

2-brush generators. Fits FL models from 1965 thru 1969 and 

Sportster ® models from 1965 thru 1981. Kit includes a pair 

of brushes, gasket, seal and packet of grease. . . . . . . .$14.02 

25515 Repair kit 

6.33 

Apparel 

Bike Kits 

& Trailers 

Seats 

& Bags 

Foot 

Controls 

Hand 

Controls 

Lighting 


Exhaust 

Intake 

Engine 

Gaskets 

Tranny 

& Clutch 

Driveline 

Wheels, 

Tires 

& Brakes 

Frames 

Forks 

& Shocks 

Sheetmetal 

General 

Cross 

Reference


6 

Generator & Regulator Parts & Covers 

Ritchie’s Regulator Bracket by Paul Yaffe Originals 

When building a Twin Cam 88 ® B-motor powered custom, you have to use 

one of the new oval regulators. Our billet bracket permits it to be mounted 

discretely on the front of your motor below the oil filter. Problem solved! 

Machined from 6061-T6 aluminum with a polished upper exposed edge to 

complement chrome regulators. Includes all mounting hardware. . . . .$43.99 

600038 Fits Twin Cam 88 ® B-motors 

6.34 

19259 

19261 

Regulator Brackets 

These chrome brackets mount solid-state regulators 

on models with solidly-mounted motors. 

19259 Fits Big Twins from 1970 thru 1975 

(repl. OEM 74533-70TA) . . . . . . . . . .$19.89 

19261 Fits Big Twins including Softail ® models 


(repl. OEMs 74533-75, 74534-80) .$21.69 

Chrome Rectifier Regulator 

Mounting Bracket 

Fits rubber-mounted 5-speed models from 

1980 thru 2003 (except Dyna Glide models). 

This reproduction steel bracket has an extra set 

of holes for a second mounting position when 

relocating the rectifier/regulator on custom 

applications. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$17.19 


Doss Chrome Regulator 

Covers for Dyna Glides 

These chrome-plated stamped 

steel covers have three vent slots 

to permit air to circulate around 

and keep the regulator cool. Complete 

with chrome-plated hardware 

and instructions. . . . . . .$75.99 

46171 Fits all Dyna Glide models 


Billet Steel Regulator Relocation 

Blocks by Paul Yaffe Originals 

Billet steel blocks replace front motor mount 

nuts for a clean 45° regulator position under 

the front motor mount. Primered and ready 

for custom paint. . . . . . . . . . . . . . . . . . . . . . . . .$49.29 

47650 Sold in pairs 

Universal Voltage Regulator 

Mounting Bracket 

Use this bracket to mount any of our solid-state 

voltage regulators. . . . . . . . . . . . . . . . . . . . . . . .$24.52 

25481 Fits 4-speed Big Twins 


36160 

36251 

Chrome Regulator 

Bracket 

by Thunder Cycle 

Billet aluminum bracket features 

slotted mounting design to work 

with offset motors. . . . . . . . . .$85.99 

42183 Fits Big Twin models without 

rubber-mounted 

engines 

36147 

36265 

Colony Generator 

Mounting Hardware 

36270 

Acorn-Style Screw Kits 

36147 Fits Big Twins 1958 thru 1969 . . . .$8.89 

36160 Fits Sportster ® models 

1971-early 1984 . . . . . . . . . . . . . . . . .$8.89 

Chrome Sockethead Screw Kits 

36251 Fits Sportster ® models 

1971-early 1984 . . . . . . . . . . . . . . . . .$7.22 



Generator Repair Kit 

Fits all Original Equipment two-brush generators 

from 1958 thru 1981. . . . . . . . . . . . . . . .$9.49 

20069 Complete kit


Spyke ® Starters 

Spyke ® SuperTorque 1.4KW Starters 

High-performance motors demand high-performance 

starting power, which is exactly what Spyke ® starters are 

built to provide. Full 1.4KW rating, which is up to 200% 

more torque than Original Equipment. Increased cranking 

speed and low amperage-draw design delivers fast, reliable 

starts with less battery drain. 

For Big Twins from 

1994 to present 

28661 Black . . . . . .$379.99 

28683 Silver finish$379.99 

28671 Chrome . . .$479.99 

28596 Polished . . .$399.99 


1989 thru 1993 

28660 Black . . . . . .$379.99 

28682 Silver finish$379.99 

28670 Chrome . . .$479.99 

28595 Polished . . .$399.99 


1986 thru 1988 

28663 Black . . . . . .$439.99 

28679 Chrome . . .$484.99 

28662 Polished . . .$464.99 

For Big Twins with 4- 

Speed and Rear 

Belt Drive from 1980 

thru 1986 

28948 Black . . . . . .$409.99 

28946 Chrome . . .$409.99 

28947 Polished . . .$484.99 

For Big Twins with 

Rear Chain Drive 

(except rubber-mounted 

models) 

from Late 1979 thru 

1985 

28665 Black . . . . . .$409.99 

28698 Chrome . . .$484.99 

28664 Polished . . .$399.99 

For Rubber-Mounted 

Big Twins 

(except enclosed rear 

chain) 


28676 Black . . . . . .$409.99 

28699 Chrome . . .$484.99 

28675 Polished . . .$399.99 

For Big Twins with 

Rear Chain Drive 

from 1965-Early 1979 

28667 Black . . . . . .$409.99 

28690 Chrome . . .$484.99 

28666 Polished . . .$399.99 

For Sportster ® and 

Buell ® Models 


28669 Black . . . . . .$439.99 

28668 Polished . . .$409.99 

Spyke ® Late Model High-Torque Starters 

These units deliver superior cranking power with approximately 

the same amperage draw as their Original Equipment 

counterparts. 

Chrome 

28613 1.8KW for Big Twins from 1989 thru 1993 . . .$484.99 

28618 1.8KW for Big Twins from 1994 to present 

(except Dyna Glide models) . . . . . . . . . . . . . . . . .$484.99 

28629 2.4KW for Big Twins from 1989 thru 1993 

(except Touring models) . . . . . . . . . . . . . . . . . . . .$534.99 



Polished 

28614 1.8KW for Big Twins from 1989 thru 1993 . . .$439.99 


(except Dyna Glide models) . . . . . . . . . . . . . . . . .$439.99 

28631 2.4KW for Big Twins from 1989 thru 1993 




6.35 

Apparel 

Bike Kits 

& Trailers 

Seats 

& Bags 

Foot 

Controls 

Hand 

Controls 

Lighting 


Exhaust 

Intake 

Engine 

Gaskets 

Tranny 

& Clutch 

Driveline 

Wheels, 

Tires 

& Brakes 

Frames 

Forks 

& Shocks 

Sheetmetal 

General 

Cross 

Reference


6 

Starters 

Motor Factory ® 1.4kw High Torque Starters 

These starters will out perform any of the 1.5kw to 1.8kw starters used to start high compression/high 

performance engines. The manufacturer is so confident in that statement, 

that they provide a lifetime warranty on the starter clutch. This clutch will come standard 

on all Motor Factory ® 1.4kw starters. 

Other features include: 

• Double wound and balanced armatures 

• Heavy-gauge field coils, and hi-temp welded carbon brushes 

• Hi-temp grease 

• Solenoid coils are staked to withstand excessive vibration 

• Heavy-duty steel intermediate gears 

• Life tested to O.E. specifications 

• 25% more torque and RPM than Original Equipment 1.2kw starters while operating 

with a stock specification or H-D ® OEM battery 

Fit Big Twin Models from 1994 to Present 

644060 Raw finish . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$359.00 

644062 Black finish (replaces OEM 31335-03) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$359.00 

644064 Chrome finish (replaces OEM 31559-99) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$385.00 

Fit Big Twin Models from 1990 thru 1993 

644061 Raw finish . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$359.00 

644063 Black finish . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$359.00 

644065 Chrome finish . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$385.00 

6.36 

Compu-Fire ® ‘Gen III’ 

Starter 

The ‘Gen III’ turns over a full 2kw of 

starting power while only drawing 

175 amps from the battery. This 

chrome and polished starter features 

a removable jackshaft coupler, ultra 

powerful neodymium magnets, innovative 

high torque clutch and 6:1 

planetary gear reduction. It has the 

power to start large displacement, 

high compression motors, even without 

compression releases. All of this 

power is encased in a short, compact 

package. . . . . . . . . . . . . . . . . . . . . .$599.00 

643882 Fits all Evolution ® and Twin 

Cam 88 ® Big Twin models 


030394 


Starters by All Balls 

Starters feature all new construction and are backed by a 

limited lifetime warranty. Available in black or chrome/ 

polished finish. Starters include a special conversion jackshaft 

bolt that allows these starters to fit 1989-1999 Big Twin 

models (except FLT). 

030393 Black. 1.4 kw rate . . . . . . . . . . . . . . . . . . . . . . . . . . . .$257.84 

030394 Chrome/Polished. 1.4 kw rated . . . . . . . . . . . . . . .$347.59 

030395 Chrome/Polished. 1.7 kw rated (high output) .$398.34 

BDL High-Torque Starter 

Features a full 1.2 KW rating, which is up to 200% more 

torque than Original Equipment. Increased cranking speed 

and low amperage-draw design delivers fast, reliable starts 

with less battery drain. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$291.94 

42847 Fits BDL Shovelhead 3" open belt drive kits 

1970 thru 1978 and 1989 thru 1999 Big Twins 

(except Twin Cam 88 ® models)

47900 

47441 47445 47437 

47435 

47434 

47901 

High-Torque Starters by Terry Components 

When the decision has been made to build that high-compression or biginch 

engine, besides considering a battery with higher cold cranking amps 

and upgraded battery cables, there’s another motor to be considered... 

namely the starter motor. Depending on the compression, cam and ignition 

timing, the stock 1.2KW (1.4hp) starter simply won’t cut it. Bigger motors 

need a higher torque starter. Most motors under 96 cubic inches should 

1.4KW Starters for Big Twins 

47437 Polished for Big Twins from 1994 to present . . . . . . . . . . . . . .$364.95 

47439 Black for Big Twins from 1994 to present . . . . . . . . . . . . . . . . .$321.95 

47436 Polished for Big Twins from 1989 thru 1993 . . . . . . . . . . . . . . .$364.95 

47438 Black for Big Twins from 1989 thru 1993 . . . . . . . . . . . . . . . . . .$321.95 

1.6KW Starters for Big Twins (see note) 





2.0KW Starters for Big Twins (see note) 





1.6KW Starters for Sportster ® and Buell ® Models 

Fit all Sportster ® and Buell ® models from 1981 thru 2003. 

47448 Polished . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$364.95 

47449 Black . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$362.95 

47906 

47909 


Starters 

47905 

47903 

47904 

start easily with 1.4KW (2.0hp) motors. Starters with 2.0KW (2.6hp) capacity 

will start any engine, but there usually aren’t enough amps in the system 

with standard batteries and cables to give full power to the starter. The 

Terry Components 1.6KW (2.2hp) starter has no such limitations and is the 

answer to putting an end to hard starting big-inch engines with standard 

electrical components. 

Dipstick Oil Pan Adapters for ‘Dresser’ Models 

These adapters are required on FLT, FLHT, FLHS and Road King ® models 

from 1993 to present when Terry 1.6KW or 2.0KW starters are installed. 

47434 For use with 1.6KW starters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$56.99 

47435 For use with 2.0KW starters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$56.99 

Replacement Parts for Terry Starters 

47900 Solenoid repair kit (also fits most Original Equipment 

and aftermarket Nippon Denso starters) . . . . . . . . . . . . . . . . . . .$36.99 

47901 Starter brush holder for 1.4KW starters . . . . . . . . . . . . . . . . . . . .$22.99 

47902 Starter brush holder for 1.6KW and 2.0KW starters . . . . . . . . .$22.99 

47903 Armature for 1.4KW starters . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$101.00 



47906 Field coils for 1.4KW starters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$56.99 



47909 Starter clutch for 1.4KW starters . . . . . . . . . . . . . . . . . . . . . . . . . .$109.95 

47910 Starter clutch for 2.0KW starters . . . . . . . . . . . . . . . . . . . . . . . . . .$131.00 

Note: Installation of these starters on FLT, FLHT, FLHS and Road King® models may require the 

additional purchase of a Dipstick Oil Pan Adapter. 

Prestolite-Type Starter Motors 

Reproductions of the Original Equipment Prestolite electric starter motor used on many 

models from 1966 thru 1982. Chrome end cover kit and replacement parts are also available. 

26599 Black starter motor assembly (repl. OEM 31458-66TA) . . . . . . . . . . . . . . . . .$185.99 

28600 Chrome starter motor assembly (repl. OEM 31463-88T) . . . . . . . . . . . . . . . .$204.99 

28606 Chrome end cover (repl. OEM 31565-67) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$10.59 

28601 Armature (repl. OEM 31542-66T) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$89.99 

28602 Brush set (set of 4) repl. OEM 31541-66T . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$21.49 

28603 Complete brush holder assembly (repl. OEM 31537-66) . . . . . . . . . . . . . . . . .$25.99 

28604 Drive gear end ball-bearing (repl. OEM 31539-66) . . . . . . . . . . . . . . . . . . . . . .$12.49 

28605 Thru-bolt kit (repl. OEM 31535-66) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$10.99 

6.37 

Apparel 

Bike Kits 

& Trailers 

Seats 

& Bags 

Foot 

Controls 

Hand 

Controls 

Lighting 


Exhaust 

Intake 

Engine 

Gaskets 

Tranny 

& Clutch 

Driveline 

Wheels, 

Tires 

& Brakes 

Frames 

Forks 

& Shocks 

Sheetmetal 

General 

Cross 

Reference


6 

Starters & Jackshafts 

Hitachi-Type Starter Motors 

Reproductions of the Original Equipment Hitachi electric starter motor 

used on many models from 1973 thru 1988. A chrome starter end cover kit 

and Hitachi-type replacement parts are also available. 

28598 Black starter motor assembly (repl. OEM 31570-73) . . . . . . . . . .$185.99 

28599 Chrome starter motor assembly (repl. OEM 31559-89T) . . . . . .$204.99 

28606 Chrome starter motor end cover (repl. OEM 31565-67) . . . . . . . .$10.59 

28621 Armature with bearing (repl. OEM 31580-73T) . . . . . . . . . . . . . . .$96.99 

28622 Brush set (set of 4) repl. OEMs 31582-73, 31575-73 . . . . . . . . . . . .$13.99 

28623 Complete brush holder assembly (repl. OEM 31581-73) . . . . . . .$24.49 

28624 Drive gear end ball bearing (repl. OEM 31583-73) . . . . . . . . . . . . .$9.49 

28625 Thru-bolt kit (repl. OEM 31576-73) . . . . . . . . . . . . . . . . . . . . . . . . . . .$10.99 

Stock Replacement Starters for Late Model Big Twins 

Duplicates of the Original Equipment parts made by Nippondenso for all 

Big Twin models since 1991. Black wrinkle finish. 

28590 Fits Big Twins from 1994 to present (repl. OEM 31553-94) . . . .$394.99 

28589 Fits Big Twins from 1991 thru 1993 (repl. OEM 31553-90) . . . .$349.99 

6.38 


Replacement Starter Jackshaft Kits 

Complete jackshaft kits include starter shaft, coupling, pinion gear, clips, 

spring, locktab, washers and screws. 

28380 10-tooth for Big Twins 1994 to present . . . . .$149.64 

28381 9-tooth for Big Twins 1989 thru 1993 . . . . . . .$171.99 

Replacement Starter Motor Parts 

Listed below in OEM part number order. All parts are sold each unless 

noted otherwise. 

75290 Gear shaft screw for Big Twins from 1989 thru 1993 

(repl. OEM 4325) pack of 10 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$53.99 

75279 Gear shaft screw for Big Twins from 1994 to present 

(repl. OEM 4358) pack of 10 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$27.19 

75282 Retaining ring (repl. OEM 11182) pack of 10 . . . . . . . . . . . . . . . . . . .$7.19 



28386 Pinion gear for Big Twins from 1989 thru 1993 

(repl. OEM 31342-90) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$57.89 

75276 Pinion gear for Big Twins from 1994 to present 

(repl. OEM 31342-94) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$22.99 

75292 Pinion gear thrust washer for Big Twins from 1989 

thru 1993 (repl. OEM 31430-90) pack of 5 . . . . . . . . . . . . . . . . . . . . .$11.14 

75288 Thrust washer for Big Twins from 1989 thru 1993 

(repl. OEM 31430-93) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$7.69 

75277 Thrust washer for Big Twins from 1994 thru 2003 

(repl. OEM 31430-94) pack of 5 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$28.49 

28382 Coupling for Big Twins from 1989 thru 1993 

(repl. OEM 31548-90) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$12.59 

75289 Lockplate for Big Twins from 1989 thru 1993 

(repl. OEM 33126-93) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$1.89 

75278 Lockplate for Big Twins from 1994 to present 

(repl. OEM 33126-94) pack of 10 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$6.49 

28384 Extension shaft for Big Twins from 1989 thru 1993 

(repl. OEM 33127-90) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$63.09 

75273 Extension shaft for Big Twins from 1994 to present 

(repl. OEM 33127-94) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$65.99 

17267 Starter bolt O-ring for Big Twins from 1989 thru 1993 

(repl. OEM 33340-90) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$14.39 

92200 Starter shaft bushing for Big Twins from 1989 thru 1993 

(repl. OEM 33445-89) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$4.69 

75298 Original Equipment inner primary bushing for Big Twins 

from 1989 thru 1993 (repl. OEM 33445-89) . . . . . . . . . . . . . . . . . . . . .$9.59 

92201 Starter shaft bushing for inner primary on Big Twins 

from 1994 to present (repl. OEM 33445-94) . . . . . . . . . . . . . . . . . . . .$2.49 

92214 Starter shaft bushing for outer primary on Big Twins 

from 1994 to present (repl. OEM 33446-94) . . . . . . . . . . . . . . . . . . . .$2.49 

75286 Pinion gear spring for Big Twins from 1989 to 1993 

(repl. OEM 33449-90) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$4.19 

75275 Pinion gear spring for Big Twins from 1994 to present 

(repl. OEM 33449-94) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$1.29 

28383 Pinion coupling for Big Twins from 1989 thru 1993 

(repl. OEM 60647-90) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$36.99 

75280 Pinion coupling for Big Twins from 1994 to present 

(repl. OEM 60647-94) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$22.99

Starter Motor Housings 

Replacement starter motor housings that 

duplicate the Original Equipment parts which 

commonly have the mounting ears broken off. 

Needle bearing not included. 

09782 Fits 4-speed Big Twin models with 

Prestolite motor 1965-early 1979 

(repl. OEM 31465-65) 1/4-20 threads 

(use CC #28605 bolts) . . . . . . . . . . .$47.99 

09779 Fits 4-speed Big Twin models with 

Hitachi motor 1973-early 1979 

(repl. OEM 31572-73) 10-24 threads 

(use CC #28625 bolts) . . . . . . . . . . .$47.99 

09778 Starter housing bearing 

(repl. OEM 9062) sold each . . . . . .$5.09 

Starter 

Motor Armatures 

Replacement armatures for stock or aftermarket 

Prestolite-style or Hitachi-style starter motors. 

Fit Sportster ® models from 1967 thru 1980 and 

Big Twins from 1965 thru 1988. 

28601 Prestolite-style armature 

(repl. OEM 31542-66) . . . . . . . . . . .$89.99 

28621 Hitachi-style armature with bearing 

(repl. OEM 31580-73) . . . . . . . . . . .$96.99 

Solenoid Mounting Kit 

Fits Big Twin models from 1965 thru 1988 and 

Sportster ® models from 1967 thru 1980 with 

2 hole mounting tab. Includes mounting spacer 

bolts and lock washers . . . . . . . . . . . . . . . . . .$3.99 

050419 Replaces OEM 31452-65 

Starter Parts & Drives 

Starter Bearings 

Replacement bearings for Prestolite and Hitachi 

starter motors. Sold each. . . . . . . . . . . . . . . .$12.49 

28604 Fits all Prestolite starters on Big Twins 

from 1966 thru 1982 and Sportster ® 

models from 1967 thru 1973 or 1977 

thru 1980 (repl. OEM 31539-66) 

28624 Fits all Hitachi starters on Big Twins from 

1973 thru 1988 and Sportster ® models 

1974 thru 1976 (repl. OEM 31583-73) 

28627 

28626 

Starter Gear Shift Lever 

and Oil Deflector Plate 

Fit all Big Twin models with 4-speed transmissions 

and rear chain drives from 1965 thru 1984 

(except 1983 thru 1984 FL). 

28626 Shift lever (repl. OEM 31445-65A) .$7.54 

28627 Deflector plate with O-ring 

(repl. OEM 60516-65A) . . . . . . . . . . . .$9.49 

Chrome Starter Motor Bracket 

Fits 4-speed FL models from late 1966 thru 1982 

(except 1982 Classic). Sold each. . . . . . . . . . . .$6.19 

28610 Replaces OEM 31476-66 

Starter Shaft for Big Twins 

Fits all Big Twin models with 4-speed transmissions 

and rear chain drives from 1970 thru 1985 

(except 1983 thru 1984 FL models). . . . . . . .$26.49 

28616 Replaces OEM 31482-70 


Heavy Duty Starter Drive 

Beefier than the factory part for longer life 

with high torque starters. Fits all electric start 

models from 1965 thru 1988 (except 1981 thru 

1988 Sportster ® models). . . . . . . . . . . . . . . . .$26.94 

25531 Replaces OEM 31443-65TA 

Accel ® Starter Drive 

This American-made unit fits all electric start 

models from 1965 thru 1988 (except 

1981 thru 1988 Sportster ® models). . . . . .$47.16 


Starter Drive Clutch by Spyke ® 

Stock replacement for OEM 31663-90. . . .$114.99 

28960 Fits Big Twins from 1990 to present 

Spyke ® Starter Jackshaft Kits 

Includes starter shaft extension, couplings and 

components for complete starter installation. 

28678 Fits Big Twin models from 

1994 to present . . . . . . . . . . . . . . . .$147.99 

28677 Fits Big Twin models 

from 1989 thru 1993 . . . . . . . . . . . .$147.99 

6.39 

Apparel 

Bike Kits 

& Trailers 

Seats 

& Bags 

Foot 

Controls 

Hand 

Controls 

Lighting 


Exhaust 

Intake 

Engine 

Gaskets 

Tranny 

& Clutch 

Driveline 

Wheels, 

Tires 

& Brakes 

Frames 

Forks 

& Shocks 

Sheetmetal 

General 

Cross 

Reference


6 

Solenoids & Covers 

6.40 

25041 

Starter Solenoids 

(Single Bracket Style) 

A variety of imported or American-made Accel ® 

starter solenoids. Fit all Sportster ® models from 

1967 thru 1980 and Big Twins from 1965 thru 

1988 (with solenoid mounted parallel to primary 

cover) including all 4-speed models and all 

Softail ® models. 

Imported Starter Solenoid 

25041 Black (repl. OEM 71473-77B) . . . . .$36.09 

Accel ® Starter Solenoids 

25003 Plain (repl. OEM 71469-65TB) . . . .$38.56 

26430 Chrome (repl. OEM 71470-86T) . . .$50.95 

25044 

26430 

25043 

Starter Solenoids 

for 5-Speed Models 

A variety of imported or American-made Accel ® 

starter solenoids for all 5-speed Big Twin models 

from 1980 thru 1988 (except Softail ® models). 

Imported Starter Solenoids 

25043 Black (repl. OEM 31526-81B) . . . .$38.19 

25044 Chrome . . . . . . . . . . . . . . . . . . . . . . . .$41.19 

Accel ® Starter Solenoids 

25045 Plain (repl. OEM 31489-79TB) . . .$39.22 

25046 Chrome (repl. OEM 31511-90T) .$51.95 

Starter Solenoid Repair Kit 

Repair kit for the electric starter solenoids on all 

models from 1965 thru 1988 (except 1981 thru 

1988 Sportster ® models). . . . . . . . . . . . . . . . . .$17.59 


Spyke ® Solenoid Repair Kit 

Includes plunger assembly, spring and contacts. 

Fits Big Twins from 1990 thru 2003. . . . . . .$29.99 

28961 Replaces OEM 31604-91 

Starter Solenoid Repair Kit 

Kit includes seals, gaskets, solenoid plunger, 

copper terminals and contacts. Fits starter 

motors fitted to most Big Twin models from 

1989 thru 2003. . . . . . . . . . . . . . . . . . . . .$38.99 

25008 Replaces OEM 31604-91 

Solenoid Cover 

Starter Switches by CCE 

Use as a “back up” system or as a custom starter 

button. It bypasses the stock relay, permitting 

starter activation at the push of a hidden 

button. Fits stock bikes and customs using 

late-style 1.2 or 1.4 KW “compound” starter 

motors from 1991 to present. . . . . . . . . . . . .$83.00 

60258 Chrome 

60259 Polished 

60260 Black 


Chrome Solenoid Cover 

Fits the solenoid boot on Softail ® and 4-speed 

FL/FX models from 1965 thru 1988. . . . . . .$23.79 

25040 Includes a new solenoid boot 

Solenoid Inner Boot 

Rubber solenoid inner boot for all 1965 thru 

1988 Big Twins and 1967 thru 1980 Sportster ® 

models. Sold each. . . . . . . . . . . . . . . . . . . . . . .$3.74 


Rubber Solenoid Cover 

Rubber solenoid cover for 

Big Twin models. . . . . . . . . . . . . . . . . . . . . .$5.19 

25025 Replaces OEMs 31444-65A, 31475-77

Starter Relays 

American-made starter relays 

used on most models 1973 thru 2003. 

Fits FL and FX models 1973 thru 1979, Sportster ® models 1974 

thru 1979 and all models 1980 to present using round plastic, 

terminal-style relay. 

25004 Replaces OEM 71463-73A . . . . . . . . . . . . . . . . . . . . .$14.39 

Fits all models 1980 to present using either a metal or plastic 

square bodied ‘plug’ style relay. 

24998 Replaces OEM 31506-79B . . . . . . . . . . . . . . . . . . . . .$13.24 

Starter Boost Relay by Crane ® Cams 

Starter boost relay is the answer to weak starting performance. 

When installed, it improves and/or eliminates the voltage drop 

in single fire applications during cranking. Applies full battery 

voltage to the ignition (module and coil) and gets rid of the 1-2 

volt drop in the Original Equipment wiring harness. . . . . . .$13.09 


75217 

25004 

Starter Relays and Parts 

These are Original Equipment parts. 

24998 

75218 

Starter Relay 

Fits most models from 1980-early 1993. . . . . . . . . . . . . . . .$13.99 

75218 Replaces OEM 31506-79B 

Starter and Brake Light Relay with Diode 

Fits the starters on all models from late 1993 to present, and 

the brake light circuit on FLT, FLHT, FLHS and Road King ® 

models from 1991 to present. . . . . . . . . . . . . . . . . . . . . . . . .$13.99 


17060 

17293 

17050 

17294 

17059 

Starter Relays 

17060 Fits all 1980-up models using 

a metal or plastic square 

bodied ‘plug’ style relay 

(repl. OEM 31506-79B) . . . . . .$11.94 

17059 Same as CC #17060 but with an 

improved ‘weather-proof’ skirt to 

protect the connector block .$14.49 

17050 Fits FL and FX models 1973 thru 

1979, Sportster ® models 1974 thru 

1979 and all models 1980 thru 

2003 using round plastic, 

terminal-style relay 

(repl. OEM 71463-73A) . . . . . .$20.29 

Micro Starter Relay with Diode 

A replacement for the Original Equipment 

micro-sized unit fitted to all Big Twins 

from 2000 to present. 

17152 Replaces OEM 31522-00A . . . .$6.64 


Relays 

17152 

17518 

Standard Motor Products 

Top-quality American-made electrical 

parts for a wide variety of Harley- 

Davidson ® applications from the manufacturer 

of Blue Streak Performance 

Products. Sold each. 

Starter/Brake Light Relay with Diode 

Works with starters on all models from 

1993 to present, and the brake light circuit 

on FLT, FLHT, FLHS and Road King ® models 

from 1991 to present. 

17518 Replaces OEM 31504-91A . . . .$12.74 

Starter Relay Connectors 

with Pigtail Harness 

Connectors for use with CC #’s 17059 and 

17060. Also fits CC #’s 17518 and 75218 

relays if orange wire is not used. 

17293 Five lug . . . . . . . . . . . . . . . . . . . . .$11.34 

17294 Four lug . . . . . . . . . . . . . . . . . . . . .$11.34 

Circuit Breakers 

17064 15 amp (repl OEM 74587-94) . .$5.99 

17063 15 amp (repl. OEM 74589-73) .$4.69 

17062 30 amp (repl OEM 74599-79B) $4.69 

17061 50 amp (repl. OEM 74600-94) .$5.99 

19295 Mounting clip (repl. OEM 9952) 

card of 10 . . . . . . . . . . . . . . . . .$1.62 ea. 

6.41 

Apparel 

Bike Kits 

& Trailers 

Seats 

& Bags 

Foot 

Controls 

Hand 

Controls 

Lighting 


Exhaust 

Intake 

Engine 

Gaskets 

Tranny 

& Clutch 

Driveline 

Wheels, 

Tires 

& Brakes 

Frames 

Forks 

& Shocks 

Sheetmetal 

General 

Cross 

Reference


6 

Solenoid & Starter Covers 

Doss Starter End Covers for Softail ® Models 

These covers bolt-on in minutes to dress up the area under the oil tank. Four milled ‘speed lines’ highlight the cover 

which complements the other Doss accessories that can be found elsewhere in this catalog. 

28612 Fits all Softail ® models from 1989 thru 1999 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$31.39 

46536 Fits all Softail ® models from 2000 to present . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$39.69 

Note: The ‘Speed Lines’ in the photo have been painted for illustration only. 

Starter Relay Cover 

A chrome relay cover complete with mounting spacers and 

screws that fits all 4-speed FL models from 1965 thru 1984. 

15154 Replaces OEM 66425-68T . . . . . . . . . . . . . . . . . . . . . .$18.54 

6.42 

15228 

Chrome Starter Covers 

These chrome starter motor covers install in minutes 

and fit a wide variety of models. 

Fits 4-speed FL models (except Classic) from 1966 

thru 1982 and 1967 thru 1980 XLH with 

Prestolite starter motor. . . . . . . . . . . . . . . . . .$17.19 


Fits 4-speed FX models from 1974 thru 1986 and 

XLH models with Hitachi starter motors from 

1974-early 1976. . . . . . . . . . . . . . . . . . . . . . . . . .$17.19 


Electronic Control Unit for 

Ness-Tech ® Handlebar Controls 

with Button Switches 

Especially designed for use with Ness handlebar 

controls with button switches. Controls 

horn, signal lights, low and high beam. This 

single box replaces all those small units that 

mess up the electricity of your bike and comes 

with instructions for installation. Made in 

Germany. 

84898 Elektronikbox . . . . . . . . . . . . . .Call for price 

12292 


Chrome Starter 

End Cover 

A simple-to-install chrome 

starter motor end cover kit for all 

Sportster ® models from 1967 thru 

1980 and Big Twins with Hitachi or 

Prestolite starters from 1965 thru 

1988. . . . . . . . . . . . . . . . . . . . . . . .$10.59 

28606 Replaces OEM 31565-67 


No adjustment needed to mount 

this triple chrome-plated cover. 

It slides over the solenoid and 

mounts with existing bolts to 

the primary case. Fits all 4-speed 

Big Twins from 1965 thru 1986 

and all Softail ® models from 1984 

thru 1988. . . . . . . . . . . . . . . . . . .$21.23 



Clean-up the looks of your bike 

with this chrome cover for the 

starter solenoid. . . . . . . . . . . . .$17.09 

25036 Fits all models from 1991 

to present

65213 

65290 

65288 

65289 

Complete Wiring Harness Kits 

From front to rear, these harnesses include key 

switch, flashers and circuit breakers. They have 

easy-to-follow wiring diagrams, and are complete 

except for handlebar wiring. 

For Split Tank Big Twins 

65213 Fits most Softail ® and Big Twin 


with ‘flatside’ gas tanks . . . . . . . . .$461.95 

Kits for One-Piece Tanks 

Include side-mount wiring boxes with switches. 

65288 For use with stock handlebar 

controls and switches . . . . . . . . . . .$493.95 

65289 For use with custom 4-button 

handlebar controls and 

switches . . . . . . . . . . . . . . . . . . . . . . . .$493.95 

65290 For use without handlebar 

switches . . . . . . . . . . . . . . . . . . . . . . . .$493.95 

Wiring Harness Kits 

Electronic Harness Controller by Thunder Heart Performance Corp. ® 

Performs all fuse, relay and flasher functions in one small module. Electronic module utilizes all surface 

mount technology and microprocessor which eliminates cumbersome relays and flashers. High-tech circuit 

interrupters replace circuit breakers for a more compact and less complicated wiring harness. 

Improved serviceability, using industry standard AMP and Molex connectors for reduced harness clutter. 

Provides more sophisticated flasher performance (signal cancel on second command, hazards, etc). 

Water resistant package and connectors for trouble free operation in all conditions. Diagnostic LED's 

indicate short/overloaded circuits for easy troubleshooting. All connections are straight through, eliminates 

need for splices in the wire harness. Allows easy removal of components such as handlebars 

without cutting wires and optional rear turn signal flash with brakes lights. Kit includes full harness, 

connectors, terminals, heat-shrink tubing and wiring diagram. 

49202 For under tank mounting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$369.99 

49206 Plug-in driver for LED indicator lamps . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$89.99 

49207 Plug-in driver for standard incandescent indicator lamps . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$89.99 

65529 

65530 65531 

Black ‘Wrap-It ’ Wiring Harness Sleeving 

by Russell 

Lightweight oversleeve used to bundle and protect cable 

assemblies and wire harness from chaffing and cutting. The 

360° self-wrapping feature allows for quick, easy installation 

and removal without tools. Sold in 25 foot rolls. 

27016 3/16"-diameter . . . . . . . . . . . . . . . . . . . . . . . . .$3.20 per foot 

27017 5/16"-diameter . . . . . . . . . . . . . . . . . . . . . . . . .$3.36 per foot 

27018 1/2"-diameter . . . . . . . . . . . . . . . . . . . . . . . . . .$3.56 per foot 

27019 3/4"-diameter . . . . . . . . . . . . . . . . . . . . . . . . . .$4.08 per foot 


Side-Mount Wiring Harnesses 

by Pro-One 

Complete side mount wiring harnesses are 

designed for use when installing one-piece tanks. 

Chrome billet control box comes ready to install 

and available for use with or without stock handlebar 

switches. Fit all Softail ® models. . . . $524.95 

65529 Millennium-style for use with stock 

handlebar switches. Includes neutral light 

indicator 

65530 Millennium-style for use with custom 

4-button handlebar switches. Includes 

neutral light and high/low indicators 

65531 Millennium-style for use without handlebar 

switches. Includes neutral light, 

high/low indicators and a start button 

6.43 

Apparel 

Bike Kits 

& Trailers 

Seats 

& Bags 

Foot 

Controls 

Hand 

Controls 

Lighting 


Exhaust 

Intake 

Engine 

Gaskets 

Tranny 

& Clutch 

Driveline 

Wheels, 

Tires 

& Brakes 

Frames 

Forks 

& Shocks 

Sheetmetal 

General 

Cross 

Reference


6 

Wire Plus Wiring Harnesses 

6.44 

27546 

27545 

24682 

27549 

Seat Post Style 

Mounts to the seat post coil bracket on Big Twins from 1941 thru 1984 and 

custom frames using the same style coil mount. 

24681 Billet control module with harness for self-cancelling 

turn signals . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$554.99 

27545 Billet control module with harness for standard turn signals . .$554.99 

Motor Mount Style 

Mounts between cylinders to FXR style top motor mounts. 

27547 Billet control module with harness for self-cancelling 

turn signals . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$554.99 

27546 Billet control module with harness for standard turn signals . .$554.99 

Flatside Tank Style 

Mounts on the frame back bone of any bike equipped with flatside gas 

tanks as well as Softail ® models from 1984 thru 1995 

27549 Billet lid control module with harness for self-cancelling 

turn signals . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$465.99 

27548 Billet lid control module with harness for standard 

turn signals . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$436.73 

24689 Molded control module with Chopper-style harness 

(for use without handlebar switches) . . . . . . . . . . . . . . . . . . . . . . . .$356.99 

24688 

24691 


Custom Wiring Harness Kits 

Self-diagnosing wiring systems, from 

Wire Plus have LEDs that indicate the 

integrity of the various major circuits. 

An LED that changes colors from green 

to red, indicates a shorted circuit. 

Completely modern electronic designs 

feature solid state breakers that never 

need to be replaced, replaceable starter 

relays and all connections sealed in 

vibration and moisture resistant epoxy. 

Available in four styles; 

Seat Post (rear coil) mount has the ignition 

switch integrated in a chrome billet 

housing 

Motor Mount system has a chrome billet 

housing and mounts on FXR style top 

motor mounts 

Flatside Tank systems are installed 

on the frame between the ‘flatside’ 

Fat Bob gas tanks 

Mid-Frame systems mount in the oil 

tank area 

Note: All Wire Plus systems are configured to be 

used for standard turn signals OR auto-cancel 

turn signals using the same harness. This means 

that all the like products on this page with different 

part numbers for standard and auto-cancel 

turn signals will receive the same wiring system. 

The purchase of an auto-cancel module is 

required for all systems that are selected for 

auto-cancel turn signals. 

Mid-Frame Style 

Mounts in the oil tank area, an excellent choice for one-piece gas tank 

applications. 

24690 Billet lid control module with harness for standard 

turn signals . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$436.73 

24682 Billet lid control module with harness for non-turn, 

standard turn or auto cancel turn signals (system includes flasher 

for standard turns) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$436.73 

24686 Molded control module with harness for non-turn, 

standard turn or auto-cancel turn signals 

(system includes flasher for standard turns) . . . . . . . . . . . . . . . . . .$356.99 

24687 Molded control module with chopper style harness 

(for use without handlebar switches) . . . . . . . . . . . . . . . . . . . . . . . .$356.99 

Accessories 

Finishing touches for a sanitary wiring job. 

24691 Ignition switch housing for motor mount style systems 

(ignition switch included) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$84.99 

24692 Auto-cancel turn signal module (with load equalization) . . . . . .$89.99 

24697 High-Low latching module 

(momentary input with latching output) . . . . . . . . . . . . . . . . . . . . . .$42.99 

Custom Turn Signal Wire Harness by Wire Plus 

A perfect custom fit wiring system. Find satisfaction with this 105 Series 

mid-frame mounted, system featuring a central power control module. 

• Solid-state breakers that never need to be replaced and a replaceable 

starter relay 

• Water resistant system 

• Harness is pre-assembled with all terminals 

• Sockets and plugs installed requiring a minimal amount of assembly time 

• Provides full handlebar control functions and is available with standard 

turn signals 

• Includes all necessary connectors, sockets, pins, conduit and shrink tube 

695395 For models with 1984 thru 1995 style controls . . . . . . . . . . . . . . .$359.94 

Wire harness with load equalizer and auto cancel turn signal 

695396 For models with 1996 to present style controls . . . . . . . . . . . . . .$442.99

5 sizes to choose from 

Uni Filter Bulk Cable Ties 

100 black ties per package. 

5571537 4"-long . . . . . . . . . . . . . . . . . . . . . . . .$3.96 

5571540 51/2"-long . . . . . . . . . . . . . . . . . . . . . .$5.96 

5571543 71/2"-long . . . . . . . . . . . . . . . . . . . . . .$8.96 

5571547 11"-long . . . . . . . . . . . . . . . . . . . . . .$17.25 

5571550 15"-long . . . . . . . . . . . . . . . . . . . . . .$22.25 

Speedometer Calibrator 

by S&S Cycle 

OEM electronic speedometers are not 

adjustable, and any change in tire size or pulley 

size causes inaccurate readings. The 

Speedometer Calibrator allows the rider to correct 

electronic speedometers easily and without 

special tools or expensive test equipment. 

• Adjustments can be made between -29% and 

+69% in 1% increments 

• Unit is plugged in-line with the speedometer 

and sender 

• Small size permits easy mounting 

• Sealed for protection against the elements 

• Calibrator remains attached to motorcycle 

• Removing calibrator returns speedometer to 

OEM calibration 

• Easy to use, instructions included 

400290 Speedometer Calibrator . . . . . . .$119.95 

Wiring & Misc. Electrical 

Custom Chrome ® Turn Signal 

Load Equalizer 

Very small designed load equalizer exclusively 

for Custom Chrome ® . . . . . . . . . . . . . . . . . . . . .$19.95 


Back-OFF Brake Light Module 

Help those zoned-out drivers see you better. 

This compact solid-state electronic device converts 

an ordinary brake light into a high attention-grabbing 

alert signal when you are stopped 

or are stopping. When you apply your brakes, 

Back-OFF will automatically flash your brake 

light three times, then hold it steady for 31/2 seconds. 

This signal is repeated as long as the 

brakes are applied. This pattern is not random, 

it was selected for its ability to keep the attention 

of the drivers behind you. Installs in minutes 

with two connections. Made in the USA. 

330592 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$41.99 

75567 75566 

Original-Style Wiring Harnesses 

for Big Twin and Sportster ® Models 

Color-coded duplicates of original wiring looms. All wire 

ends are pre-attached for convenience. 

For FL Models 

26689 1948 thru 1957 (repl. OEM 70321-48) . . . . . . .$81.99 

26690 1958 thru 1964 (repl. OEM 70321-58) . . . . . . .$84.99 

26691 1965 thru 1969 (repl. OEM 70321-65) . . . . . . .$87.99 

26695 1970 thru 1972 (repl. OEM 70320-70) . . . . . . .$68.99 

26696 1973 thru 1977 (repl. OEM 70320-73) . . . . . . .$68.99 

26997 1978 thru 1979 (repl. OEM 70320-78) . . . . . . .$90.99 

26998 1980 thru 1981 (repl. OEM 70320-80) . . . . . . .$91.49 


Micro Harness Controller 


This kit consolidates all of the electronic functions 

of a motorcycle (with the exception of 

instrumentation and engine management) into 

one, easy-to-hide system! Perfect for choppers 

and for bikes with split tanks. 

• Billet aluminum controller housing 

• Unterminated 36 position "fantail" harness, 

shrink tubing, and all necessary connectors, 

and a comprehensive instruction and troubleshooting 

manual 

• Performs all fuse, relay, and signal cancelling 

functions in one simple package 

• Provides multiple flasher combinations, and 

all lighting functions 

• Reduces size, weight, and overall complexity 

of the electrical system 

• Utilizes relays to distribute all power functions, 

thus eliminating the need to run large 

wires to all the switches 

• Small size of controller housing allows multiple 

mounting locations both visible and hidden 

• Weather resistant connections for troublefree 

use in extreme environments 

• Trim-to-fit harness that is adaptable on most 

custom bikes 

640331 Micro Harness Controller . . . . . . . .$295.97 

Self-Cancelling Turn Signal Modules 

These are Original Equipment items. Excellent for 

stock replacement or custom projects. . . . .$134.99 

75567 Replaces OEM 68540-96 

75566 Replaces OEM 68537-83G 

For FX Models 

26697 1971 thru 1972 (repl. OEM 70326-71) . . . . . . .$68.99 

26698 1973 thru 1974 (repl. OEM 70326-73A) . . . . .$74.99 

648399 1975 thru 1977 (repl. OEM 70326-75) . . . . . . .$74.99 

26999 1980 thru 1985 FXWG 

(repl. OEM 70214-80A) . . . . . . . . . . . . . . . . . . . .$103.99 

For Sportster ® Models 

26994 1968 thru 1969 with turn signals 

(repl. OEM 70320-68) . . . . . . . . . . . . . . . . . . . . . .$99.99 

26995 1975 thru 1976 XLCH (repl. OEM 70001-75) .$81.99 

26996 1975 thru 1976 XLH (repl. OEM 70006-75) . .$81.99 

6.45 

Apparel 

Bike Kits 

& Trailers 

Seats 

& Bags 

Foot 

Controls 

Hand 

Controls 

Lighting 


Exhaust 

Intake 

Engine 

Gaskets 

Tranny 

& Clutch 

Driveline 

Wheels, 

Tires 

& Brakes 

Frames 

Forks 

& Shocks 

Sheetmetal 

General 

Cross 

Reference


6 

Badlands Wiring Modules 

6.46 

604901 

Self-Cancelling Turn Signal 

Module by Badlands 

This unique module will give any Harley ® that 

is not equipped with the self canceller, similar 

convenient features. Can be used with custom 

speedometers on late-model bikes. Includes 

simple wiring diagrams for stock OEM wiring, 

as well as custom wiring and also will work well 

on custom manufactured motorcycles. 

Features include: 

• Flashing automatically cancels after 9 seconds 

• Can be manually cancelled at any time 

• Solid state flasher has built-in emergency 

flasher mode 

• Runs bulbs or LEDs 

• Measures 27/8"-long, 13/8"-wide, 7/8"-deep 

• Includes wire connectors and simple diagrams 

604901 Amp style 10 pin plug for models 

from 1987 thru 1993 . . . . . . . . . . . . .$83.95 

604902 Deutsche 8 pin plug for models 

from 1994 to present . . . . . . . . . . . .$94.95 

604903 Deutsche 12 pin plug for models 

from 1994 to present . . . . . . . . . . . .$94.95 

Badlands Load Equalizer III 

• Fits all models equipped with the TSSM security/alarm 

module or the TSM turn signal 

module from 1991 to present 

• Must be used on all Harley-Davidson ® models 

from 2000 to present! 

• Works flawlessly with the new generation of 

Harley-Davidson modules and is compatible 

with most of the custom turn signals available, 

including (tiny) wedge bulbs and LEDs 

• If you have a security key icon that is not 

functioning correctly (stays on all the time) or 

your turn signals blink erratically, this module 

will solve any related problem 

• This new module produces absolutely no heat 

and is also intended for the 1991 thru 1999 

H-D ® standard turn signal modules 

• Will run emergency flashers for any amount 

of time and is designed for parade use 

• American-made with quality components 

699997 Sold each . . . . . . . . . . . . . . . . . . . . . . . .$69.95 

Run, Brake & Turn 

Signal Plug-In 

by Badlands 

A three-in-one illuminator increases visibility 

from the rear of the motorcycle! This plug-in 

module turns stock or custom rear turn signal 

lights into combination running and brake lights 

while maintaining their turn signal function. 

Compatible with the new TSM and TSSM module/security 

system. Features include: 

• Built-in load equalizer 

• Designed for late model bikes that have the 

factory security system, as well as earlier style 

turn signal modules 

• Works with Original Equipment turn signals 

• Works on single filament bulbs and halogens 

• Runs multiple marker lights or turn signals 

• Includes wire connectors and simple diagrams 

604900 Fits Sportster ® models from 1999 thru 

2003, Dyna Glide and Touring models 

from 1997 thru 2003,and Softail ® models 

from 1996 thru 2003 . . . . . . . . . . . .$118.95 

Badlands “The Illuminator” 

Run, Brake and Turn Module 

• Triples your visibility in the rear 

• Install a pair of red lens and your bike has 

3 running lights. Hit your brake and you have 

3 brake lights. Touch your turn signal button, 

and you maintain your turn signal function 

while the other side remains a running light, 

or if you are braking, a brake light 

• Built-in load equalizer 

• Runs your stock OEM turn signals 

• Runs custom turn signals , Halogen and LEDS 

too 

• Easy to follow instructions and connectors 

included 

• Made in the USA with quality components 

• Fits all models from 1965 thru 1995 as well as 

Sportster models from 1996 thru 1998, and 

1996 Dyna Glide and Touring models (newer 

models use “Plug-In” version, CC #604900, 

for convenience) 

36944 Sold each . . . . . . . . . . . . . . . . . . . . . . . .$99.95 


Badlands Automatic Turn Signal 

Shut Off Module III 

• Gives any Harley-Davidson ® or custom built 

motorcycle without the 1991 and up self canceller, 

the same similar convenient features 

• Also will work well on custom manufactured 

motorcycles without the cancelling feature 

• 9 second timed flashing that automatically 

cancels or can be manually cancelled at any 

time (quick lane change) 

• Has a built-in solid state flasher and emergency 

flasher mode 

• Built-in load equalizer runs LEDS up to 100 

watts per side 

• Measures 27/8"-long x 13/8"-wide x 7/8"-deep 

• Includes wire connectors and simple wiring 

diagrams for stock OEM wiring, and custom 

bike wiring 

• American-made with quality components 

12675 Sold each . . . . . . . . . . . . . . . . . . . . . . . .$88.99 

Badlands Load Equalizer I & II 

Load Equalizer I 

Designed to return amperage draw to the correct 

factory specifications when aftermarket 

marker lights are used to replace stock turn signals. 

The self-cancelling Brain Box must have the 

correct draw in order to function properly. The 

load equalizer can also be used in conjunction 

with a heavy duty flasher on early model bikes, 

when small marker lamps are being used as turn 

signals. For LEDs use the Load Equalizer III. Fits 

from 1973 thru 1999. 

12690 Load Equalizer I . . . . . . . . . . . . . . . . .$23.95 

Load Equalizer II 

The Load Equalizer II performs exactly the same 

function as the Load Equalizer with the added 

feature of allowing you to retain emergency 

flasher capability , when the bike is shut off. 

This unit has a built-in thermister, it helps cut 

down on the heat while your bike is functioning 

in the emergency flasher mode. For LEDs use the 

Load Equalizer III. Fits from 1973 thru 1999. 

36924 Load Equalizer II . . . . . . . . . . . . . . . . .$32.95

Circuit Breaker Clips 

Reproductions of the stock zincplated 

parts. Includes aluminum 

rivet. Used many applications to 

hold the turn signal flasher unit 

and the circuit breakers. . . .$1.62 ea. 

19295 Replaces OEM 9952 

(sold on a card of 10) 

Hi-Low Beam Relay 

Special 12-volt relay allows control 

of the headlight hi-low beam from 

one wire using a momentary (horn 

type) button. . . . . . . . . . . . . . .$32.99 


Premium 

Hazard Flasher 

Stock replacement hazard light 

flasher unit for all models (except 

1989 thru 1990 Touring models) 

from 1965 thru 1990. . . . . . . .$4.99 


Universal Toggle Switch 

Handles 6 or 12-volt applications 

up to 35 amps. It was used for the 

spotlamps on 4-speed FL models 

from 1962 thru 1984 and Heritage 

Softail ® Classic models from 1987 

thru 2003. . . . . . . . . . . . . . . . . . . .$6.49 

26097 Replaces OEMs 67844-70 

and 67858-89 

Misc. Electrical Components 

Terminal Box Assembly 

An accurate reproduction of the electrical terminal 

box is insulated and painted black. Includes 

all necessary mounting hardware. . . . . . . .$40.66 

36182 Fits 45" models and Big Twins 


Electric Terminal Plate 

A perfect reproduction of the Original Equipment 

part. Fits FX and FL models from 1970 

thru 1977. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$17.99 

35633 Replaces OEM 72300-70 

Electrical Junction Blocks 

Universal connection blocks have brass-nickel 

plated links and are rated for up to 30 amp 

loads. Available with four, six or eight connection 

terminals. 

17707 Four connections . . . . . . . . . . . . . . . .$7.09 

17706 Six connections . . . . . . . . . . . . . . . . .$10.19 

17705 Eight connections . . . . . . . . . . . . . .$12.84 

17062 


17063 

617526 

Ride with peace of mind 

eMonitor Engine System Monitor 

• Designed to monitor the charging system, oil pressure 

and battery health 

• Designed for 12-volt, four stroke engines 

• It is perfect for motorcycles not equipped with instruments 

or an added audible feature for motorcycles equipped with 

instruments 

• There are distinctive tones for low voltage, high voltage, 

oil pressure failure and battery health 

• Checks battery health each time you turn on your ignition 

switch and can be heard over open pipes while on the road 

• This device is small enough to be concealed under your 

seat or tank 

• Easy to install with only 4 wires, comes with easy-to-follow 

instructions 

• Lifetime replacement guarantee 

693580 Sold each . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$89.00 

17064 

17061 

Standard Motor Products Circuit Breakers 

Top-quality American-made electrical parts for a wide variety 

of Harley-Davidson ® applications from the manufacturer of 

Blue Streak Performance Products. Sold each. 

17064 15 amp (repl OEM 74587-94) . . . . . . . . . . . . . . . . . . . .$5.99 

17063 15 amp (repl. OEM 74589-73) . . . . . . . . . . . . . . . . . . .$4.69 

17062 30 amp (repl OEM 74599-79B) . . . . . . . . . . . . . . . . . . .$4.69 

617526 40 amp (repl OEM 74600-97A) . . . . . . . . . . . . . . . . . . .$5.99 

17061 50 amp (repl. OEM 74600-94) . . . . . . . . . . . . . . . . . . .$5.99 

19295 Mounting clip (repl. OEM 9952) card of 10 . . . .$1.62 ea. 

6.47 

Apparel 

Bike Kits 

& Trailers 

Seats 

& Bags 

Foot 

Controls 

Hand 

Controls 

Lighting 


Exhaust 

Intake 

Engine 

Gaskets 

Tranny 

& Clutch 

Driveline 

Wheels, 

Tires 

& Brakes 

Frames 

Forks 

& Shocks 

Sheetmetal 

General 

Cross 

Reference


6 

Switches & Deutsch Connectors 

Accel ® Hydraulic Brake Switches 

Top-quality Accel rear brake light switches for 

most models. They feature heavy-duty contacts 

and brass terminals. 

Fits ServiCar from 1951 thru 1973 and 1958 

thru 1970 FL models. 

25505 Replaces OEM 72002-51A . . . . . . . . .$9.71 

Fits Big Twin models from 1971 to present 

(except 1973 thru 1977 FX), and Sportster ® 


25506 Replaces OEM 72023-51A . . . . . . . .$10.41 

6.48 

17715 

25505 

17716 

25506 

Brake Switches 

Top-quality hydraulic rear brake light switches 

for most models. Heavy-duty contacts and 

quality brass terminals. . . . . . . . . . . . . . . . . . . .$8.89 

Fits Big Twin models from 1971 to present 

(except 1973 thru 1977 FX), and Sportster ® 



Fits ServiCar from 1951 thru 1973 and 1958 

thru 1970 FL models. 


Oil Pressure Switches 

Replacement switches have heavy-duty contacts 

and thermoplastic insulator. Made in the USA. 

Fits Evolution ® Big Twin models from 1984 

thru 1999 (except models with electric oil 

pressure gauges). . . . . . . . . . . . . . . . . . . . . . . . . .$8.19 

17714 Replaces OEM 26561-84 

Fits Sportster ® models from 1977 

thru 2003. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$11.39 

17713 Replaces OEM 26554-77 

Fits Big Twins from 1941 thru 1984 (except 

Evolution ® models), and Sportster ® and 

K models from 1954 thru 1976. . . . . . . . . . . . .$8.09 

17712 Replaces OEM 26552-72 

23498 

Deutsch ‘DT Series’ Connectors 

If you demand a trouble-free electrical system, 

then you need Deutsch connectors. They’re environmentally-sealed 

to keep out moisture and other 

contaminants, and use fail safe secondary locks 

for maximum contact retention. Silicone seals 

withstand conditions of extreme temperature 

and moisture. Can be used with either solid-copper 

crimp type contacts for critical circuits or stamped 

and formed contacts. Accepts AWG 18 thru 16 wire. Features integral connector latch, rugged 

thermoplastic housing, silicone seals, choice of solid or stamped contacts and a 13 amp rating. 

Sold each except as noted. 

Ignition Sensor Connector Kits/Speedo Sensor/3 pin Connector Kits 

Fit all Big Twin and Sportster ® models with 3-pin connectors from 1994 thru 2003. 

23498 Black kit (includes one each of CC #’s 23462, 23485, 23474, 23491, plus three pins 

and three sockets) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$11.49 

23499 Grey kit (includes one each of CC #’s 23463, 23485, 23475, 23491, plus three pins 

and three sockets) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$8.99 

Receptacles 

Require one of the appropriate Secondary Locks and the appropriate quantity of Pin Connectors. 

Black Receptacles 

23460 2-pin (repl. OEM 72102-94BK) . . . . .$2.49 

23462 3-pin (repl. OEM 72103-94BK) . . . . .$3.34 

23464 4-pin (repl. OEM 72104-94BK) . . . . .$4.19 

23466 6-pin (repl. OEM 72106-94BK) . . . . .$6.49 

23468 8-pin (repl. OEM 72108-94BK) . . . .$10.99 

23470 12-pin (repl. OEM 72109-94BK) . . .$11.49 

Secondary Locks 

23484 2-pin (repl. OEM 72142-94) . . . . . . . .$0.94 

23485 3-pin (repl. OEM 72143-94) . . . . . . . .$0.94 

23486 4-pin (repl. OEM 72144-94) . . . . . . . .$0.94 


6Pin 12Pin 

4Pin 

2Pin 

3Pin 

8Pin 

Grey Receptacles 

23461 2-pin (repl. OEM 72102-94GY) . . . . .$2.49 

23463 3-pin (repl. OEM 72103-94GY) . . . . .$3.34 

23465 4-pin (repl. OEM 72104-94GY) . . . . .$4.99 

23467 6-pin (repl. OEM 72128-94GY) . . . . .$6.49 

23469 8-pin (repl. OEM 72108-94GY) . . . . .$9.89 

23471 12-pin (repl. OEM 72109-94GY) . .$13.99 

23487 6-pin (repl. OEM 72146-94) . . . . . . . .$0.94 

23488 8-pin (repl. OEM 72148-94) . . . . . . . .$1.99 

23489 12-pin (repl. OEM 72149-94) . . . . . .$1.99 

Pin Connectors 

23510 Solder-on solid-copper pins (repl. OEM 74190-98) (packs of 10) . . . . . . . . . . . . . . . . . . . . . . . . . .$7.99 

23508 Crimp-on stamped and formed pins (repl. OEM 72190-94) (packs of 100) . . . . . . . . . . . . . . . .$46.99 

Crimp Tool 

For installing pins. 

20721 Crimp tool . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$21.49 

Plugs 

Require one of the appropriate Socket Locks and the appropriate quantity of Socket Connectors. 

Black Plugs 

Grey Plugs 

23472 2-socket (repl. 72112-94BK) . . . . . . .$3.49 23473 2-socket (repl. 72112-94GY) . . . . . . .$3.69 




23480 8-socket (repl. 72118-94BK) . . . . . .$10.99 23481 8-socket (repl. 72118-94GY) . . . . . . .$9.49 

23482 12-socket (repl. 72119-94BK) . . . . .$13.99 23483 12-socket (repl. 72119-94GY) . . . . .$13.99 

Socket Locks 

23490 2-way (repl. OEM 72152-94) . . . . . . .$0.79 

23491 3-way (repl. OEM 72153-94) . . . . . . .$0.79 

23492 4-way (repl. OEM 72154-94) . . . . . . .$0.79 

23493 6-way (repl. OEM 72156-94) . . . . . . .$0.79 

23494 8-way (repl. OEM 72158-94) . . . . . . .$1.99 

23495 12-way (repl. OEM 72159-94) . . . . . .$1.99 

Socket Connectors 

23511 Solder-on solid-copper sockets (repl. OEM 74191-98) (packs of 10) . . . . . . . . . . . . . . . . . . . . . .$24.49 

23509 Crimp-on stamped and formed sockets (repl. OEM 72191-94) (packs of 100) . . . . . . . . . . . . .$69.99

Accel ® Oil Pressure Switches 

American-made units with heavy-duty contacts, brass ferrule, 

thermoplastic insulator and a bright finish. 

Fits Sportster ® and K models from 1954 thru 1976 and 

Big Twins from 1941 thru 1984 (except Evolution ® models). 

25460 Replaces OEM 26552-72 . . . . . . . . . . . . . . . . . . . . . .$9.11 

Fits Sportster ® models from 1977 thru 2003 

25463 Replaces OEM 26554-77 . . . . . . . . . . . . . . . . . . . . .$12.27 

Fits Evolution ® Big Twin models from 1984 thru 1999 

(except models with electric oil pressure gauge) 

25464 Replaces OEM 26561-84 . . . . . . . . . . . . . . . . . . . . . .$8.73 

25536 

25464 

25460 

17902 

Switches & Circuit Breakers 

25463 

17901 

658444 658445 

Transmission Neutral Switches 

25536 Fits 4-speed FL models from 1959 thru 1964 and FX 

models with ratchet top from late 1973-early 1979 

as well as Evolution ® Big Twin and Sportster ® models 

(repl. OEM 33900-59C) . . . . . . . . . . . . . . . . . . . . . .$12.49 

84899 Fits 4-speed Big Twin models with ‘pancake’ top 

from 1979 thru 1986 (repl. OEM 33901-79) . . .$18.69 

17902 Fits 4-speed FL models with ratchet top from 

1965-early 1978 (repl. OEM 71507-65) . . . . . . .$19.04 

17901 Fits 4-speed FX models with ratchet top from 

1971-early 1973 (repl. OEM 71507-71) . . . . . . .$16.04 

54132 Fiber gasket for models from 1936 thru 1979 

(repl. OEM 25811-11) pack of 10 . . . . . . . . . . . . . .$4.29 

54130 Nylon gasket for models from 1980 to present 

(repl. OEM 33043-80) pack of 10 . . . . . . . . . . . . . .$3.99 

658444 Fits 5-speed Twin Cam 88 ® Softail ® models 

from 2000 to present and Dyna Glide models 

from 2001 to present (repl OEM 33904-00) . . . .$9.99 

658445 Fits Softail ® models from 1998 thru 1999 and 

Touring and Dyna Glide models from 1999 

thru 2000 (repl. OEM 33902-98) . . . . . . . . . . . . . .$9.04 

‘VOES’ Switches 

These are Original Equipment parts. Replacement 

vacuum operated electric switch. 

75295 Fits Softail ® , FXR and Dyna Glide 


(repl. OEM 26566-91) . . . . . . . . . . .$78.24 

75294 Fits Softail ® and 4-speed FX models 

from 1984 thru 1990 and Sportster ® 


(repl. OEM 26558-84) . . . . . . . . . . .$62.99 


and Sportster ® models from 1983 thru 

1985 (repl. OEM 26557-83) . . . . . .$73.99 

Micro Starter Relay with Diode 

by Standard Motor Products 

A replacement for the Original Equipment 

micro-sized unit fitted to all Big Twins from 

2000 to present. Sold each. . . . . . . . . . . . . .$6.64 


Premium ® Circuit Breakers 

American-made replacement circuit breakers 

for most models. 

25200 30 amp. Fits FL models from 1970 

thru 1972 with mounting bracket 

(repl. OEM 74586-70) . . . . . . . . . . . .$10.99 

25201 30 amp. (repl. OEM 74559-77) . . . .$10.99 

25202 15 amp. (repl. OEM 74589-73) . . . .$10.99 

19295 Mounting clip (card of 10) . . . .$1.62 ea. 


Dual Post 

Circuit Breakers 

Universal circuit breaker features 

integral mounting bracket and 

dual #10-32 posts. Bracket holes 

are 3/16" in diameter. Made in 

the USA. Sold each. . . . . . . . .$10.99 

17746 15 amp 

17747 30 amp 

Universal Switch Plates 

Sold on a card of 12. . . .$0.36 each 

12943 Single mount hole 

15103 Key switch bracket 

15103 

12943 

Goodridge 

Brake Light Switch 

Hydraulic switch features wire 

leads for your stoplight. Fits most 

Big Twin and Sportster ® models. 

Ideal for many applications (7/8" 

hex with 1/8" NPT thread) . . .$10.49 


6.49 

Apparel 

Bike Kits 

& Trailers 

Seats 

& Bags 

Foot 

Controls 

Hand 

Controls 

Lighting 


Exhaust 

Intake 

Engine 

Gaskets 

Tranny 

& Clutch 

Driveline 

Wheels, 

Tires 

& Brakes 

Frames 

Forks 

& Shocks 

Sheetmetal 

General 

Cross 

Reference


6 

Ignition Switches & Covers 

Side Hinge Ignition Switch 

Chrome side hinge ignition switch with barrel 

style key. Fits FXDWG 1993 to present; Softail ® 

models 1996 to present; and Road King ® models 

1994 to present. Includes two keys. . . . . . .$68.24 

17717 Replaces OEMs 71501-93 and 71313-96 

Custom Ignition Switch 

Made of durable plastic which makes it waterproof. 

Features off, run and spring return start 

with push button feature. Can be used without 

a starter relay. Made in USA. . . . . . . . . . . . .$49.99 

12203 12-volts 

6.50 

25535 

25538 

Convertible Ignition Switch 

6-post ignition switch and lock assembly 

complete with both styles of caps. . . . . . . .$41.04 

25535 Ignition switch (repl. OEM 71500-36TA) 

Replacement Ignition Switch Cap 

Late die-cast style. Pack of 10. . . . . . . . . . . . .$51.39 

25538 Includes pins 

Covers for Dash-Mounted Ignition Switches 

Top off your dash with a custom ignition switch cover. Available to match Custom Chrome’s Inferno ® 

designs, plus a classic ‘Skull’ style. Fit all 1984 thru 1995 Softail ® models and all FL-style, dash-mounted 

ignition switches from 1936 thru 1986 with top-hinged cover, or for the side-hinge ignition switch 

found on the most recent models. 

Side-Hinge 

27615 Inferno ® . . . . .$16.49 

27924 Skull . . . . . . . . .$18.59 

Heavy-Duty Electronic 

Ignition Switch 

Totally electronic switching eliminates the troublesome 

pole-to-bar contacts of Original Equipment 

switches. The 6-pole terminal pattern is 

highly-resistant to vibration and corrosion. 

Includes two reversible keys and both the early 

and late-style ignition switch caps. . . . . . . .$42.79 

26455 Fits all models from 1936 thru 1995 

(except Dyna Wide Glide ® models) 

Chrome Ignition Switches 

Fits Sportster ® models 1975 thru 1977 

and FX models 1973 thru 1977. 

12251 Ignition switch 

(repl. OEM 70124-75) . . . .$26.79 

Fits FX models from 1978 thru 1985, 

Sportster ® models from 1978 thru 1993 

and FXR models from 1982 thru 1993. 


(repl. OEM 71425-77T) . . .$26.79 

25596 Replacement key blank 

(sold each) . . . . . . . . . . . . . . .$4.19 


Top-Hinge 

27656 Inferno ® . . . . .$17.49 

27925 Skull . . . . . . . . .$15.49 

Heavy-Duty Ignition Switch 

A top-quality, heavy-duty ignition switch for all 

Softail ® , FXWG and FL models from 1973 thru 

1995 (except Dyna Wide Glide ® models). Also 

compatible with all of our custom dash covers. 


(repl. OEM 71501-73T) . . . . . . . . . .$35.39 

25597 Replacement key blank 

(sold each) . . . . . . . . . . . . . . . . . . . . . .$4.19 

Three-Way Universal 

Ignition Switch 

12289 Popular as an OEM 

replacement . . . . . . . .$10.99

26440 

Chrome Replacement Stop Light Switches 

Stamped steel construction and heavy-gauge support plates. 

Ideal for replacing worn stock parts during a restoration 

project or when building a ground-up full custom. 

26447 Fits FX, FXE and FXS models 1973 thru 1977 

(repl. OEM 72005-73A) push-off style . . . . . . . .$17.04 

26448 Fits Sportster ® models 1975 thru 1976 

(repl. OEM 72004-75) pull-on style . . . . . . . . . . .$11.54 

26435 Fits Big Twin models 1937 thru 1957, 45" WL models 

1937 thru 1957 and Servicars 1937 thru 1950 

(repl. OEM 72003-34T) pull-on style . . . . . . . . . .$20.24 

26440 Fits Sportster ® models 1967 thru 1974 

(repl. OEM 72004-70T) push-off style . . . . . . . .$16.99 

26429 Fits Sportster ® and K models 1952 thru 1966 

(repl. OEM 72004-52) push-off style . . . . . . . . . .$11.24 

10042 

11699 

26447 

26435 

10041 

12422 

26448 

Chrome Cable Ties 

These cable ties feature specially-processed 

chrome-plating to resist cracking, and are ideal 

to dress up any wiring job. Sold in packs of 5. 

85090 140mm (51/2"-long) . . . . . . . . . . . . . . .$13.19 

85091 160mm (61/4"-long) . . . . . . . . . . . . . . .$13.79 

12422 180mm (7"-long) . . . . . . . . . . . . . . . . . .$9.49 

11699 280mm (11"-long) . . . . . . . . . . . . . . . .$12.49 

85095 300mm (113/4"-long) . . . . . . . . . . . . . .$16.29 

26429 

Handlebar Light Switch 

Mounts to any 1" handlebar. 

Duplicates original-style, inside 

handlebar-wired switch 

perfectly. . . . . . . . . . . . . . . . . . . .$11.24 


Handlebar Button 

Switch 

Mounts to any 1" handlebar. 

Two-wire style, and designed to 

run wires through the handlebar 

for horn or starter. . . . . . . . . . .$15.99 

25533 Replaces OEM 71800-26TA 

Heavy-Duty Cable Ties 

These heavy-duty black cable ties are made of 

NYLON 6 which has a tensile strength of 50 lbs. 

and is heat-resistant to above 200° F. 

11650 4"-long (pack of 15) . . . . . . . . . . . . .$6.49 

11658 8"-long (pack of 15) . . . . . . . . . . . . .$7.99 

12404 12"-long (pack of 50) . . . . . . . . . . .$18.49 

Chrome Handlebar 

Wiring Clips 

Exact duplicates of the 

Original Equipment nylon 

pieces installed on the handlebars 

of late model bikes. They 

feature a specially-processed 

chrome-plating which is 

durable and resists cracking. 

Sold in packs of 4. 

10041 3/8"-I.D. (repl. OEM 

56073-83) . . . . . . .$7.99 

10042 1/2"-I.D. (repl. OEM 

70345-84) . . . . . . .$7.99 

Brake Light Switch 

Banjo Bolt by 

Goodridge 

Banjo bolt with pressure switch 

built into it. Simplifies the rear 

brake by eliminating the tee and 

pressure switch and creating a single 

brake line system. Sold Each 

14137 3/8"-24 thread . . . . .$18.99 

14138 7/16"-24 thread . . . .$17.79 


Switches 

49211 

49212 

Late Style Ignition Switch 

Assemblies 

Switch assemblies feature round tumbler style 

keys for added security and simple hook-ups. 

Retro-fit kit fits Sportster ® models from 1975 

thru 2003, FXR models from 1982 thru 1999, 

Dyna Glide models (except FXDWG) from 

1991 thru 2003, and FX models from 1973 

thru 2003 (except FXWG and FXST) as well 

as custom applications. . . . . . . . . . . . . . . . . . .$32.84 

49211 Replaces OEM 71428-90B 

Replacement for Dyna Glide models (except 

FXDWG) from 1991 to 1993 as well as many 

custom applications. . . . . . . . . . . . . . . . . . . . . .$32.84 

49212 Replaces OEM 71421-90 

Universal 1" Handlebar 

Combination Switch 

High-lo beam switch with kill or horn button. 

25991 Chrome . . . . . . . . . . . . . . . . . . . . . . . .$14.19 

Universal Stop Light Switch 

Sold on a display card of 10, or individually. 

12287 Sold each . . . . . . . . . . . . . . . . . . . . . . .$4.84 

12288 Card of 10 . . . . . . . . . . . . . . . . . . . . .$44.59 

Doss Switch 

Mount Housing 

This ignition key switch housing is 

intended to be welded to your 

frame. . . . . . . . . . . . . . . . . . . . . . .$46.59 

62344 Fits custom applications 

Note: Must use CC #12286 ignition switch. 

6.51 

Apparel 

Bike Kits 

& Trailers 

Seats 

& Bags 

Foot 

Controls 

Hand 

Controls 

Lighting 


Exhaust 

Intake 

Engine 

Gaskets 

Tranny 

& Clutch 

Driveline 

Wheels, 

Tires 

& Brakes 

Frames 

Forks 

& Shocks 

Sheetmetal 

General 

Cross 

Reference


6 

Misc. Electrical Components 

‘Battistini’ Start Button 

• Machined from stainless steel with flat design 

• Incorporates electrical switch and mounts flush to any flat surface 

648301 Sold each . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$44.95 

Neutral Switch Cover 

by KüryAkyn 

Hide the neutral switch and connector 

with this chrome-plated 

custom cover. Fits the switch in the 

transmission top cover. . . . . .$16.95 

48228 Fits all 5-speed Big Twins 


Open Barrel Terminal 

Crimper 

Easily crimps new-style terminals 

introduced on 1996 models. . .$21.49 


6.52 

Chrome Oil Pressure 

Sender Cover Kit 

by KüryAkyn ® 

This rubber-lined, easily-installed, 

die-cast cover kit fits all Evolution ® 

Big Twins from 1984 thru 1999 

(except models equipped with 

2-terminal sending units). . . .$29.99 

48265 Sender cover kit 

Custom Chrome ® Stainless 

Steel Push Buttons 

Very small solution of push buttons 

made of stainless steel to use in 

conjunction with 1" handlebars. Two 

versions are available, one with two 

electronic cables and another one with 

one electronic cable (needs minus over 

the housing). Easy connecting with 

horn, starter or lighting relays. 

686000 2-wire switch . . . . . . . . .$57.29 

686001 1-wire switch . . . . . . . . .$74.39 

Doss Oil Pressure 

Switch Cover 

Cover the plain-looking stock 

switch with our distinctive ribbed 

Rick Doss design. . . . . . . . . . . .$28.29 

46328 Fits Evolution ® Big Twin 

models 1984 thru 2003 

with indicator lights 

Accel ® 300+ 

Perma Crimp 

Used for crimping the ends 

on ignition wires. Features 

a precision ratcheting 

action for application of 

the perfect amount of 

force. Fully adjustable with 

3 sets of replaceable 

crimping jaws for various 

crimping tasks. . . . . .$70.94 


26682 

28908 

‘Bad Ass’ Oil Pressure Sender Covers 

Clean up your unsightly oil pressure sending unit with one of 

these chrome steel covers. . . . . . . . . . . . . . . . . . . . . . . . . . . . .$39.99 

28908 Fits Evolution ® Big Twin engines (except models 

with side-mount senders) 

28858 Fits Twin Cam 88 ® engines (except models with oil 

pressure gauges) 


26681 

28858 

Neutral Switch Filler 

by Paul Yaffe Originals 

Fills the neutral switch hole when 

the switch is removed. Made of 

303 stainless steel and then given 

a highly polished finish. . . . .$32.99 

47692 Fits all 5-speed Big Twins 


Wiring Harness Pins 

and Sockets 

Replacements for the 

Original Equipment parts in 

many applications since 

1971. Packs of 10. 

26681 Pins (repl. OEM 

72039-71) . . . .$3.29 

26682 Sockets (repl. OEM 

72038-71) . . . .$3.29

Dual Trumpet Air Horns 

by Howard’s Hog Horns 

• These are the loudest dual air horns on the market 

providing 140+ db of sound 

• The chrome-plated trumpets are operated by a 

high tech rotary vane compressor that is small 

enough to fit inside your stock horn cover 

• Air induction system works off single manifold and uses only one hose for increased 

air volume 

• Only air horns on the market with removable back (sound unit) for cleaning and 

maintenance. If dirt gets inside your horn it will prevent the diaphragm from vibrating 

and interfere with the sound 

• Howard’s Hog trumpet horn is all metal... no plastic 

• Will not fit Touring models with fairing lowers 

617670 Fits carbureted Evolution ® Big Twins from 1993 thru 1999 . . . . . . . . . . . . . . .$165.00 

617671 Fits fuel injected Evolution ® Big Twins from 1993 thru 1999 . . . . . . . . . . . . . .$165.00 

617672 Fits 1999-up carbureted Twin Cam 88 ® models . . . . . . . . . . . . . . . . . . . . . . . . . . .$165.00 

617673 Fits 1999-up fuel injected Twin Cam 88 ® models . . . . . . . . . . . . . . . . . . . . . . . . .$165.00 

Chrome Horn Covers 

Set it off in style and add a custom touch to your bike with these creative 

horn covers. Available in 4 designs: iron cross, flames, skull and flaming 

skull. Sold each. Fits most models with vertical motor mount horn from 

1991 to present. 

609990 Iron cross . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$99.99 

609991 Flames . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$99.99 

609992 Skull . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$99.99 

609993 Flaming skull . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$99.99 

Note: Requires horn bracket (OEM 69120-91) 


Horns 

Chrome Trumpet Horn Kit 

for Softail ® Models 

Unlike any of the other kits on the market, this chrome trumpet 

horn kit was specifically designed to meet the demand 

for a horn that fits Softail ® models. This show-chromed kit 

doesn’t require you to change your stock air cleaner or 

exhaust system and is just what you’ll need to achieve that 

‘nostalgic’ look. Complete with detailed instructions. 

28229 Fits all Softail ® models (except 1992 and later 

California models with the stock air box) 

from 1984 thru 1999 . . . . . . . . . . . . . . . . . . . . . .$127.99 

28227 Replacement stud kit . . . . . . . . . . . . . . . . . . . . . . . .$7.69 

Chrome Mini Horn 

Small chrome-plated two terminal horn packs a powerful 

sound and measures 21/2" in 

diameter. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$4.99 


6.53 

Apparel 

Bike Kits 

& Trailers 

Seats 

& Bags 

Foot 

Controls 

Hand 

Controls 

Lighting 


Exhaust 

Intake 

Engine 

Gaskets 

Tranny 

& Clutch 

Driveline 

Wheels, 

Tires 

& Brakes 

Frames 

Forks 

& Shocks 

Sheetmetal 

General 

Cross 

Reference


6 

Horns 

Doss Horn Kits 

In minutes, upgrade your standard-style horn to the custom 

look of these Rick Doss-designed, complete horn and cover 

combinations. Replace your standard-style horn for a custom 

look, or use in addition with your existing horn for an extra 

margin of safety. High-impact, chrome-plated, ABS plastic 

cover with universal fitment, 12 volt, 31/2" diameter horn. 

46394 Single Wing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$44.99 

Chrome Bulb Horn 

An oldie, but a goodie. For the rider who has to have all the 

gadgets. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$7.49 

12944 7"-long 

Universal Horn with Cover 

This 12-volt horn features a universal mounting bracket and a 

removable chrome-plated, injection-molded cover. It may be 

used for a variety of applications and has spade-type terminals. 

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$32.49 


6.54 

Custom Horn 

Excellent for use on custom bikes 

or as a stock replacement. 

Universal mounting bracket is 

included. 4"-diameter. 

350133 12 volt . . . . . . . . . . . . .$15.59 

Custom Horn Cover 


Cover snaps over stock horn on XLH 883 models 

from 1986 thru 1993 and XR 1000 models 

from 1983 thru 1984. . . . . . . . . . . . . . . . . . . . . .$9.19 



Deluxe Chrome Horn with 

Adjustable Mount 

Two terminal horn comes equipped with a universal 

adjustable mounting bracket. . . . . .$10.99 


Chrome Billet Horn 

by Badlands 

Complements the engine fins and includes a 

Signaltone horn and all hardware. Bolt-on for 

all Softail ® and 4-speed FX or FL models with 

solid engine mounts. . . . . . . . . . . . . . . . . . . . .$129.95 

36925 Complete kit

Universal 12-Volt Horn 

Horn with universal mounting 

bracket. Fits most Sportster ® models 

from 1983 thru 2003. . . . .$19.74 

28315 Replaces OEMs 69043-91 

and 69043-83A 

Chrome Mini Horn 

Chrome-plated 12-volt custom 

horn is only 21/2" (6.5cm) in 

diameter, making it the smallest 

horn on the market. 

84875 Sold each . . . . .Call for price 

Twin Electric Horns 

High decibel (115dB) chrome horn set. Includes relay, 

universal brackets and hardware. Ideal for motorcycles 

where space is limited. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$34.99 

12528 Horn set 

‘Speedline’ Transmission Mount Horn 

Bracket by Rick Doss 

Chrome billet bracket works with 5 and 6-speed transmissions. 

Tucks your horn away onto the right side of bike. For 

use on custom bikes and rigid frames only. . . . . . . . . . .$24.89 


KüryAkyn V-Shield Horn Cover 

Easily replace the dull factory cover with a 

design that really compliments the angles of 

the V-Twin motor. . . . . . . . . . . . . . . . . . .$69.95 

48235 Fits models with the horn between 

the cylinders from 1992 thru 2003 

Classic Bell Horn Cover 

Elegant and well rounded, this classic shape 

is better looking and easier to clean than 

the typical louvered horn cover. Fits 

Sportster ® and Big Twin models from 1991 

thru 2003. . . . . . . . . . . . . . . . . . . . . . . . . . .$25.95 


Horns & Horn Covers 


Electric Horn 

Early-style 12-volt electric horn with chrome 

grill. This heavy-duty, top-quality horn has a 

universal mount and can be used in many 

applications. 

28120 Horn and grill . . . . . . . . . . . . . . . . . . .$64.69 

28151 

28152 

28150 

Horn Covers 

Chrome-plated replacement horn covers. 

Fits low note horns on Sportster ® models 1976 

thru 1985, and FX models from 1976 thru 1980. 

28150 Replaces OEM 69140-76T . . . . . . .$15.49 

Fits high note horns on Big Twins from late 1976 

thru 1990, and 1976 thru 1985 Sportster ® models 

28151 Replaces OEM 69017-76T . . . . . . .$15.49 

Fits the high note horns on all models from 

1970-early 1976. 

28152 Replaces OEM 69141-70T . . . . . . .$16.59 

Fits Sportster ® models from 1986 thru 1992 and 

Softail ® or FLT models from 1991 thru 1992. 


(not shown) . . . . . . . . . . . . . . . . . . . .$20.24 

Fits Sportster ® models from 1993 thru 1994 and 

Softail ® or FLT models from 1993 thru 2003. 

28154 Replaces OEM 69012-93 

(not shown) . . . . . . . . . . . . . . . . . . . .$24.89 

6.55 

Apparel 

Bike Kits 

& Trailers 

Seats 

& Bags 

Foot 

Controls 

Hand 

Controls 

Lighting 


Exhaust 

Intake 

Engine 

Gaskets 

Tranny 

& Clutch 

Driveline 

Wheels, 

Tires 

& Brakes 

Frames 

Forks 

& Shocks 

Sheetmetal 

General 

Cross 

Reference


6 

Yuasa Batteries 

YUASA ® Batteries 

Yuasa ® has been manufacturing motorcycle batteries in the USA since 1979 

and is the largest manufacturer of motorcycle batteries in the USA. 

All Yuasa ® batteries feature the following: 

• Patented sealed post and heat-sealed case to cover prevent acid seepage, reduce 

corrosion and give the battery extra strength. 

• Polypropylene cover and container assure reserve electrolyte capacity for cooler 

operating temperatures and gives greater resistance to gas, oil and impact in 

extreme weather conditions. 

• Thru-partition construction provides shorter current path with less resistance 

than 'over the partition' construction, giving more cranking power. 

• Special grid design withstands severe vibration, assuring maximum conductivity. 

High Performance Maintenance Free Batteries 

• Up to 30% more cranking power than YuMicron thanks to radial grid 

design and additional plates 

• Lasts up to three times longer than conventional batteries 

• Plus all the outstanding features of a maintenance free battery! 

Maintenance Free Batteries 

• Sealed Valve Regulated Lead Acid battery never needs refilling 

• Absorbed Glass Mat (AGM) technology eliminates water loss 

• Spill-proof design means virtually no possibility of leaks 

• Advanced lead-calcium technology pumps up starting power 

• Holds voltage longer and needs less charging when battery is in standby or 

storage conditions 

•Shipped dry with high gravity electrolyte (except CC #2831647, which is factory 

sealed and charged) 

6.56 


YuMicron CX Batteries 

• YuMicron CX was the first small engine battery to use "lead calcium" technology. 

• 5% to 8% more cold cranking amps than YuMicron battery. 

• Reduces water loss to about one-eighth that of lead-antimony batteries. 

YuMicron Batteries 

• High technology separators allow two extra plates per cell for a 30% 

improvement in cranking performance over a conventional battery. 

Conventional Batteries 

• These workhorse batteries are designed specifically for applications requiring 

operation on uneven surfaces and vibrating environments.

Big Boar & Odyssey ® Batteries 

BIG BOAR Batteries 

Big Boar Products introduced dry cell battery technology to the V-Twin industry 

11 year ago and the users of their batteries have enjoyed one of the 

lowest failure rates in the industry. 

• Big Boar 350 series batteries supply a conservatively ranked 350 cold 

cranking amps (by far the most powerful battery its size). It has the 

power to spin today’s big inch, high compression motors without a 

whimper. Even bikes with 131 cu in. engines and 10 to 1 compression 

ratios will turn over with ease. 

• The total seal – total safe maintenance free design prevents 

chrome or paint damage from leaking acid. 

• Heavy internal connectors, heavy-duty separators, heavy-duty terminals 

and more lead plates make this the baddest battery on the 

block. More lead plates than competition = more CCA’s. 

• Custom builders who require more capacity from their batteries 

can rest assured either the BB1000 (with 650 cca’s) or the BB450-B 

(with 750 cca’s) can fulfill most power requirements. 

• As custom frame builders constantly find the need for smaller batteries, 

the BB312 fills this niche without a hitch and is multi positional 

and vibration resistant. 

• The BB312 is not recommended for large displacement engines 

with high compression and the battery warranty will be void 

unless it is used with a charging device such as Battery Tender 

brand chargers. 

• All Big Boar batteries are made in the USA and feature a full 1year 

replacement guarantee. (BB1000 carries a 2-year replacement 

guarantee). 

ODYSSEY ® Drycell‘ Batteries 

ODYSSEY batteries are 12-year design-life military-grade batteries that provide a 

service life 3 times longer than most other battery brands and are mechanically 

indestructible against vibration and heat. 

• 2-year full warranty. 

• Up to 60% more cranking power for the first 5 seconds over competitive 

batteries. 

• No acid to add . 

• Drycell technology is non-hazardous and non-spillable for air shipment. 

• Military-grade and metal jacket provide resistance to vibration, heat 

and heavy-use. 

• True deep cycle performance for long life under heavy discharge and 

recharge operation. 

• Typical service life is 6-10 years when kept at or near full charge. 

• Can be mounted and operated in any position. 

• True, maintenance-free brass terminals and stainless steel hardware. 

• Shipped charged and ready to use if voltage is 12.65 volts or greater. 

• Two-year shelf-life: recharge when battery reads 12.2 volts or after 

two years to return to service. 

• Requires minimum 5 amps (10 amps preferred) to charge these batteries 

with charging voltage not to exceed 15.0 volts. 

• High-performance V-Twin applications require independent charger 

for full recharging and longer battery life. 

• Made in USA. 


6.57 

Apparel 

Bike Kits 

& Trailers 

Seats 

& Bags 

Foot 

Controls 

Hand 

Controls 

Lighting 


Exhaust 

Intake 

Engine 

Gaskets 

Tranny 

& Clutch 

Driveline 

Wheels, 

Tires 

& Brakes 

Frames 

Forks 

& Shocks 

Sheetmetal 

General 

Cross 

Reference


6 

Battery Applications 

6.58 

Yuasa ® Big Boar Odyssey ® (10) 

Maintenance 

High 

Performance 

Maintenance Maintenance 

Models Application Conventional Yumicron Yumicron CX Free Free Free Drycell ® 

Softail ® 1997 to Present — — — 2831560 (8) 2831668 (8) 618892 59860 (1) 

Models $76.50 $82.95 $169.99 $145.76 

1991 thru 1996 — — 2831391 2831560 (8)(9) 2831668 (8)(9) 618892 (9) 59860 (1) 

$61.50 $76.50 $82.95 $169.99 $145.76 

1984 thru 1990 — 2831371 2831465 2831565 (8) 2831667 (8) 618893 59860 (1) 

$50.51 $61.50 $76.50 $82.95 $169.99 $145.76 

FL, FLH & 2000 to Present — — — 2831647 — 18896 (5) 659863 

FLT Series $95.50 $255.59 $175.99 

1997 thru 1999 — 2831596 — 2831647 — 18896 (5) 659863 

$78.95 $95.50 $255.59 $175.99 

1980 thru 1996 — — 2831468 — 2831669 (8) 618892 (2) 59862 

5-speed models $66.50 $92.50 $169.99 $150.08 

1965 thru 1984 — 2831443 — — — 18895 (4) — 

4-speed models $57.85 $179.99 

XL Series 2004 to Present — — — 2831682 — — — 

XL Series $71.95 

1997 to 2003 — — — 2831560 (8) 2831668 (8) 618892 59861 

XL Series $76.50 $82.95 $169.99 $127.41 

1979 thru 1996 — 2831371 2831391 2831565 (8) 2831667 (8) 618893 59864 

XL Series and XR1000 $50.51 $61.50 $76.50 $82.95 $169.99 $126.30 

1970 thru 1978 2831179 2831281 — — — — — 

XLCH Series $33.58 $42.95 

1967 thru 1978 XLH — 2831443 — — — 18895 (4) — 

$57.85 $179.99 

FXR All models — 2831371 2831465 2831565 (8) 2831667 (8) 618893 59864 

$50.51 $61.50 $76.50 $82.95 $169.99 $126.30 

FXD Series 1997 to Present — — — 2831560 (8) 2831668 (8) 618892 59860 

$76.50 $82.95 $169.99 $145.76 

1991 thru 1996 — — 2831391 2831560 (8)(9) 2831668 (9) 618892 (9) 59860 

$61.50 $76.50 $82.95 $169.99 $145.76 

FX Series 1971 thru 1986 — 2831371 2831465 2831565 (8) 2831667 (8) 618893 59864 

electric start models $50.51 $61.50 $76.50 $82.95 $169.99 $126.30 

1971 thru 1972 2831179 2831281 — — — — — 

kick start models $33.58 $42.95 

VRSC 2002 to Present — — — 2831489 (8) — — — 

VRSC models $71.95 

MT, SS, SX, MT500 2831172 2831363 — — 2831665 (8) — — 

TX & Z $34.50 $41.02 $64.50 

Models SS350 2831123 — — — — — — 

SS (except SS350), 

$31.57 

2831172 2831289 — — — — — 

SX, TX and Z models $34.50 $48.50 

Buell ® X1, S3, S3T & M2 — — — 2831560 (8) 2831668 (8) 618892 59860 

Models $76.50 $82.95 $169.99 $145.76 

S2, S2T, RR1200, RS1200, — — 2831465 2831565 (8) 2831667 (8) 618893 59860 

RSS1200 and RR1000 $61.50 $76.50 $82.95 $169.99 $145.76 

S1 — — — 2831489 (6)(8) — — 59860 (3) 

$71.95 $145.76 

2000 to Present XB9R, — — — 2831489 (8) — — — 

XB9S, XB12R, XB12S 

and Blast 

$71.95 

® models 

Custom Custom Applications — — — — — 18894 (7) — 

with limited space $140.19 

(1) Requires hold-down strap for proper fitment (CC #26034) 

(2) Part is smaller than OEM battery. 

(3) Shim pad required on lower battery tray. 

(4) Terminals extend above battery casing and may require cutting of battery box cover for 

proper installation. 

(5) Battery mounts on its side and cables must be rerouted. 


(6) Must use adapter kit available from Buell®. 

(7) Battery Tender or similar type auto-cutoff battery charger must be used with this 

product or warranty is void. 

(8) Ground Freight Only 

(9) May require use of cover/spacer kit (CC #2831629) 

(10) When charging Odyssey batteries CC #15285 (on page 6.66) should be used.

YUASA ® 

BIG BOAR 

ODYSSEY ® 

– + – + – 

– + – + – 

– + 

+ – – + – 

Batteries Specifications & Hardware 

+ – 

+ – – + 

Bike Kits 

& Trailers 

Seats 

& Bags 

Foot 

Controls 

Hand 

Controls 

Lighting 


Exhaust 

Intake 

Engine 

Gaskets 

Tranny 

& Clutch 

Driveline 

Wheels, 

Tires 

& Brakes 

Custom Hold 

Down Strap for 

Odyssey Battery 

Special length rubber strap 

fits Softail 


6.59 

Frames 

Forks 

& Shocks 

Sheetmetal 

General 

Cross 

Reference 

® PART # BATTERY TYPE OEM NUMBER CAPACITY C.C.A. DIMENSIONS CONFIGURATION ACID 

AH (10H-R) @ 0°F INCHES WEIGHT VOLUME 

(-18°C) (± 1/16 IN) (LBS)* (oz) 

L W H 

YUASA 

Replacement 

Battery Hardware 

Special lead coated hardware 

resists acid corrosion 

and rust. 

models when 

2831635 14mm nut 

using CC #59860 Odyssey 

and bolt 

battery. Can also be used 

set . . . . . .$0.56 for custom battery 

2831636 12mm nut, bolt applications. . . . . . .$12.49 

and spacer 

25034 71/4" long (each) 

set . . . . . .$1.01 

® 

Conventional 

2831172 

2831179 

2831443 

$34.50 

$33.58 

$57.85 

12N7-3B 

12N7-4A 

YHD-12 66007-84 

7 

7 

25 

74 

74 

240 

5 5/16 

5 5/16 

8 1/8 

3 

3 

5 1/4 

5 1/4 

5 1/4 

6 1/2 

4.9 

4.9 

13.3 

16.9 

16.9 

74.4 

2831123 

Yumicron 

2831281 

2831289 

2831363 

2831371 

2831596 

$31.57 

$42.95 

$48.50 

$41.02 

$50.51 

$78.95 

6N11A-1B 

YB7-A 

YB7L-B 

YB14L-A2 

YB16-B 

YB30L-B 

66006-29F 

66006-70 

11 

8 

8 

14 

19 

30 

— 

124 

124 

190 

240 

300 

4 13/16 

5 5/16 

5 5/16 

5 5/16 

6 7/8 

6 5/8 

2 7/16 

3 

3 

3 1/2 

4 

5 3/16 

5 1/8 

5 1/4 

5 1/4 

6 9/16 

6 1/8 

6 15/16 

3.5 

5.1 

5.1 

7.6 

10.5 

14.1 

13.5 

20.3 

20.3 

30.4 

40.6 

57.5 

Yumicron CX 

2831465 

2831391 

2831468 

Maintenance Free 

2831647 (1) 

2831560 (1) 

2831565 (1) 

2831489 (1) 

2831682 (1) 

$61.50 

$61.50 

$66.50 

$95.50 

$76.50 

$76.50 

$71.95 

$71.95 

YB16-B-CX 

YB16HL-A-CX 

Y50-N18L-A-CX 

YIX30L 66010-97A 

YTX20L-BS 65989-97A, 65989-90B 

YTX20-BS 65991-82B, 65991-75C 

YTX14-BS 65948-00 

YTX14L-BS 65958-04 

19 

19 

20 

30 

18 

18 

12 

12 

255 

255 

275 

385 

270 

270 

200 

200 

6 7/8 

6 7/8 

8 1/8 

6 9/16 

6 7/8 

6 7/8 

6 

6 

4 

4 

3 9/16 

5 

3 7/16 

3 7/16 

3 7/16 

3 7/16 

6 1/8 

6 1/8 

6 7/16 

6 7/8 

6 1/8 

6 1/8 

5 3/4 

5 3/4 

10.5 

10.5 

11.2 

22 

11.2 

11.2 

8.1 

8 

40.6 

40.6 

47.3 

N/A 

31.4 

31.4 

23.3 

23.3 

High Performance Maintenance Free 

2831669 (1) $92.50 YTX24HL-BS 66010-82B 21 350 8 1/8 3 7/16 6 3/8 14.4 33.5 

2831668 (1) 

2831667 (1) 

$82.95 

$82.95 

YTX20HL-BS 

YTX20H-BS 

18 

18 

310 

310 

6 7/8 

6 7/8 

3 7/16 

3 7/16 

6 1/8 

6 1/8 

12.4 

12.4 

31.4 

31.4 

2831665 (1) $64.50 YTX14AHL-BS 12 210 5 5/16 3 1/2 6 9/16 7.7 23.3 

*Except YIX30L,Yuasa weights shown w/o acid 

(1) Ground freight only. 

BIG BOAR 

618892 $169.99 BB350 20 350 

618893 $169.99 BB350-RP 20 350 

18894 (1) $140.19 BB312 12 250 

18895 $179.99 BB450-B 26 750 

18896 $255.59 BB1000 33 450 

(1) Battery Tender or similar type auto-cutoff battery charger must be used with this product or warranty is void. 

ODYSSEY 

6 7/8 

6 7/8 

5 7/8 

7 3/4 

6 9/16 

3 5/16 

3 5/16 

4 1/8 

6 1/2 

5 

6 1/16 

6 1/16 

5 

5 1/8 

6 7/8 

16 

16 

11 

27 

24 

N/A 

N/A 

N/A 

N/A 

N/A 

® 

– + – + – 

– + – + – + – 

+ – 

+ – + – + – 

– + – 

+ 

– 

+ – 

+ 

– 

+ 

– 

– 

– 

+ – 

+ 

– 

+ – 

+ + – 

+ – 

+ 

– 

+ 

+ 

+ 

– 

+ – 

– + – 

– + – 

+ 

+ – 

+ 

– 

+ 

– 

+ 

– + – 

– 

– 

– + – 

– 

– 

– + – 

+ 

– + – 

– 

– + 

– 

+ – 

+ – 

+ – 

– 

+ 

– 

+ 

– 

+ – 

+ 

+ 

+ – 

+ 

+ 

+ 

+ 

– + 

– 

+ 

– 

+ 

+ – 

– 

+ 

– 

+ – 

+ 

– 

+ 

– 

+ 

– 

+ – 

– 

+ – 

– 

+ 

– 

– + 

+ – 

– 

+ 

– + 

+ – 

+ 

– 

– 

+ 

– 

+ 

– + 

– 

– 

+ – 

– 

+ – 

+ 

+ – 

+ 

+ – 

+ – 

+ – 

+ 

– – 

+ – 

+ – 

+ – 

+ 

+ + 

– 

– + – + 

+ – 

+ – + 

+ 

+ – 

– 

+ – + 

– 

+ 

– + – + 

– + – 

– 

+ – 

+ – 

+ – + – 

– + 

– 

+ – + 

+ 

– + – 

59864 $126.30 PC 535 13 200 

59861 $127.41 PC 545 12 170 

59860 $145.76 PC 545MJ 12 170 

59862 $150.08 PC 680MJ 16 210 

659863 $175.99 PC 925LMJ 27 360 

Note: When charging Odyssey batteries CC #15285 (on page 6.66) should be used. 

6 11/16 

7 

7 

7 1/4 

6 5/8 

3 7/8 

3 3/8 

3 3/8 

3 1/8 

7 1/16 

6 1/8 

5 3/16 

5 3/16 

6 11/16 

5 1/16 

– + 

+ – + 

– 

+ – – + + – 

+ + 

+ – + – 

+ + – 

+ – + + – 

+ 

+ 

+ – 

+ – 

– + + – 

+ + 

+ – 

+ – + 

– 

+ – 

+ 

– 

+ 

+ 

+ – 

– + – 

+ – 

+ – + 

+ – 

– 

+ – 

+ + 

– 

+ – + 

+ 

– 

– 

– + 

+ + 

– 

+ – 

+ + 

– 

– 

+ + – 

+ + – 

+ – + 

– 

+ – 

+ – 

+ – 

+ 

– + 

+ – 

– + – 

– – 

– + – 

+ – – 

+ – 

+ – 

– 

– + – 

– 

+ – 

+ – 

+ – 

– 

– 

+ – 

+ 

– 

+ – 

+ 

– 

+ – 

– 

+ – 

+ – 

+ – 

+ – 

+ 

– 

– 

– + 

+ 

– 

+ – + – 

– – 

+ – 

– – 

– + 

+ – 

– – + – 

+ – – 

+ – + – 

+ – 

12 

12 

12 

15.4 

26 

N/A 

N/A 

N/A 

N/A 

N/A 

Battery Terminal Cover + – 

+ 

– Kit – + – 

– + 

+ – 

Includes spacers and terminal + – 

+ 

– covers. – + – 

+ 

2831629 Sold each . . . . . . . . . . + – + 

+ . . . . . . – 

. . . . . . . . . . . . . . . . . .$4.55 

– + 

+ 

– 

– 

+ – 

+ – + 

+ – + 

– + – + – 

+ + + – 

+ – + – + – 

+ – + – 

+ 

+ – 

– + – 

Yuasa Digital Battery Tester 

– 

+ + 

– + + + 

+ – + 

– 

+ – 

Developed by Yuasa exclusively for use on 

+ – 

+ – + – 

powersports batteries. 

– + 

+ – + + – 

+ – + 

– 

• Determines accurate battery status in seconds 

– 

+ – + – + – + – 

+ – + 

– – 

• Tests batteries according to A.H. rating 

+ – + – + – 

+ – + – 

• Single load, dynamic resistance technology 

+ – – + – 

minimizes battery drain during test 

+ – + – 

– 

– + – + – + 

• Tests both charged and discharged batteries 

+ – + 

– 

+ 

– – + – 

• One year warranty 

+ – – 

+ – + 

– + – 

2831681 Battery tester . . . . . . . . . . . . . . . .$299.00 

+ 

– + – 

+ – 

+ 

– 

+ 

– + – 

+ + – + 

– 

+ + 

– – 

+ 

– + – – 

+ – + – 

+ 

– + – 

+ – + – 

+ – + – 

Apparel

Motocell 

6 

Motocell Batteries 

Motocell Batteries 

Designed to provide powersports enthusiasts with high quality affordable batteries. 

•All Motocell Batteries come with a 9-month warranty. 

•With our Standard, Heavy-Duty, and Sealed lines you can select the battery that best meets your 

needs. 

6.60 

Sealed Battery 

•This Maintenance-Free battery provides reliable, worry-free performance. 

•Valve Regulated Lead-Acid (VRLA) construction means reliable performance 

in any orientation except fully inverted. 

•Absorbed Glass Mat (AGM) technology absorbs electrolyte to help prevent 

acid from leaking out in the event that the battery is damaged. 

•Most batteries ship with an acid pack and are ready to go only 20 minutes 

after adding the electrolyte. No garage is complete without a spare one! 

•The MIX30L comes factory charged and sealed – so it’s ready to go straight 

out of the box. 

Heavy-Duty Battery 

•Superior high-rate discharge performance. 

•Low-resistance separators and heavy-duty plates deliver 30% more starting 

power than our Standard batteries. 


Standard Battery 

•Time-tested technology combined with modern manufacturing processes 

makes this battery reliable and affordable.

Motocell Battery Specifications 

Motocell Battery Specifications 

Models Application Standard Heavy-Duty Sealed 

Mfg# Part# Mfg# Part# Mfg# Part# 

Softail ® 1997 to Present — — MTX20L-BS 693319 (1) 

Models $45.95 

1991 thru 1996 — — MTX20L-BS 693319 (1)(2) 

$45.95 

1984 thru 1990 — MB16-B 693170 MTX20-BS 693318 (1) 

$35.95 $45.95 

FL, FLH & 2000 to Present — — MIX30L 693406 

FLT Series $55.95 

1997 thru 1999 — MB30L-B 693184 MIX30L 693406 

$45.95 $55.95 

1980 thru 1996 — — MIX50L-BS 693320 

5-speed models $55.95 

1965 thru 1984 — MHD-12 693098 — 

4-speed models $35.95 

XL Series 1997 to 2003 — — MTX20L-BS 693319 (1) 

XL Series $45.95 

1979 thru 1996 — MB16-B 693170 MTX20-BS 693318 (1) 

XL Series and XR1000 $35.95 $45.95 

1970 thru 1978 12N7-4A 693086 MB7-A 693137 — 

XLCH Series $14.95 $19.95 

1967 thru 1978 XLH — MHD-12 693098 — 

$35.95 

FXR All models — MB16-B 693170 MTX20-BS 693318 (1) 

$35.95 $45.95 

FXD Series 1997 to Present — — MTX20L-BS 693319 (1) 

$45.95 

1991 thru 1996 — — MTX20L-BS 693319 (1)(2) 

$45.95 

FX Series 1971 thru 1986 — MB16-B 693170 MTX20-BS 693318 (1) 

electric start models $35.95 $45.95 

1971 thru 1972 12N7-4A 693086 MB7-A 693137 — 

kick start models $14.95 $19.95 

VRSC 2002 to Present — — MTX14-BS 693314 (1) 

VRSC models $45.95 

MT, SS, SX, MT500 12N7-3B 693085 MB12L-A2 693162 — 

TX & Z $14.95 $25.95 

Models SS350 6N11A-1B 693022 — — 

$14.95 

SS (except SS350), 12N7-3B 693085 MB7L-B 693140 — 

SX, TX and Z models $14.95 $19.95 

Buell ® X1, S3, S3T & M2 — — MTX20L-BS 693319 (1) 

Models $45.95 

S2, S2T, RR1200, RS1200, — — MTX20-BS 693318 (1) 

RSS1200 and RR1000 $45.95 

S1 — — MTX14-BS 693314 (3)(1) 

$45.95 

2000 to Present XB9R, XB9S — — MTX14-BS 693314 (1) 

XB12R, XB12S and 

Blast 

$45.95 

® models 

(1) Ground Freight Only (2) May require use of cover/spacer kit (CC #2831629) (3) Must use adapter kit available from Buell®. 

Motocell Custom Chrome Part# Cross Reference 

Standard 

6N11A-1B 693022 . . . . . . . .$14.95 

12N7-3B 693085 . . . . . . . .$14.95 

12N7-4A 693086 . . . . . . . .$14.95 

Heavy-Duty 

MB7-A 693137 . . . . . . . .$19.95 

MB7L-B 693140 . . . . . . . .$19.95 

MB12L-A2 693162 . . . . . . . .$25.95 

MB16-B 693170 . . . . . . . .$35.95 

MB30L-B 693184 . . . . . . . .$45.95 

MHD-12 693098 . . . . . . . .$35.95 


Sealed 

MTX14-BS 693314 . . . . . . . .$45.95 

MTX20-BS 693318 . . . . . . . .$45.95 

MTX20L-BS 693319 . . . . . . . .$45.95 

MIX30L 693406 . . . . . . . .$55.95 

MIX50L-BS 693320 . . . . . . . .$55.95 

6.61 

Apparel 

Bike Kits 

& Trailers 

Seats 

& Bags 

Foot 

Controls 

Hand 

Controls 

Lighting 


Exhaust 

Intake 

Engine 

Gaskets 

Tranny 

& Clutch 

Driveline 

Wheels, 

Tires 

& Brakes 

Frames 

Forks 

& Shocks 

Sheetmetal 

General 

Cross 

Reference


6 

Battery Cables & Accessories 

Battery Eliminator 

by White Bros. 

Fits 12-volt generator systems with 

mechanical or solid-state regulator 

when running without battery. 

Increases starting spark voltage and 

eliminates low-rpm light flickering. 

Heavy-duty, capacitor with stainless 

steel, clamp. . . . . . . . . . . . . . . .$26.49 

28276 21/2"-long x 11/2"-diameter 

Yuasa Jumper Cables 

• Heavy duty, 8 foot, 8-gauge 

cables will not stiffen or freeze 

• Tangle-resistant, encased rubber 

grips for safer use 

2831656 Jumper cables . . . .$12.79 

12V Connector Unit 

by MSB 

This connector unit is made of billet 

aluminum and features integrated 

plugs so you can charge 

your battery without removing the 

seat. Bolts on OEM and RevTech ® 

5-/6- speed gearboxes. The connector 

comes complete with all cables 

and plugs required for 

installation. . . . . . . . . . . . . . . .$159.79 

86886 Connector unit 

6.62 

370320 

All Balls ‘Ultra Flex’ 

Battery Cables 

• Increase starter performance 

by supplying maximum battery 

current to the starter motor 

• 4-gauge cable manufactured with 

pure electrolytic grade, 36-gauge 

tinned copper strands for maximum 

current transfer and flexibility 

• Specially rated 125° C, oil and gas resistant, 

ultra flexible translucent jacket 

guarantees excellent performance 

• Sold each 

370320 10"-long . . . . . . . . . . . . . . .$13.99 

370321 12"-long . . . . . . . . . . . . . . .$17.49 

370322 14"-long . . . . . . . . . . . . . . .$19.99 

370323 16"-long . . . . . . . . . . . . . . .$22.99 

370324 25"-long . . . . . . . . . . . . . . .$30.49 

Motorcycle Jumper Cables 

64 inches long, 10-gauge battery jumper cable 

set. Insulated color coded terminal clamps for 

safe and secure handling. . . . . . . . . . . . . . . . . .$9.16 

8642081 Jumper cable set 

Motorcycle 

Jumper Cables 

Top-quality booster cables that 

feature heavily-insulated, 10-gauge multistrand 

copper wire with black and red colorcoded 

plastic handles. They’re just the right 

size for getting a start boost when your battery 

doesn’t have quite enough oomph, and 

belong in everyone’s motorcycle maintenance 

kit. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$10.99 

20131 5-foot long booster cables 

47530 7" . . . . . . . .$11.79 

47531 9" . . . . . . . .$18.49 

47532 11" . . . . . . .$22.99 

47533 13" . . . . . . .$25.99 


Mega Battery Cables 

These super-flexible battery cables are computer-grade with 

1,660 strands encased in a silicone jacket. They house over 

9 times the wire of stock cables which have only 180 strands 

of wire. The number of smaller gauge wires in the cable 

makes it much more flexible and capable of delivering more 

current. The lugs are twice the thickness of standard lugs 

and are made from 99% pure electroplated copper, then 

24k gold-plated to provide a positive connection with greater 

conductivity. Kits contain the lengths needed for specific 

applications. 

Mega Cable Kits 

47521 Fits Softail ® models from 1989 to present. 

Includes a 10" ground cable and a 12" battery-tostarter 

cable . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$41.99 

47520 Fits Softail ® models from 1984 thru 1988. Includes an 

8" ground cable, a 17" battery-to-solenoid cable, and 

a 15" solenoid-to-starter cable . . . . . . . . . . . . . .$58.99 

47525 Fits 5-speed FLT, FLHT, FLHS and Road King ® models 

from 1993 to present. Includes a 13" ground cable, 

and a 14" battery-to-starter cable . . . . . . . . . . .$41.99 

47524 Fits 5-speed FLT and FLHT models from 1989 thru 1992. 

Includes a 33" ground cable and 33" battery-to-starter 

cable . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$58.99 

47523 Fits 5-speed FLT, FLHT and FLHS models from 1980 

thru 1988. Includes a 9" ground cable, a 30" batteryto-solenoid 

cable and a 30" solenoid-to-starter 

cable . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$58.99 

47522 Fits 4-speed FL models from 1965 thru 1979. Includes a 

9" ground cable, a 16" battery-to-solenoid cable and a 

16" solenoid-to-starter cable . . . . . . . . . . . . . . . .$58.99 

47527 Fits FXR models from 1989 thru 1994. Includes 

a 12" ground cable, and a 16" battery-to-starter 

cable . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$41.99 

47526 Fits FXR models from 1982 thru 1988. Includes a 12" 

ground cable, a 16" battery-to-solenoid cable and a 

16" solenoid-to-starter cable . . . . . . . . . . . . . . . .$58.99 

47528 Fits Dyna Glide models from 1991 thru 1996. Includes 

a 10" ground cable and a 15" battery-to-starter 

cable . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$41.99 

47529 Fits all Sportster ® models from 1981 thru 1994. 

Includes an 11" ground cable and a 16" battery-tostarter 

cable . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$41.99 

Individual Mega Cables 

Black insulation with copper lugs. 

47534 15" . . . . . . .$29.99 

47535 17" . . . . . . .$34.99 

47536 25" . . . . . . .$41.99 

47537 32" . . . . . . .$41.82

‘Riveted’ 

Battery Covers 

Chrome-plated covers with extra non-functional 

buttonhead rivets for that high-tech “racers 

only” look. These covers complement our complete 

line of other ‘Riveted’ covers. . . . . . .$23.44 

37258 Fits 4-speed FX models with electric start 

from 1973 thru 1986 (except Softail ® 

models) and all Sportster ® models from 

1982 to present 

26376 

26019 

Battery Covers 

for 4-Speed FL Models 

Show-chrome battery covers. Fit 4-speed FL 

models from 1970 thru 1984. Available in two 

styles, choose the one which suits your taste. 

26019 Plain . . . . . . . . . . . . . . . . . . . . . . . . . . .$16.74 

26376 Louvered . . . . . . . . . . . . . . . . . . . . . .$21.94 

26375 

12296 

26506 

Battery Covers for Sportster ® 

and FX Models with Electric Start 

Complete with cell viewing window. Fit all FX 4speed 

electric start models from 1973 thru 1986 

(except Softail ® models) and all Sportster ® models 

from 1982 thru 2003. 

12296 Plain . . . . . . . . . . . . . . . . . . . . . . . . . . . .$18.99 

26375 Louvered . . . . . . . . . . . . . . . . . . . . . . . .$17.49 

26506 24K gold wing emblem . . . . . . . . . .$20.14 

Battery Covers & Straps 

91297 

Battery Cover and Tray Kits 

Available in two different configurations. We 

offer kits with covers only which include the side 

and top covers including the hold down strap, 

or with both covers, the strap and the tray. 

Kit With Cover . . . . . . . . . . . . . . . . . . . . . .$$36.49 

91298 Fits 1973 thru 1986 4-speed FX models 

(except FX Softail ® models) 

Kit With Cover and Tray . . . . . . . . . . . .$107.95 

91297 Fits 1973 thru 1986 4-speed FX models 

(except FX Softail ® models) 

Chrome Battery Carrier Trays 

Replacement chrome battery carriers Include 

battery pad, rubber mounting studs, brackets 

and all required mounting hardware. . . . .$55.24 

26479 Fits electric start FX models from 1973 

thru 1978 (repl. OEM 66191-73) 

Battery Cover for Early 

Sportster ® Models 

Show-chrome battery covers for all electric start 

Sportster ® models from 1967 thru 1978. . .$19.39 

15142 Plain 

18932 


18930 

18933 

18931 

Battery Cables and Terminal Kits 

18930 8"-long with 1/4" holes 

(repl. OEM 70209-65A) . . . . . . . . . . . .$8.99 

18931 11"-long with 1/4" and 3/8" holes 

(repl. OEM 70097-79) . . . . . . . . . . . . .$9.99 

18932 15"-long with 1/4" and 3/8" holes 

(repl. OEM 70069-65A) . . . . . . . . . . .$10.29 

18933 85/8"-long steel braided ground 

strap with 1/4" and 3/8" holes 

(repl. OEM 70235-67A) . . . . . . . . . . . .$7.49 

Stainless Steel 

Battery Hold-Down Straps 

18-gauge stainless steel with stainless eye bolts 

and nuts. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$15.19 

25029 Fits FL models from 1970 thru 1984 

(repl. OEM 66383-70T) 

25028 Fits electric start Sportster ® models from 

1967 thru 1978 (repl. OEM 66470-67) 

25030 Fits FX and Sportster ® models with 

kickstart only from 1970 thru 1978 

(repl. OEM 66470-70T) 

25031 Fits electric start 4-speed FX models 

(except Softail ® models) from 1973 thru 

1986 and all Sportster ® models from 

1982 thru 1997 (repl. OEM 66476-73T) 

Rubber 

Battery Straps 

Duplicates of the Original Equipment 

parts. Sold each. 

25032 Fits 5-speed Touring models from 

1980 thru 1992, Softail ® models 

from 1984 thru 1993, and 1977 

thru 1979 Sportster ® and XLCR 

models (repl. OEM 66105-77) . . . . .$7.64 

300157 Rear strap for 1993-up Softail ® 

models (repl. OEM 66111-93) . . . . . .$6.94 

300158 Front strap for 1993-up Softail ® 

models (repl. OEM 66109-93) . . . . . .$9.74 

6.63 

Apparel 

Bike Kits 

& Trailers 

Seats 

& Bags 

Foot 

Controls 

Hand 

Controls 

Lighting 


Exhaust 

Intake 

Engine 

Gaskets 

Tranny 

& Clutch 

Driveline 

Wheels, 

Tires 

& Brakes 

Frames 

Forks 

& Shocks 

Sheetmetal 

General 

Cross 

Reference


6 

Battery Covers & Chargers 

15204 

12268 

6.64 

26085 

26086 

Chrome Battery Top Covers 

26085 Fits 4-speed FL models from 1965 thru 

1984 (repl. OEM 66370-65T) . . . . . .$18.07 

26086 Fits electric start 4-speed FX models 

(except Softail ® models) from 1973 thru 

1986 and all Sportster ® models from 

1982 thru 2003 

(repl. OEM 66367-73T) . . . . . . . . . . .$15.59 

26087 Fits FX and Sportster ® models with kickstart 

ONLY from 1965 thru 1978 (repl. 

OEM 66369-70T) . . . . . . . . . . . . . . . . .$15.59 

26088 Fits electric start Sportster ® models from 

1967 thru 1978 

(repl. OEM 66369-67T) . . . . . . . . . . .$16.99 

12269 

26087 

26088 

12265 

Oil Tank, Battery and Fender 

Accessories 

12265 Tall 6-volt hold-down rods 

(repl. OEMs 66390-58, 66393-58) . .$8.99 

12269 Battery top plate 

(repl. OEM 66373-54TA) . . . . . . . . . .$15.64 

12268 Battery bottom plate 

(repl. OEM 62575-36) . . . . . . . . . . . .$21.54 

15204 Battery plate bracket 

(repl. OEM 62585-36) . . . . . . . . . . . . .$8.09 

Battery Overflow Catch Tank 

Prevents acid overflow damage while still 

properly venting the battery. Includes a catch 

tank made from high-impact plastic which 

measures 4"-tall x 3/4"-thick, two reusable 

cable ties and a 24"-long piece of clear 

tubing. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$6.99 

18943 Fits all models 

15247 

15250 

15246 

‘EZ Charger’ Battery Charger 

This trickle charger delivers a maximum current 

of 600mA (milliamps). When it detects that the 

battery is nearing full charge, it drops the 

charging rate to 10-50mA, approximating the 

self-discharge rate of the battery. This insures 

that the charger will never “cook” your battery. 

The protective circuits also provide “reverse 

polarity protection” to shut down the charging 

circuit if you hook it up backwards. Each charger 

includes a quick-disconnect pigtail with grommet 

rings that stay on your motorcycle. Extra quickdisconnect 

pigtails with grommet rings or alligator 

clips for using the charger on other vehicles 

are available separately. 

15250 Charger and quick release pigtail 

with grommet rings . . . . . . . . . . . . .$35.94 

15246 Pigtail with grommet rings . . . . . . . .$5.89 

15247 Pigtail with alligator clips . . . . . . . . .$9.99 

Battery Cushions 

High-quality pure neoprene closed-cell foam 

rubber. All pieces have adhesive backing. 

Includes a 4" x 61/2" pad for the battery tray, 

and two 2" x 1" pads for the top cover. 

18940 Fits FX and FXR models from 1973 to 

present and electric start Sportster ® 

models from 1979 thru 2003 . . . . .$6.49 

Includes a 53/16" x 8" pad for the battery tray, 

and three 2" x 1" pads for the top cover. 

18942 Fits 4-speed FL models from 

1965 thru 1984 and Sportster ® models 

with large electric start batteries from 

1967 thru 1978 . . . . . . . . . . . . . . . . . .$2.14 

18941 ‘Cut-your-own kit’ for custom applications. 

Includes one 5" x 8" pad . . .$4.99 

18939 Fits Softail ® models from 

1984 thru 1996 

(repl. OEM 66210-85B) . . . . . . . . . . .$9.54 

18929 Fits Softail ® models from 

1997 thru 1999 . . . . . . . . . . . . . . . . . .$9.54 


‘OptiMate III‘ Battery Charger 

and Optimizer 

This unique and affordable battery optimizer 

diagnoses, recovers, charges, checks and maintains 

for months. 

• Electronically protected against user error 

• Just connect the OptiMate III to your battery 

and the rest is automatic 

• There are no switches, no fuse and no sparks 

• De-activates automatically if connections are 

broken 

• Includes 2 interchangeable connection sets; 

one with clamps for bench charging, and the 

other with an in-line battery protection fuse 

and eyelet terminals for permanent attachment 

to the battery posts for easy connection 

and disconnection 

• The OptiMate III supplies the minimum float 

or maintenance voltage (13.6-volts) to keep 

batteries fully charged when stored below 

60°F as recommended by manufacturers 

• Charges all 12-volt MF and AGM batteries 

(gel batteries, maintenance-free lead acid 

batteries, and flood cell lead acid batteries) 

15259 Optimate for use in North America 

and other countries with 110-volt 

household current . . . . . . . . . . . . . . .$64.79 

85015 Optimate for use in Europe or 

other countries with 220-volt 

household current . . . . . . . . .Call for price

Yuasa 12-Volt 1.5 Amp Automatic Battery Charger 

• Fully automatic 5 stage charge cycle for efficient charging: Pre-qualification 

– determines battery condition; Bulk Charge – concentrated charging 

power; Absorption – equalizes battery’s cell charge; Float Mode – 

safely maintains proper charge condition; 28 Day Charge Recycle – reevaluates 

battery status for long term storage 

• This high power unit provides error proof operation to fully charge 

maintenance-free batteries and conventional lead acid batteries 

• Provides up to 16 volts to enable recovery of sulfated batteries during 

pre-qualification stage 

• Battery accessory leads and fused ring connectors included 

• Three year warranty 

2831650 Battery charger . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$52.50 

Motocell 1 Amp Battery Charger 

Motocell Battery Chargers utilize a patented ‘switched mode’ charging 

technology, the world’s most advanced charging technology and the first 

true innovation in battery charging in over 100 years. 

• Safe for use on all 12-volt lead-acid batteries including: gel, AGM, 

wet flooded gell, etc. 

• Will prolong battery life by preventing sulfation, which can occur when 

using standard ‘linear technology’ or transformer-based chargers 

• Switched mode technology also means faster charging. Transformer 

based and linear mode chargers charge at a rate of 60 pulses per second, 

where as switched mode technology charges at a rate of 100,000 times 

per second. This means our 1 amp charger is the equivalent of a 2 amp 

standard charger 

• Technology has proven itself in highly demanding applications such as 

golf carts, scooters and power wheelchairs 

• Single LED changes color to indicate stage of charging cycle 

• The included alligator clips and fused terminal rings connect to charger 

with standard trailer connectors 

• Includes reverse polarity protection, short circuit protection, over-voltage 

protection, and AC surge protection 

• Lifetime warranty 

• Input requirements: 90-132 VAC at 47-63 Hz 

• Dimensions: 31/2" x 21/4" x 11/2" 

693600 1 Amp Battery Charger . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$49.95 


Battery Chargers 

Yuasa 12-Volt 900 mA Automatic Battery Charger 

• Fully automatic three level charge cycle for effective charging: Bulk 

Charge – concentrated charging power; Float Mode – maintains full 

charge indefinitely; Pulse Mode Tech-nology – peaks battery capacity 

which enhances battery life 

• Reaches 14.4 volts peak, then automatically switches to float 

• Reverse polarity protection, spark-free operation and designed to prevent 

overcharging 

• Battery accessory lead and fused ring connectors included 

• Two year warranty 

2831649 Battery charger . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$34.95 

Motocell 3 Amp Battery Charger 

Motocell Battery Chargers utilize a patented ‘switched mode’ charging 

technology, the world’s most advanced charging technology and the first 

true innovation in battery charging technology in over 100 years. 

• Safe for use on all 12-volt lead-acid batteries including: gel, AGM, 

wet flooded gell, etc. 

• Will prolong battery life by preventing sulfation, which can occur when 

using a standard ‘linear technology’ or transformer-based charger 

• Switched mode technology also means faster charging. Transformer 

based and linear mode chargers charge at a rate of 60 pulses per second, 

where as switched mode technology charges at a rate of 100,000 pulses 

per second. This means our 3 amp charger is the equivalent of a 6 amp 

standard charger 

• Technology has proven itself in highly demanding applications such as 

golf carts, scooters and power wheelchairs 

• Single LED changes color to indicate current stage of charging cycle 

• The included alligator clips and fused terminal rings connect to charger 

with standard trailer connectors 

• Includes reverse polarity protection, short circuit protection, over-voltage 

protection, and AC surge protection 

• Lifetime warranty 

• Input requirements: 90-132 VAC at 47-63 Hz 

• Dimensions: 41/2" x 21/4" x 11/4" 

693601 3 Amp Battery Charger . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$69.95 

6.65 

Apparel 

Bike Kits 

& Trailers 

Seats 

& Bags 

Foot 

Controls 

Hand 

Controls 

Lighting 


Exhaust 

Intake 

Engine 

Gaskets 

Tranny 

& Clutch 

Driveline 

Wheels, 

Tires 

& Brakes 

Frames 

Forks 

& Shocks 

Sheetmetal 

General 

Cross 

Reference


6 

Battery Tender 

Battery Tender ® for ‘Odyssey’ Batteries 

This compact on-board charger is designed to fully charge a battery and 

maintain it at proper storage voltage without the damaging effects caused 

by trickle chargers. It’s easy to use, and fits in tight places because it 

weighs only 21 oz. Comes with a 2 year warranty. 

• Advanced Microprocessor Circuitry that correctly charges any type of 

lead acid or sealed maintenance-free battery 

• Charges any size (capacity) lead-acid battery 

• Reverse polarity protection and water repellent circuitry 

• Complete three-step charging program (bulk charge, absorption mode, 

float mode) 

• Measures 5"-long x 4.5"-wide x 2"-tall 

15285 Charger for USA and Western Hemisphere . . . . . . . . . . . . . . . . . . .$89.95 

686836 Charger for Europe . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Call for price 

686837 Charger for England/UK . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Call for price 

Battery Tender ® Plus 

The Battery Tender Plus is a 1.25 amp battery charger designed to fully 

charge a battery and maintain it at proper storage voltage without the 

damaging effects caused by trickle chargers. 

• Upgraded circuitry 

• Temperature compensated to ensure optimum charge voltage 

• Automatically switches from full charge to float mode 

• Complete three–step charging program: bulk charge, absorption mode, 

float mode 

•Reverse polarity protection to ensure safety 

15252 Battery Tender ® Plus (measures 47/8" L x 31/4" W x 27/8" H) . .$59.99 

2851015 Replacement alligator clip-style quick connect harness . . . . . .$5.38 

15256 Replacement fused grommet-style quick connect harness . . .$6.74 

6.66 


SuperSmart Battery Tender ® 

Both the 5 and 10 bank Battery Tenders produce 2 amps per hour during 

the bulk charge cycle versus 1.25 amps per hour of the single output 

Battery Tender ® . Although the increase of only .75 amps seem small, it represents 

a 60% increase in speed of charge during the bulk charge cycle. For 

use with liquid filled batteries. Quick connect alligator clip connections. 

15000 5 bank (shown) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$559.99 

15001 10 bank . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$699.99 

Battery Tender ® 4-Bank International Charger 

The 4-Bank International battery tender charging station works anywhere in 

the world! Designed to fully charge a battery and maintain it at proper 

storage voltage without the damaging effects caused by trickle chargers. 

• Features 4 independent charging systems and 12 volts at 1.25 amps per 

station 

• Weighs less than 3 lbs.! 

• Operates anywhere in the world (100-240 VAC 50/60 Hz.) 

• Microprocessor controlled constant current charging 

• Reverse polarity protected 

• Complies to all International safety standards 

• Perfect for all AGM, sealed maintenance free and flooded batteries 

• Optional 25 ft. extension leads available 

• Features 2 year warranty! 

615810 4-Bank charger for USA and Western Hemisphere . . . . . . . . . . .$259.95 

686834 4-Bank charger for Europe . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Call for price 

686835 4-Bank charger for England/UK . . . . . . . . . . . . . . . . . . . . . . . .Call for price 

615811 4-Bank charger for Japan . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$259.95 

615812 4 pack of 25 ft. extension leads . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$34.95

Battery Tender ® Waterproof Automatic Battery Charger 

• Sparkproof even when leads are touched together 

• Reverse polarity protected – will not damage charger if hooked up incorrectly 

• Safe in all weather conditions 

• Easy to install and use 

• Safe and easy to use on all lead acid batteries 

• Will safely charge and maintain any size battery though 200 amp-hour capacity 

• Solid-state two color LED indicates start of charge 

2851024 Charger for USA and Western Hemisphere . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$49.95 

686744 Charger for Europe . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Call for price 

686838 Charger for England/UK . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Call for price 

Battery Tender ® International 

Finally, a compact, lightweight automatic 

battery charger that will operate anywhere 

around the world! Programmed 

specifically for the new sealed maintenance-free 

AGM (absorbed glass matte) 

batteries. Does not shut off or trickle 

prior to reaching a full charge. 

• Features water resistant case 

• Temperature compensation sensor 

adjusts voltage for extreme heat 

or cold 

• Automatically switches from full 

to float charge 

• High frequency design 

• 12 volt – 1.25A output with input voltage range from 100-240V 

• Multiple plugs available for most countries 

• Weighs 6 oz. 

615805 Charger for USA and Western Hemisphere . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$69.99 

686832 Charger for Europe . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Call for price 

686833 Charger for England/UK . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Call for price 

Optional AC Power Cords 

615806 Europe AC power cord (sold each) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$9.49 

615807 England/UK AC power cord (sold each) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$9.49 

615808 Australia AC power cord (sold each) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$9.49 

615809 Japan AC power cord (sold each) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$9.49 


2851015 Alligator clip-style quick connect harness . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$5.38 

15256 Fused grommet-style quick connect harness . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$6.74 


Battery Tender 

Battery Tender ® Portable 

Power Tender International 

• Utilizes BTM microprocessor technology 

• Single output 12-volt battery charger with bi-level 

DC output current 

• Will not overcharge or overheat a small battery 

• Spark proof and short circuit protected 

• Reverse polarity protected 

• Accessory storage compartment 

• Unique 3-wire cable accessories 

• Backed by a 2 year manufacturer's warranty 

• Comes with easy to follow instructions and connectors 

2851025 For USA/Western Hemisphere . . . . . . . . . . . . . . .$129.95 

Battery Tender Junior 

Battery Tender Junior is a 750 mA, lightweight, compact trickle 

charger with a brain. Ideal for those hard-to-fit spots. 

• Fully automatic two stage battery charger perfect for all 

lead-acid, sealed maintenance-free and gel cell batteries 

• After reaching peak 14.4 VDC, charge automatically switches 

to 13.2 float voltage 

• When voltage drops below 12.6 VDC charge resumes, 

changing back to 14.4 VDC 

• Two color LED indicates state of charge 

• Reverse polarity protected and spark proof 

• 12 foot output cord (measures 35/16" L x 25/16" W x 17/8" H) 

15002 Battery Tender ® Junior . . . . . . . . . . . . . . . . . . . . . . .$34.99 

2851015 Replacement alligator clip-style 

quick connect harness . . . . . . . . . . . . . . . . . . . . . . . .$5.38 

15256 Replacement fused grommet-style 

quick connect harness . . . . . . . . . . . . . . . . . . . . . . . .$6.74 

6.67 

Apparel 

Bike Kits 

& Trailers 

Seats 

& Bags 

Foot 

Controls 

Hand 

Controls 

Lighting 


Exhaust 

Intake 

Engine 

Gaskets 

Tranny 

& Clutch 

Driveline 

Wheels, 

Tires 

& Brakes 

Frames 

Forks 

& Shocks 

Sheetmetal 

General 

Cross 

Reference


6 

Battery Chargers & Testers 

Motion Pro ® 

OptiMate Pro 8 

• OptiMate Pro 8 automatically assesses, recovers, 

charges and tests up to eight batteries 

simultaneously 

• Works with all 12-volt lead-acid batteries 

including sealed types 

• Accommodates and deals with batteries of 

different sizes, types and conditions simultaneously 

• Detects shorted "cell" type defects and 

ensures quickest optimal charge regardless 

of battery condition 

• Simple to read battery status indicator panel 

for each battery 

• 1.2 Amp constant-current charge, then constant 

voltage float charge to keep batteries 

fresh and ready to go 

• Full automatic electronic protection against 

inverse polarity connection and short circuit. 

No fuses to replace 

• So safe, it is impossible to generate a spark, 

even by short-circuiting 

• Optional wall mount sold separately – leaves 

work bench free for batteries and keeps 

OptiMate away from acid contamination 

• The OptiMate Pro 8 is a drop-ship item only 

and can be shipped directly to your dealership. 

Ask your Sales Representative for details 

5008191 Optimate Pro 8 . . . . . . . . . . . . . . .$497.20 

5008197 Optional wall mount . . . . . . . . . .$17.30 

6.68 

Motion Pro ® BatteryMate 

• BatteryMate is a combination of a load tester 

and powerful constant current charger with 

automatic desulfating action 

• Load tester features six load test choices, 

adjustable load test duration (3 seconds for 

standard crank test or 15 seconds for long 

crank and battery capacity check), protects 

against overheating by an automatic disabling 

rest period which occurs after a 3 or 

15 second crank or battery test, clear LED 

indications to user during "test" and "rest" 

(disabled) periods 

• Indicates when battery is too weak to show 

a test result 

• Offers an automatic (resetting) disablement in 

case of overheating, with LED status indication 

• Charger features six constant current settings 

from 1 amp to 9 amps for correct, most timeeffective 

charging 

• Gives constant current charge followed by 

13.8 volts constant voltage maintenance 

mode until selected time (max. six hours) 

has elapsed 

• A LED signals the end of the main constant 

current charge and progression to maintenance 

mode, to indicate the battery can be 

tested for starting, or can be left connected 

for further "top-up" charging 

• Charging timer is selectable in half–hour 

increments up to three hours, then hourly up 

to six hours 

• Effective high voltage mode engages automatically 

for recovery of deep discharged 

and many sulfated batteries 

• Automatic charger switch–off in case of 

charge time selection change during charging 

• Optional wall mount sold separately – leaves 

work bench free for batteries and keeps 

BatteryMate away from acid contamination 

• The BatteryMate is a drop-ship item only and 

can be shipped directly to your dealership. 

Ask your Sales Representative for details 

5008192 BatteryMate . . . . . . . . . . . . . . . . .$749.30 

5008197 Optional Wall Mount . . . . . . . . . .$17.30 


BatteryMINDer ® Battery Charger 

• 12-volt, 1 amp output 

• Maintains up to four batteries at one time 

• Never overcharges and restores weak batteries 

• High frequency pulses safely removes sulphate 

from battery’s plates that prevent 

batteries from holding a full charge 

• For all batteries including gel and deep cycle 

• LEDs indicate charge and desulphation 

modes, blinks when charging is complete 

• Polarity, short circuit and temperature protected 

• Features manual push button override, two 

quick connects and a 12-foot cord 

656540 BatteryMINDer ® . . . . . . . . . . . . . . . . .$59.95 

Yuasa Digital Battery Tester 

Developed by Yuasa exclusively for use on 

powersports batteries. 

• Determines accurate battery status in seconds 

• Tests batteries according to A.H. rating 

• Single load, dynamic resistance technology 

minimizes battery drain during test 

• Tests both charged and discharged batteries 

• One year warranty 

2831681 Battery tester . . . . . . . . . . . . . . . .$299.00

Electrical - Custom Bikes by Mike

Create successful ePaper yourself

Delete template?

Save as template?