13.07.2015 Views

instructions for installation, use and maintenance rais ... - Robeys Ltd

instructions for installation, use and maintenance rais ... - Robeys Ltd

instructions for installation, use and maintenance rais ... - Robeys Ltd

SHOW MORE
SHOW LESS

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

First usageA careful start pays off. Start with a small fire, so that the wood burning stove can getaccustomed to the high temperature. This gives the best start <strong>and</strong> any damage isavoided.Be aware that a strange but harmless odour <strong>and</strong> smoke concoction may emanate fromthe surface of the stove, the first time you fire up. This is beca<strong>use</strong> the paint <strong>and</strong>materials need to harden. The odour disappears quickly, but you should check theventilation <strong>and</strong> draught, if possible. See also, the IMPORTANT warning notice belowabout persistent fumes.During this process you must be careful not to touch the painted surfaces, <strong>and</strong> it isrecommended that you regularly open <strong>and</strong> close the door to prevent the door seal fromsticking.The stove may also produce "clicking noises" during heating <strong>and</strong> cooling, ca<strong>use</strong>d by thelarge temperature differences which the material is subjected to.Never <strong>use</strong> any type of liquid fuel <strong>for</strong> kindling or maintaining the fire. You could be at riskof explosion.The stove gets very hot when in <strong>use</strong>, always wear protective gloves when tending thestove.If the stove has not been <strong>use</strong>d <strong>for</strong> a while, follow the steps as if you were using it <strong>for</strong> thefirst time.IMPORTANT ­ Warning Note!Properly installed, operated <strong>and</strong> maintained this appliance will not emit fumes into thedwelling. Occasional fumes from de­ashing <strong>and</strong> re­fuelling may occur.However, persistent fume emission is potentially dangerous <strong>and</strong> must not be tolerated.If fume emission does persist, the following immediate actions should be taken:(a) Open doors <strong>and</strong> windows to ventilate room.(b) Let the fire out or eject <strong>and</strong> safely dispose of fuel from the appliance.(c) Check <strong>for</strong> flue or chimney blockage, <strong>and</strong> clean if required.(d) Do not attempt to relight the fire until the ca<strong>use</strong> of the fume emission has beenidentified <strong>and</strong> corrected. If necessary seek expert advice.IMPORTANT ­ Warning Note!Do not <strong>use</strong> an aerosol spray on or near the stove when it is alight.IMPORTANT ­ Safety advice!When using the stove in situations where children, aged <strong>and</strong>/or infirm persons arepresent a fireguard must be <strong>use</strong>d to prevent accidental contact with the stove. Thefireguard should be manufactured in accordance with BS 8423:2002(Replaces BS 6539).

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!