You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
EC - Declaration for Machine Components<br />
2<br />
UNIVERSAL DRILLING HEAD <strong>42</strong>/<strong>11</strong><br />
Manufacturer, Place of Production and Sales<br />
<strong>Grass</strong> GmbH<br />
<strong>Grass</strong> Platz 1<br />
A-6973 Höchst<br />
Austria<br />
Product:<br />
<strong>Grass</strong> <strong>Universal</strong> <strong>Drilling</strong> <strong>Head</strong> <strong>42</strong>/<strong>11</strong> with 4 drill spindles<br />
General:<br />
In accordance with EC Guideline 98/37 EC, last altered by Guideline 98/97 EC the above named<br />
manufacturer declares that the above named product meets the relevant, fundamental health and safety<br />
requirements of the EC guideline and assumes sole responsibility to this effect.<br />
The gear attachment may only be put into operation on the following conditions:<br />
The machine on to which the gear attachment is fitted must have a multi-spindle gear with at least<br />
2 spindles at a distance of 32 mm.<br />
The machine on to which the gear attachment is fitted must meet the regulations set out in the EC<br />
machine guideline.<br />
The following norms have been used to ensure that the health and safety requirements set out in the EC<br />
guidelines are properly carried out.<br />
harmonised European norms EN 292-1<br />
EN 292-2<br />
EN 294<br />
Höchst 2000-<strong>11</strong>-29<br />
Dipl.Ing. Jürgen Ahlfeld Dipl.Ing. Jörg Becker<br />
Engineering Manager Quality Control Manager<br />
The star in your cabinet
Change language