Econ Leaflet A4 -A3 Revisedddress - Econosto Mideast

Fire Econosto Protection Mideast EngineeringB.V.Fire Fighting Product Catalogue

Publisher: Econosto Mideast b.vPhotography and illustrations : Marketing Department, Econosto Mideast b.vEdition: EME/F/V/14/00This catalogue has been compiled with greatest care and we have endeavored to provide information asaccurate as possible. However Econosto Mideast b.v cannot be held responsible for any possible errors,omissions and inaccurate / incomplete information as a result of further developments / changes and norights may be derived from its content. Data given in this catalogue may be changed without notice.The sizes and weights in this catalogue are published with all rights reserved. We reserve the right to makeadjustments to these data for technical and economical reasons and also due to Econosto’s continuingprogram of product improvement. Every data change will be incorporated in the next revision of thiscatalogue. You can get information about the changes in data from the sales department of Econosto or thelocal distributor in your area.Copyright : No part of this publication may be reproduced, stored in a retrieval system, or transmitted, inany form or by any means, electronic, mechanical, photocopying, recording, or otherwise, without the priorwritten permission of the publisher.

Company Profile - Econosto GroupYour Partner in ValvesECONOSTO MIDEAST B.V. is part of the Econosto Group established in 1892 in Rotterdam –The Netherlands.Econosto N.V. is an international group of technical companies (part of ERIKS n.v. acquired bySHV Holdings n.v. in The Netherlands in 2009) with operations in Europe, the Middle East andFar East, and with 56000 employees globally.• Top quality products• Global manufacturer• More than one million items in stock• More than 120 years of experience• Worldwide after sales service• Local customer focus• Technical support• Problem solving• 24 Hour service availability• Engineering capabilities• Product innovationEconosto Group Head Office in HollandActivitiesIt’s core activities include the development, manufacturing, marketing, distribution and service of afull range of high-quality valves, gaskets, industrial hoses, pipes and fittings, flanges and relatedequipment for the chemical and petrochemical industries, shipbuilding, equipment and machineengineering, heating, ventilation & air-conditioning and general industry. Added value is providedby developing, machining and supplying products specifically geared to projects and customers.In this respect, Econosto specifically benefits from intensive contacts with leading industrialengineering firms. An increasing percentage of sales is generated on the project market, in theform of non-recurring, long-term contracts that guarantee future contributions to cash flow.Econosto is an international market leader committed to providing high quality products backed byoutstanding customer service and technical support.Global Manufacturer & SupplierEconosto’s experience in valves, pipes, flanges, gaskets, instruments and pipeline equipmentspreads over more than 120 years. Econosto has well established sales offices, warehouses(stocks) and sound representations throughout major countries and markets of the world.Econosto Mideast B.V. has made significant presence in the Middle East, CIS countries & Africaand is well entrenched in the UAE and other countries in the G.C.C. In other territories likeJordan, Lebanon, Egypt and Syria, Econosto operates through reputed agents. Econosto has ateam of dedicated and qualified engineers in the sales and marketing division in all offices in UAE(Dubai, Sharjah and Abu Dhabi), Qatar, Saudi Arabia (Dammam, Jubail, Jeddah and Riyadh),BahrainPakistan (Karachi), China (Shanghai) and India (Mumbai and Trivandrum).irEME/F/V/14/00EME/F/V/14/00F/ FMire Fighting Application/ Fhis represents a small selection of our vast product range.Fire Fighting Product Catalogue page 03 page 03

Enormous assortment, Maximum logisticsAll our operating companies have their own storage facilities and are stocked with a large numberof articles. Above that they are supported byEconosto Factory cum Warehouse in Holland - An aerial viewthe logistic organization of the automateddistribution centre in the Netherlands. Togive you an idea: there are more than 1million products in stock and more than200,000 deliveries area processed everyyear. By using modern communicationtechniques our clients can order 24 hours aday 7 days a week and be delivered quicklyand efficiently. The combination of extensivestocks and different distribution centersworldwide guarantee a ‘just-in-time’ delivery.Key supplyEconosto has found that the interest in a single source - Key Supplier - is greatly increasing. Asan integral part of the departments of logistics, purchase and quality, this allows efficiencyimprovements to be applied. This results in a cost reduction with a positive effect on achievingbusiness goals. As a Key Supplier Econosto secure local availability. Considerable costreductions have already been achieved for partners like DSM, General Electric, DuPont deNemours and Akzo Nobel. Econosto has extensively described this view in the booklet‘Successful supplier relationships through Strategic Sourcing’.QualityYou can expect the highest quality from us. Total Quality Management covers all areas fromproduct development through production to product inspection and testing. In addition to this,Total Quality Management makes a positive contribution to our own organization; trainingpersonnel, purchase, contract evaluation, service and document management.Commitment to QualityWithin the Econosto group, Quality reignssupreme. The name Econosto is respectedas one of the leading manufacturers ofvalves and related pipeline equipment in theworld. It’s a reputation earned through thephilosophy of total dedication to quality,innovation and customer service that’s beenDistribution Centre in Hollanda hallmark of the Econosto Group. And it’s areputation we strive to maintain. Ouroperating mission is to continue to produce an unrivalled level of excellence in our products,service, performance and availability.EME/F/V/14/00EME/F/V/14/00Fire Fighting Product Catalogue page 04 04

Company Profile - Econosto Mideast B.V.OverviewEconosto Mideast B.V. is part of the Econosto Group established in 1892 in Rotterdam - TheNetherlands. It is the subsidiary of Econosto Flow and Sealing Technology B.V. based in theNetherlands. In 1983, we began our pioneering efforts to build ourselves into a force to reckonwith in the Middle East. Growing from strength to strength, Econosto Mideast B.V. has its headquarters in Dubai Investments Park (DIP), Dubai and our own offices and agents in most of theMiddle East countries, neighbouring Arab countries, Africa and the sub-continent.An emphasis on quality, focussed andinnovative business approach havecatapulted Econosto Mideast B.V. into theforefront of Valves , Pipes and relatedequipment manufacturers / suppliers in theMiddle East. We are confident that theperformance of our products coupled withour exemplary service to our customershas been at the root of our success. Ourendeavor has always been to betterourselves and realize our vision. Theoperating mission is to continue toproduce an unrivalled level of excellence in our products, performance and availability.Econosto’s experience in valves, pipes, flanges, gaskets, instruments and pipeline equipmentspreads over more than 120 years. Econosto has well established sales offices, warehouses(stocks) and sound representations throughout major countries & markets of the world. Under thedynamic team of thorough - core professionals Econosto Mideast B.V. has made significantpresence in the Middle East, the Arab world, CIS counties & Africa and is well entrenched in theU.A.E. and other countries in the G.C.C. Apart from other countries Econosto Mideast B.V. alsohave offices in India, Pakistan and South Africa. In other territories like Jordan,Lebanon, Egypt, Syria, Kazakhistan we operate through reputed agents. Econosto has a team ofdedicated and qualified Engineers in the sales & marketing division in all our offices (Sharjah,Dubai, Abu Dhabi, Qatar, Kuwait, Saudi Arabia, Oman, Pakistan, South Africa) to ensure a highlevel of professional service to our customers.All products designed, manufactured andsupplied by Econosto Group meet theirQuality Management System which hasbeen assessed and approved by LloydsRegister Quality Assurance Limitedagainst the following Quality Assurancestandards.Econosto Mideast Quality Management System has been approved by ABS Quality EvaluationsLtd., in compliance with: Quality - ISO 9001:2008, Environmental Management System - ISO 14001:2004, Occupational Health & Safety - OHSAS 18001: 2007.EME/F/V/14/00EME/F/V/14/00Fire Fighting Product Catalogue page 05 page 05

Econosto is an international market leader committed to providing high quality products backedby outstanding customer service and technical support. Our global expertise combined with localavailability, ensures that our customers benefit from high quality products, together withoutstanding customer service and technical support.Warehouses in Dubai and Abu Dhabi, one of the largest in the Middle East, facilitate exstockdelivery of valves, Instruments, gaskets, pipes, fittings and pipeline equipment and operate on afully computerized stock control system toensure continued availability and thuscustomer satisfaction. We also have astocking point in Dammam in Saudi Arabiafor local distribution in the Kingdom. Thestandard inventory comprises of aexhaustive range of Valves, Pipes, Fittings(M.I. & B.W), Flanges, Gaskets, GroovedFittings and Couplings, Instruments andrelated pipeline equipment according toAPI, DIN, BS EN, ANSI and ASTMspecifications. Our warehouse and officein Dubai Investments Park has an areaof 30,000 sq.meters and is located at aprime location in Dubai.Meeting expectationsOur industrial customers are constantly innovating. Econosto can make a strong contribution inresearch and development through technical support and applications. It goes without saying thatthese products not only meet our own strict norms but certainly comply with client specificationstoo. Thanks to our skilled engineers and well equipped production plants we can modify and testproducts under our own control to meet the client’s wishes. With the strength of our knowledge,we always find a suitable solution.Project managementThe combination of the knowledge of project management, planning, co-ordination, progresscontrol and status reporting give Econosto an unique position in the market. That is why you canexpect us to be able to manage national and international projects in a professional manner.In addition we have extensivecollaborations with renowned engineeringand consultancy companies. Andregardless the size of the project,Econosto always delivers in compliancewith the applicable quality, safety, laborconditions and environmental norms.EME/F/V/14/00EME/F/V/14/00Advantages• Complete product range according to the validnorms and specification• Technical support and consultancy• Just-in-time deliveries• Key supply and total cost of ownership• Specials according to client specification• Project and account management• Framework agreements ire and Fighting bundled Application deliveries• After-sales service/ F• Our own product development and engineeringFire Fighting Product Catalogue page 06 06

Vision & Mission Statement and QHSE PolicyVISION STATEMENT· To be the best in class by creating a corporate culturethat will be a model of an innovative company.· EME will be a dynamic, unique and profitablebusiness enterprise that achieves unrivalled customerservice by our people, passionately striving to be thebest· EME will be the leading company in the industry withcontinuous commitment to quality & total customersatisfaction· EME will not only be the best in class, it will be afantastic company with a great environment to workin, where everybody feels comfortable, grows andenriches both their professional and personal life,having a lot of fun in the processMISSION STATEMENT· To be the leading manufacturer and supplier in thevalve and piping industry conducting our businesswith total integrity.· To form strategic alliances and partnerships withcustomers and suppliers, to understand their needs,with an aim to add value, by providing cost effectiveproducts and solutions that are of the highest qualitystandards.· To be passionately customer focused and marketdriven, continually striving to raise our performancelevels.· To constantly find new ways to exceed expectationsof our customers and to stay ahead of the competitionthrough innovation· To attract and retain the brightest, boldest andenthusiastic workforce and create an environmentwhere each individual can develop to their fullpotential.· To deliver our stake holders increased sustained andsuperior returns.QHSE POLICYWe at Econosto Mideast b.v. aim to achieve the highest standards ofQuality, Health, Safety and Environment throughout our operations.QualityWe are driven by our commitment to continuous quality improvement andexceeding our customer expectations. Since the establishment of EconostoMideast b.v. in 1984, our dominant operating philosophy has been torecognize client requirements and develop / provide superior quality,competitive products and professional services to satisfy and exceed ourcustomer expectations. Customer delight through total quality and servicehas been our guiding force.We firmly believe that an internationally recognized Quality ManagementSystem complying with ISO 9001:2008 is an important element in achievingour strategic business goals and objectives. We regard Quality Assuranceas an on-going process integrated into the overall corporate goal-settingprocess.Health, Safety and Environment (HSE)Econosto Mideast b.v. affirms its commitment to provide and continuallyimprove a safe and healthy work place for all its employees and ensure thatits operations are carried out in a manner that protects the environment andcommunity in general.Our philosophy is that all accidents are preventable and no task is soimportant that risk of injury to people or damage to the environment isjustified.Our objectives shall be based on:· Promoting a positive HSE culture and complying with allapplicable HSE statutory regulations· Identifying, eliminating, preventing and controlling hazards andpollution that could cause injury, illness, or environmentaldamage· Providing training and resources for employees to maintain HSEsystems and integrating HSE procedures into every operationwithin the companyEvery member of the management team shall visibly uphold the principlesof this policy and integrate them throughout their operations and ensure theHSE management system is implemented and maintained to sustain thispolicy.Chris Frietman - Managing DirectorEconosto Mideast B.V. (EME)Chris Frietman - Managing DirectorEconosto Mideast B.V. (EME)CertificatesISO 9001 Certificate - Econosto Nederland b.vNFPA CertificateEME/F/V/14/00EME/F/V/14/00Fire Fighting Product Catalogue page page 07 07

Quality, Health & Safety and Environment Management System (QHSE)Quality, Health & Safety and Environment Management System (QHSE)ISO 9001:2008 Quality Management System (QMS)ABS Quality EvaluationsISO 9001:2008 Certificate Quality Of Conformance Management System (QMS)This is to certify that the Quality Management System of:Econosto Mideast B.V.Econosto Mideast B.V.Plot No: 598/1040, Dubai Investment ParkPost Box No: 60789DubaiUnited Arab EmiratesABS Quality EvaluationsISO 9001:2008Certificate Of ConformanceANNEXCertificate No: 32714Econosto Mideast B.V.At Below Facilities:(WITH ADDITIONAL FACILITIES LISTED ON ATTACHED ANNEX)has been assessed by ABS Quality Evaluations, Inc. and found to be in conformance with the requirements set forth by:ISO 9001:2008The Quality Management System is applicable to:Facility: Econosto Mideast B.V.Facility:Econosto Mideast B.V.P.O. Box 70187P.O. Box No. 371504, 15 th Floor,Ahmad Sultan Abdullah Al Otaiba Building,NajdaY.B.A.Kanoo Machinery Building,Al Khalidia, Dammam-Khobar HigAbu DhabiDammam 31411United Arab EmiratesSaudi ArabiaActivity: Sales and Servicing Provision. Activity: Sales and Servicing provision excluding Marine.SALES AND SERVICING OF VALVES, PIPES, FITTINGS, FLANGES, INSTRUMENTS, GASKETS AND SEALINGPRODUCTS, EQUIPMENT AND ACCESSORIES FOR OIL & GAS, PETROCHEMICAL, HVAC, FIRE PROTECTION,WATER WORKS, MARINE AND PROCESS INDUSTRIES.Facility: Econosto Mideast B.V.Facility: Econosto Mideast WLLP.O. Box No. 812P.O. Box No. 31316Y.B.A.Kanoo Building,Medina Road,Next to Kubri MurabbaLogistic Village,Zone 91, Wadi Abu Seleel,Al WukairJeddah 21421DohaSaudi ArabiaQatarActivity: Sales and Servicing provision excluding Marine. Activity: Sales and Servicing provision excluding Marine.Certificate No: 32714Original Certification Date: 08 August 1995Effective Date: 17 July 2013Expiration Date: 10 August 2016Revision Date: 17 July 2013 Alex Weisselberg, PresidentValidity of this certificate is based on the periodic audits of the management system defined by the above scope and is contingent upon prompt, writtennotification to ABS Quality Evaluations, Inc. of significant changes to the management system or components thereof.ABS Quality Evaluations, Inc. 16855 Northchase Drive, Houston, TX 77060, U.S.A.Validity of this certificate may be confirmed at www.abs-qe.com/cert_validation.Validity of this certificate may be confirmed at www.abs-qe.com/cert_validation.Copyright 2011 ABS Quality Evaluations, Inc. All rights reserved.OHSAS 18001:2007 Health & Safety Management System Copyright 2011 ABS Quality Evaluations, (HSM)Inc. All rights reserved.Page 1 of 2OHSAS 18001:2007 Health & Safety Management System (HSM)ABS Quality EvaluationsABS Quality EvaluationsCertificate Of ConformanceThis is to certify that the Health and Safety Management System of:Econosto Mideast B.V.Econosto Mideast B.V.Plot No: 598/1040, Dubai Investment ParkPost Box No: 60789DubaiUnited Arab EmiratesOHSAS 18001:2007Certificate Of ConformanceANNEXCertificate No: 44610Econosto Mideast B.V.At Below Facilities:Page 2 of 2(WITH ADDITIONAL FACILITIES LISTED ON ATTACHED ANNEX)has been assessed by ABS Quality Evaluations, Inc. and found to be in conformance with the requirements set forth by:OHSAS 18001:2007The Health and Safety Management System is applicable to:Facility: Econosto Mideast B.V.Facility:Econosto Mideast B.V.P.O. Box 70187P.O. Box No. 371504, 15 th Floor,Ahmad Sultan Abdullah Al Otaiba Building,NajdaY.B.A.Kanoo Machinery Building,Al Khalidia, Dammam-Khobar HigAbu DhabiDammam 31411United Arab EmiratesSaudi ArabiaActivity: Sales and Servicing Provision. Activity: Sales and Servicing provision excluding Marine.SALES AND SERVICING OF VALVES, PIPES, FITTINGS, FLANGES, INSTRUMENTS, GASKETS AND SEALINGPRODUCTS, EQUIPMENT AND ACCESSORIES FOR OIL & GAS, PETROCHEMICAL, HVAC, FIRE PROTECTION,WATER WORKS, MARINE AND PROCESS INDUSTRIESFacility: Econosto Mideast B.V.Facility: Econosto Mideast WLLP.O. Box No. 812P.O. Box No. 31316Y.B.A.Kanoo Building,Medina Road,Next to Kubri MurabbaLogistic Village,Zone 91, Wadi Abu Seleel,Al WukairJeddah 21421DohaSaudi ArabiaQatarActivity: Sales and Servicing provision excluding Marine. Activity: Sales and Servicing provision excluding Marine.Certificate No: 44610Original Certification Date: 14 September 2010Effective Date: 23 September 2013Expiration Date: 13 September 2016Revision Date: 24 September 2013 Alex Weisselberg, PresidentValidity of this certificate is based on the periodic audits of the management system defined by the above scope and is contingent upon prompt, writtennotification to ABS Quality Evaluations, Inc. of significant changes to the management system or components thereof.ABS Quality Evaluations, Inc. 16855 Northchase Drive, Houston, TX 77060, U.S.A.Validity of this certificate may be confirmed at www.abs-qe.com/cert_validation.Copyright 2011 ABS Quality Evaluations, Inc. All rights reserved.ISO 14001:2004 ISO 14001:2004 Environment Management System System (EMS) (EMS)Copyright 2011 ABS Quality Evaluations, Inc. All rights reserved.Validity of this certificate may be confirmed at www.abs-qe.com/cert_validation.ABS Quality EvaluationsCertificate Of ConformanceThis is to certify that the Environment Management System of:Econosto Mideast B.V.Econosto Mideast B.V.Plot No: 598/1040, Dubai Investment ParkPage 1 of 2ABS Quality EvaluationsISO 14001:2004Certificate Of ConformanceANNEXCertificate No: 44609Page 2 of 2Post Box No: 60789DubaiUnited Arab EmiratesEconosto Mideast B.V.At Below Facilities:(WITH ADDITIONAL FACILITIES LISTED ON ATTACHED ANNEX)has been assessed by ABS Quality Evaluations, Inc. and found to be in conformance with the requirements set forth by:ISO 14001:2004The Environment Management System is applicable to:Facility: Econosto Mideast B.V.Facility:Econosto Mideast B.V.P.O. Box 70187P.O. Box No. 371504, 15 th Floor,Ahmad Sultan Abdullah Al Otaiba Building,NajdaY.B.A.Kanoo Machinery Building,Al Khalidia, Dammam-Khobar HigAbu DhabiDammam 31411United Arab EmiratesSaudi ArabiaActivity: Sales and Servicing Provision. Activity: Sales and Servicing provision excluding Marine.SALES AND SERVICING OF VALVES, PIPES, FITTINGS, FLANGES, INSTRUMENTS, GASKETS AND SEALINGPRODUCTS, EQUIPMENT AND ACCESSORIES FOR OIL & GAS, PETROCHEMICAL, HVAC, FIRE PROTECTION,WATER WORKS, MARINE AND PROCESS INDUSTRIESFacility: Econosto Mideast B.V.Facility: Econosto Mideast WLLP.O. Box No. 812P.O. Box No. 31316Y.B.A.Kanoo Building,Medina Road,Next to Kubri MurabbaLogistic Village,Zone 91, Wadi Abu Seleel,Al WukairJeddah 21421DohaSaudi ArabiaQatarActivity: Sales and Servicing provision excluding Marine. Activity: Sales and Servicing provision excluding Marine.EME/F/V/14/00EME/F/V/14/00Certificate No: 44609Original Certification Date: 20 September 2010Effective Date: 16 September 2013Expiration Date: 19 September 2016Revision Date: 18 September 2013 Alex Weisselberg, PresidentValidity of this certificate is based on the periodic audits of the management system defined by the above scope and is contingent upon prompt, writtennotification to ABS Quality Evaluations, Inc. of significant changes to the management system or components thereof.ABS Quality Evaluations, Inc. 16855 Northchase Drive, Houston, TX 77060, U.S.A.Validity of this certificate may be confirmed at www.abs-qe.com/cert_validation.Validity of this certificate may be confirmed at www.abs-qe.com/cert_validation.Copyright 2011 ABS Quality Evaluations, Inc. All rights reserved.HVAC Product Catalogue Copyright 2011 ABS Quality Evaluations, Inc. All rights reserved.page 08 08Page 1 of 2Page 2 of 2

Specialized servicesoffered are:Fire Protection Engineering:Code ConsultingBuilding Code AnalysisLife Safety EvaluationsExit Analysis StudiesFire & Life Safety Program DevelopmentPerformance-Based Design ReviewsValue EngineeringCode Consulting:Building Code AnalysisLife Safety EvaluationsExit Analysis StudiesFire & Life Safety Program DevelopmentPerformance-Based Design ReviewsSystem(s) – Turnkey Solutions:Sprinkler Systems as per NFPA 13Standpipe Systems as per NFPA 14Fire Water Pumping System as per NFPA 20Deluge Spray Systems as per NFPA 16Foam based System as per NFPA 11Fire Alarm System as per NFPA 72Fire Hydrant Systems as per NFPA 24 & 1141Clean Agent Systems as per NFPA 2001 &other required suppression systems as perrelevant NFPA standards.Fire Protection Division emphasizesinnovation in each project. Our goal isto find the optimal solution thatprovides a high level of life safety andasset protection at the best possiblecost while meeting all applicablecodes and regulations.Our number one focus is service toour customers and communicationwith all stakeholders in each project.We believe that good design coupledwith open and honest communicationbetween all partners through theentire design and construction of aproject is the recipe for a successfuloutcome and happy clients.Our ultimate goals are to build longterm relationships with our clients, toadvance the field of fire protection, tosave lives and property throughexcellent design, and to be profitablewhile doing so.Econosto’s Fire Protection Division {ECON FIRE} specializes in nearly every sector of Fire Protection & CodeConsulting including fire protection systems design, supply, installation(thro’ working partners), testing &commissioning, maintenance, building code analysis, fire & life safety studies, plan review (all disciplines), fireprotection master planning, and educational seminars.Our engineers have extensive experience in large-scale projects for all types of occupancies and are well versedon the entire model building codes (including the International Codes) and NFPA codes & standards.“Centralized Engineering Department” effectively utilizes their computer capabilities for hydraulic analysis,computer-aided design (Auto CAD), cost estimating and project management.EME/F/V/14/00EME/F/V/14/00Fire Fighting Product Cataloguepage 09 09

ECON Fire ExtinguishersDry Powder Fire ExtinguishersTechnical SpecificationNo01 ModelECON-DP-01 ECON-DP-02 ECON-DP-03 ECON-DP-04 ECON-DP-060203TypeCapacity1 Kg 2 Kg 3 KgABC Powder4 Kg6 Kg04 Propellant TypeStore Pressure05 Working Pressure15 bar06 Test Pressure2 bar07 Overall Height 351mm 383mm 435mm 490mm 540mm08 Cylinder Diameter 85mm 110mm 130mm 130mm 154mm09 Overall Weight 1.9 Kg 3.6 Kg 5.2 Kg 6.8 Kg 9.3 Kg10 Body MaterialCold Roll Steel11 StandardAs per manufacturer standard12 Paint FinishRed13 Temprature Range.-30ºC - +60ºC14 Fire Rating 8A 55B C 13A 89B C 21A 113b C 27A 144B C 43A 233B CECON-DP-099 Kg556mm182mm13.7 Kg55A 233B CECON-DP-1212 Kg672mm190mm17.4 Kg55A 233B CCarbon Dioxide (CO ) Fire Extinguishers2Technical SpecificationNo01020304050607080910111213ModelECON-CO-02 ECON-CO-05TypeCapacity2 KgCarbon Dioxide (CO 2)5 KgWorking Pressure150 barTest Pressure250 barOverall Height 565mm745mmCylinder Diameter 103mm136mmOverall Weight 6.2 Kg14.4 KgBody MaterialCold Roll SteelStandardAs per manufacturer standardPaint FinishRed or BlackTemprature Range.-30ºC - +60ºCFire Rating 34 B70 BEME/F/V/14/00EME/F/V/14/00Note : The products specified in this brochure are subject to continual development and improvement. Information in this brochure is subject to alteration without notice.All dimensions in mm unless otherwise specified.Fire Fighting Product Catalogue AJ-03-001 page 137 11 11

ECON Fire Hose CabinetsDouble Door Fire Hose CabinetsTechnical SpecificationNo01 MaterialMild Steel02 Thickness1.2mm03 InstallationSurface Mounted / Recessed Mounted04 FinishingRed Powder Coated05 HingesPush pin, PianoModel No Type Size (mm)ECON-FHC-01 Surface Mounted 1600 (h) X 800 (w) X 300 (d)ECON-FHC-02 Recessed Mounted 1600 (h) X 800 (w) X 300 (d)Double Door Fire Hose CabinetsTechnical SpecificationNo01 MaterialECON-FHC-03 Complete Stainless SteelECON-FHC-04 Back box Mild Steel and Door & Frame Stainless Steel02 Thickness1.2mm03 InstallationSurface Mounted / Recessed Mounted04 FinishingBrush Finish / Mirror Finish05 HingesPush pin, PianoModel No Type Size (mm)ECON-FHC-03 Surface Mounted 1600 (h) X 800 (w) X 300 (d)ECON-FHC-04 Recessed Mounted 1600 (h) X 800 (w) X 300 (d)EME/F/V/14/00EME/F/V/14/00Note : The products specified in this brochure are subject to continual development and improvement. Information in this brochure is subject to alteration without notice.All dimensions in mm unless otherwise specified.Fire Fighting Product Catalogue AJ-03-001 page page 12137

ECON Fire Hose CabinetsSingle Door Fire Hose CabinetsTechnical SpecificationNo01 MaterialECON-FHC-05 Mild SteelECON-FHC-06 Stainless Steel02 Thickness1.2mm03 InstallationSurface Mounted04 FinishingECON-FHC-05 Red Powder CotedECON-FHC-06 Brush Finish / Mirror Finish05 HingesPush pin, PianoModel No Type Size (mm)ECON-FHC-05 Surface Mounted 800 (h) X 800 (w) X 300 (d)ECON-FHC-06 Surface Mounted 800 (h) X 800 (w) X 300 (d)Single Compartment Fire Hose CabinetsTechnical SpecificationNo01 MaterialECON-FHC-07 Mild SteelECON-FHC-08 Back box Mild Steel and Door & Frame Stainless Steel02 Thickness1.2mm03 InstallationRecessed Mounted04 FinishingECON-FHC-07 Red Powder CotedECON-FHC-08 Brush Finish / Mirror Finish05 HingesPush pin, PianoModel No Type Size (mm)ECON-FHC-07 Recessed Mounted 800 (h) X 800 (w) X 300 (d)ECON-FHC-08 Recessed Mounted 800 (h) X 800 (w) X 300 (d)EME/F/V/14/00EME/F/V/14/00Note : The products specified in this brochure are subject to continual development and improvement. Information in this brochure is subject to alteration without notice.All dimensions in mm unless otherwise specified.Fire Fighting Product Catalogue AJ-03-001 page 137

ECON Fire Hose CabinetsDouble Door Fire Hose CabinetsTechnical SpecificationNo01 MaterialECON-FHC-09 Mild SteelECON-FHC-10 Stainless Steel02 Thickness1.2mm03 InstallationSurface Mounted04 FinishingRed Powder Coted / Brush / Mirror05 HingesPush pin, PianoModel No Type Size (mm)ECON-FHC-09 Surface Mounted 800 (h) X 1100 (w) X 300 (d)ECON-FHC-10 Surface Mounted 800 (h) X 1100 (w) X 300 (d)Options:• Door with wired glass available.• All recessed type cabinets are with architrave.• The products specified in this brochure are subject to continual development and improvement.• Information in this brochure is subject to alteration without notice.• All dimensions in mm unless otherwise specified.• Thickness of cabinet can be changed upon on request.Self Standing Fire Hose CabinetsTechnical SpecificationNo01 MaterialMild Steel02 Thickness1.2mm03 InstallationSelf-Standing Outdoor04 FinishingECON-FHC-07 Red Powder Coted05 HingesPush pin, PianoModel No Type Size (mm)ECON-FHC-11 Self Standing Type 1000 (h) X 800 (w) X 300 (d) with 600 high legsEME/F/V/14/00EME/F/V/14/00Note : The products specified in this brochure are subject to continual development and improvement. Information in this brochure is subject to alteration without notice.All dimensions in mm unless otherwise specified.Fire Fighting Product Catalogue AJ-03-001 page page 14137

ECON Fire Hose ReelsSwing Pipe Fire Hose ReelFeaturesSide plates are red epoxy powder coatedAutomatic hose reel has integrated stop valveThreaded inlet connectionTechnical SpecificationNo Model No Type Hose Size01 ECON-FHR-001 Automatic Swing Pipe 25mm dia X 30 M long02 ECON-FHR-002 Manual Swing Pipe 25mm dia X 30 M longDimensionsA B C625mm555mm600mm520mm260mm310mmAccessoriesLock Shield Valve; Pressure Reducing Valve, Pressure Gauge, Nozzle.Swing Arm Fire Hose ReelTechnical SpecificationNo Model No Type Hose Size01 ECON-FHR-003 Automatic Swing Arm 25mm dia X 30 M long02 ECON-FHR-004 Manual Swing Arm 25mm dia X 30 M longDimensionsA B C555mm555mm570–580mm570–580mm260mm230mmAccessoriesAngle Hose valve, Nozzle.EME/F/V/14/00EME/F/V/14/00Note : The products specified in this brochure are subject to continual development and improvement. Information in this brochure is subject to alteration without notice.All dimensions in mm unless otherwise specified.Fire Fighting Product Catalogue AJ-03-001 page 137 15 15

ECON Fire Hose ReelsFixed Fire Hose ReelTechnical SpecificationNo Model No Type Hose Size01 ECON-FHR-005 Manual Fixed25mm dia X 30 M longDimensionsA B C720mm 555mm 260mmAccessoriesGate valve, Ball valve, Nozzle.Fire Hose RackTechnical SpecificationNo Model No Type Hose Size01 ECON-FHRS-01 Hose Rack40mm dia X 30 M long02 ECON-FHRS-02 Hose Rack65mm dia X 30 M longDimensionsA B C688mm798mm550mm700mm650mm750mmAccessoriesAngle Valve, Coupling, Pin Rack, Bracket, NozzleEME/F/V/14/00EME/F/V/14/00Note : The products specified in this brochure are subject to continual development and improvement. Information in this brochure is subject to alteration without notice.All dimensions in mm unless otherwise specified.Fire Fighting Product Catalogue AJ-03-001 page page 16137

ECON Fire HoseSingle Jacket Fire HoseTechnical SpecificationNo01 MaterialPolyester single jacket interior protection hose with EPDM inner liner02 ColorWhite or Red03 CouplingsBrass/Aluminum BS04 Standard Length 30 MeterModel No Size Test Pressure (psi)ECON-FHS-01 40mm 150,250ECON-FHS-02 65mm 150,250Burst Pressure450,750450,750Double Jacket Fire HoseTechnical SpecificationNo01 MaterialDouble jacket hose is constructed of high tensile strength -polyester yarns, lined with a high-tech EPDM tube02 ColorWhite or Red0304CouplingsStandard LengthBrass/Aluminum BS30 Meter05 Temperature Rating 58º F to 176º F (-50º C to 80ºC)Model No Size Test Pressure (psi)ECON-FHRS-03 40mm 150,250ECON-FHRS-04 65mm 150,250Burst Pressure450,750450,750EME/F/V/14/00EME/F/V/14/00Note : The products specified in this brochure are subject to continual development and improvement. Information in this brochure is subject to alteration without notice.All dimensions in mm unless otherwise specified.Fire Fighting Product Catalogue AJ-03-001 page 137 17 17

ECON Landing ValveLanding Valve - FlangedTechnical SpecificationNo01 Type2-1/2" Oblique Landing Valve Flange Type02 ModelECON-LV-0103 MaterialHand wheel: Cast IronBody: BrassInlet: 65MM Flange endOutlet: Female instantaneous to BS336 With Plastic Cap& Chain04 Pressure Rating PN1605 ColorRedLanding Valve - ThreadedTechnical SpecificationNo01 Type2-1/2" Oblique Landing Valve Threaded Type02 ModelECON-LV-0203 MaterialHand wheel: Cast IronBody: BrassInlet: 65MM Threaded endOutlet: Female instantaneous to BS336 With Plastic Cap& Chain04 Pressure Rating PN1605 ColorRedEME/F/V/14/00EME/F/V/14/00Note : The products specified in this brochure are subject to continual development and improvement. Information in this brochure is subject to alteration without notice.All dimensions in mm unless otherwise specified.Fire Fighting Product Catalogue AJ-03-001 page page 18137

ECON Gate ValvesDuctile Iron Gate ValveFeaturesResilient Wedge OS&Y200 / 300 PSIUL ListedFM ApprovedAWWA C515Flanged drilled to ANSI B16.1 CL 125 FFModel No: GYOSY E200 / 300Material SpecificationNo C omponent Material01 BodyDuctile Iron ASTM A536 Gr.65-45-1202 WedgeDuctile Iron ASTM A536 Gr.65-45-12, EPDM Encapsulated03 Wedge NutStainless Steel04 GasketEPDM05 StemBrass0607080910111213BonnetO-RingPackingHand WheelBolts and NutsPacking GlandYoke NutLock NutStainless SteelDuctile Iron ASTM A536 Gr.65-45-12EPDMGraphiteDuctile Iron ASTM A536 Gr.65-45-12Carbon SteelDuctile IronBronze ASTM B62 C83600Ductile Iron ASTM A536 Gr.65-45-12, Chrome Plated******Sizes (mm) 65 80 100 150 200 250 300 350 400 450 500* 600****Available in 200 psi (for size 14” to 24”), UL Listed onlyAvailable in 250 psi (for size 14” to 18”), UL Listed onlyNote: 250 psi is available as an option (for smaller sizes) & subject to minimum quantityDuctile Iron Gate ValveFeaturesResilient Wedge NRS200 / 300 PSIUL ListedFM ApprovedAWWA C515Flanged drilled to ANSI B16.1 CL 125 FFModel No: GVNRS E200 / 300Material SpecificationNo C omponent Material01 BodyDuctile Iron ASTM A536 Gr. 65-45-1202 WedgeDuctile Iron ASTM A536 Gr. 65-45-12, EPDM Encapsulated03 Disc NutBronze04 GasketEPDM0506070809StemBonnetNPT PlugThrust CollarGlandStainless SteelDuctile Iron ASTM A536 Gr. 65-45-12Brass B16 C36000Bronze ASTM B62 C83600Ductile Iron ASTM A536 Gr. 65-45-1210 Wrench NutDuctile Iron ASTM A536 Gr. 65-45-1211 Indicator Post Flange Ductile Iron ASTM A536 Gr. 65-45-1212 Indicator Flange Bolts Stainless Steel13 Body Bonnet BoltCarbon Steel******Sizes (mm) 65 80 100 150 200 250 300 350 400 450 500* 600*EME/F/V/14/00EME/F/V/14/00***Available in 200 psi (for size 14” to 24”), UL Listed onlyAvailable in 250 psi (for size 14” to 18”), UL Listed onlyNote: 250 psi is available as an option (for smaller sizes) & subject to minimum quantityFire Fighting Product Catalogue AJ-03-001 page 137 19 19

ECON Indicator Posts, Check ValvesECON Vertical Indicator PostUL ListedFM ApprovedModel : IP888EMaterial SpecificationNo C omponent Material01 Hex Cap ScrewCarbon Steel ASTM A307B02 Hex NutCarbon Steel ASTM A307B03 Crane CouplingDuctile Iron ASTM A536 Gr.65-45-1204 Cotter PinStainless Steel AISI 304050607080910Base FlangeHex NutHex Cap ScrewStand PipeStem 1" SquareBodyCast Iron ASTM A126 Class BCarbon Steel ASTM A307BCarbon Steel ASTM A307BCarbon Steel ASTM A53Carbon Steel AISI 104Cast Iron ASTM A126 Class B11 Locking WrenchDuctile Iron ASTM A536 Gr.65-45-1212 Target Carrier NutStainless Steel AISI 304 / Bronze ASTM B62 C8360013 Hex Cap ScrewCarbon Steel ASTM A307B14 Hex NutCarbon Steel ASTM A307B15 Hex Cap ScrewCarbon Steel ASTM A307B16 TargetCast Aluminium17 Window GlassPlexiglass18 Gasket19202122 Plug2324Operating NutTop SectionSnap RingSquare NutHex Cap ScrewPTFEStainless Steel AISI 304 / Bronze ASTM B62 C83600Cast Iron ASTM A126 Class BStainless Steel AISI 1066Malleable IronCarbon Steel ASTM A307BCarbon Steel ASTM A307BDuctile Iron Flanged Check ValveFeatures300 PSI / 21 barUL ListedFM ApprovedAWWA C508Flange drilled to ANSI B16.1 CL125FFModel No : ECONCHECK FMaterial SpecificationNo C omponent Material01 Seat Ring Bronze B6202 NPT Plug Brass03 Hinge Pin SS304 AISI 30404 Retainer Washer Bronze B6205 Disc Ductile Iron A536 65-45-1206 Disc Seat EPDM07 Clapper Arm Ductile Iron A536 65-45-1208 Gasket EPDM09 Cover Ductile Iron A536 65-45-1210 Body Ductile Iron A536 65-45-12EME/F/V/14/00EME/F/V/14/00Sizes (mm) 50 65 80 100 125 150 200 250 300Fire Fighting Product Catalogue AJ-03-001 page page 20137

ECON Check Valves, StrainersDuctile Iron Grooved Check ValveFeatures350 PSI / 24 barUL ListedFM ApprovedModel No : ECONCHECK GMaterial SpecificationNoC omponent Material01 Body Ductile iron conforming to ASTMA 536 epoxy coated02 Clapper Stainless Steel SS30403 Clapper Facing EPDM04 Seat Ring Bronze05 Spring Stainless steel SS30406 Hinge Pin Stainless steel SS30407 Plug Carbon SteelSizes (mm) 50 65 80 100 125 150 200Cast Iron StrainerFeatures175 PSI / 12 barUL ListedFlange drilled to ANSI B16.1 CL125FFModel No : YS-F-116 1 EFMaterial SpecificationNo C omponent Material01 Body Cast Iron ASTM A126 Class B02 Cover Cast Iron ASTM A126 Class B03 Screen Stainless Steel AISI 30404 Gasket PTFE/Graphite05 Plug Ductile Iron ASTM A536 Gr. 65-45-1206 Bolts Carbon SteelEME/F/V/14/00EME/F/V/14/00Sizes (mm) 65 80 100 125 150 200 250 300Fire Fighting Product Catalogue AJ-03-001 page 137 21 21

ECON Strainers, Butterfly ValvesDuctile Iron Y StrainerFeatures175PSI / 12 barUL ListedModel No : YS-G-1251 EGMaterial SpecificationNoC omponent Material01 Body Ductile Iron ASTM A536 Gr. 70-50-0502 Cover Ductile Iron ASTM A536 Gr. 70-50-0503 Screen Stainless Steel AISI 30404 Gasket PTFE/Graphite05 Plug Ductile Iron ASTM A536 Gr. 70-50-0506 Bolts Carbon SteelSizes (mm) 65 80 100 150 200 250 300Grooved Butterfly ValvesFeatures175 PSI / 12 barUL ListedFM ApprovedGear operated with factory installed dual tamper switchesModel No : DGMaterial SpecificationNo C omponent Material01 Body Ductile Iron ASTM A536 Nylon Coated02 Disc Ductile Iron ASTM A536 EPDM Encapsulated03 Stem Stainless Steel04 Gear housing Ductile Iron ASTM A536 65-45-12Sizes (mm) 80 100 150 20065EME/F/V/14/00EME/F/V/14/00Fire Fighting Product Catalogue AJ-03-001 page page 22137

ECON AssembliesDuctile Iron Alarm Check Assembly250 PSIComplete With Wet Alarm Trim, Retard Chamber & Water Motor Alarm GongUL ListedFlange drilled to ANSI B16.1 CL125FFModel No : ACV F 250Technical SpecificationNo0102030405060708091011ComponentHousingSeatClapper BushHex. Head BoltRubber ClampRubber SeatClapperHinge PinBody BushCover GasketCoverMaterialDuctile IronBronzeBrassStainless SteelStainless SteelNeoprene RubberDuctile IronStainless SteelBrassNeoprene RubberDuctile IronDia. Sizes (mm) 80 100 150 200Cast Iron Deluge Valve Assembly - Angle Pattern175 PSIComplete with Basic Wet Pilot Trim / Dry Pilot TrimUL ListedFlange drilled to ANSI B16.1 CL125FFModel No : DV A 175 FTechnical SpecificationEME/F/V/14/00EME/F/V/14/00No010203040506070809ComponentHousingSeatClapperRubber SeatRubber ClampBoltDiaphragmClamp RingCoverMaterialCast IronBronzeBronzeNeoprene RubberBronzeStainless SteelNeoprene RubberBronzeCast IronDia. Sizes (mm) 50 80 100 150 200Fire Fighting Product Catalogue AJ-03-001 page page 24137

ECON AssembliesCast Steel Deluge Valve Assembly - Straight Pattern250 PSIComplete with Basic Wet Pilot Trim / Dry Pilot TrimUL ListedFlange drilled to ANSI B16.1 CL125FFModel No : DV H2 250 FTechnical SpecificationNo01020304050607080910111213141516ComponentHousing“O” RingSeatClapperRubber SeatRubber ClampBoltDiaphragmClamp RingSpindleNutLock NutSpringCoverPlugAllen BoltMaterialCast SteelNeoprene RubberBronzeDuctile IronNeoprene RubberBronzeStainless SteelNeoprene RubberBronzeStainless SteelStainless SteelStainless SteelStainless SteelCast SteelSeal PlatedStainless SteelDia. Sizes (mm) 50 80 100 150 200Ductile Iron Deluge Valve Assembly -Straight Pattern250 PSIComplete with Basic Wet Pilot Trim / Dry Pilot Trim.UL ListedFlange drilled to ANSI B16.1 CL125FFModel No : DV H3 250 FTechnical SpecificationEME/F/V/14/00EME/F/V/14/00No01020304050607080910111213141516ComponentHousing“O” RingSeatClapperRubber SeatRubber ClampBoltDiaphragmClamp RingSpindleNutLock NutSpringCoverPlugAllen BoltMaterialDuctile IronNeoprene RubberBronzeDuctile IronNeoprene RubberDuctile IronStainless SteelNeoprene RubberBronzeStainless SteelStainless SteelStainless SteelStainless SteelDuctile IronSeal PlatedStainless SteelDia. Sizes (mm) 50 80 100 150 200Fire Fighting Product Catalogue AJ-03-001 page 137 25 25

ECON PipesCarbon Steel PipesDIN 2440 = BS 1387 Medium (B) = ISO R 65DIN 2441 = BS 1387 Heavy (C) = ISO R 65Available in Seamless / ERW, Black and Galvanized formsERW / Seamless Pipes are in single random lengthsSize & DimensionsNominal PipeSizeOutside DiameterMaximum MinimumInches mm mm mm Kg/m mm Kg/m1/23/411 1/421.727.234.242.921.126.633.442.12.62.63.23.21.211.562.413.103.23.24.04.01.441.872.943.801 1/222 1/23456Outside DiameterWallThicknessPlainEndWallThicknessHeavyPlainEndTestPressurebar5050505048.860.876.689.5114.948.059.875.488.1113.33.23.63.64.04.53.575.036.438.3712.24.04.54.55.05.44.386.197.9310.314.55050505050140.6 138.7 5.0 16.6 5.4 17.9 50166.1 164.1 5.0 19.7 5.4 21.3 50All Econosto brand Pipes come with the Econosto Quality AssuranceMaterial and Test Certificate according to EN 10204-2.2 / DIN 50049-2.2We can also supply Pipes of higher grades API 5L X46/52/60/65/70 and Low Temperature CarbonSteel Pipes A33Seamless Steel Pipes to API 5L Grade B / ASTM A106 Grade B / ASTM A53 Grade B - upto 16"ERW Steel Pipes to API 5L Grade B / ASTM A53 Grade B - upto 24"SAW Steel Pipes to API 5L Grade B / ASTM A53 Grade B - above 24"ERW Pipes Available in Black and Galvanized forms / with 'UL' ListingAvailable in Single / Double random lengthsUpto 1.5"- Plain Square ends ; Above 2" ISO Bevelled endsComparable material Standard BS 3601Dimensions according to ANSI B 36.10 ; Bevelled ends to ANSI B 16.25EME/F/V/14/00EME/F/V/14/00ire Fighting Application/ FFire Fighting Product Catalogue AJ-03-001 page page 26137

FittingsNeffit fittings with UL CertificationNational Ductile iron Grooved fittings with UL & FM CertificationEME/F/V/14/00EME/F/V/14/00irF/ / FFire Fighting Product Catalogue page page 27137 2827

Econosto Mideast b vpage 137 28