User's Manual - AirLive

More documents

Recommendations

Info

3.2.1.4 802.1x Setting-CA ServerParameterDescriptionUse Certificate ChainWhen the EAP authentication type such as TLS, TTLS or PEAP isselected and required a certification to tell the client what servercredentials to accept from the authentication server in order toverify the server, you have to enable this function.Certificate IssuerChoose the server from the list to issue the certificate. If “AnyTrusted CA” is selected, any CA included in the list (provided bythe Microsoft Certificate Store) is permitted.ParameterAllow Intermediate CertificatesDescriptionA server designates an issuer as a trusted root authority byplacing the issuer's self-signed certificate, which contains theissuer's public key, into the trusted root certification authoritycertificate store of the host computer. Intermediate or subordinatecertification authorities are trusted only if they have a validcertification path from a trusted root certification authority.Server NameEnter the authentication server name.Server name must match exactlyWhen selected, the server name must match exactly the servername found on the certificate.Domain name must end inspecified nameWhen selected, the server name field identifies a domain. Thecertificate must use a server name belonging to this domain or toone of its sub-domains (e.g. zeelans.com, where the server isblueberry.zeelans.com) but it may be any name used in thecertificate name field.3.3 Link StatusFrom the “Link Status” option, you can view all the information of the network you are connecting to.20
ParameterStatusDescriptionDisplay the SSID and MAC ID of the network the card isconnecting to.Extra InfoDisplay the link status.ChannelDisplay the number of the radio channel and the frequency usedfor the networking.Link Speed (Mbps)Display the transmission and reception rate of the network. Themaximum transmission rate is 54Mbps.Throughput (Kbits/sec)Display the speed of data transmitted and received.Link QualityThis bar indicates the quality of the link. The higher thepercentage, the better the quality.dBmIf you want to know the signal strength in the unit of dBm, selectthis check box.Signal StrengthThis bar shows the signal strength level. The higher percentageshown in the bar, the more radio signal been received by the card.21
Page 1 and 2: WT-2000PCITurbo-G Wireless LAN Card
Page 3 and 4: during wireless modes of operation.
Page 5 and 6: 1 IntroductionThank you for purchas
Page 7 and 8: 1.3 Package ContentsBefore you begi
Page 9 and 10: B. Insert the Installation CD to yo
Page 11 and 12: F. The system will automatically de
Page 13 and 14: default, this “Windows Zero Confi
Page 15 and 16: ParameterAvailable NetworksDescript
Page 17 and 18: networks will be listed for you to
Page 19 and 20: ParameterAuthentication TypeShared
Page 21 and 22: The IEEE 802.1X specification descr
Page 23: Use Client CertificateA client cert
Page 27 and 28: ParameterDescriptionWireless Mode 8
Page 29 and 30: RADIUS server.When you configure yo
Page 31 and 32: B. Right Click the “Wireless Netw
Page 33 and 34: 4 TroubleshootingThis chapter provi
Page 35: 13. What is Spread Spectrum?Spread

User's Manual - AirLive

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?