ATLANTIC 46 Pilothouse - manager

HULLRoundbilge, the hull and the superstructure are made of aluminum ALMG 4,5type 5083, H116/H321/W28 (american bureau of shipping). The extrusions aremade of aluminum type 50ST and 51ST.The hull skin plates are made of 6mm aluminium and deck, superstructure andpilothouse are made of 5mm aluminium. The keel casing is made of 10mm andengine supports of 15mm aluminium. Ballast: lead in keel and bilge, total 4,7tons. The rudder system (two balance rudders) with Jefa self-aligning heavyduty bearing system. Atlantic sailing yachts are build according the highest CEstandards(Ocean class) for pleasure yachts.DECK ANDSUPERSTRUCTUREINSULATIONENGINE ROOMThe complete superstructure, pilothouse, deck and cockpit are made ofaluminium, which makes this a very strong construction together with thealuminium roundbilge hull. The cockpit is selfdraining through generous ductsand opening to the swimming platform. This yacht pilothouse provides anexcellent comfort and shelter at sea.The inside of the ship is complete insulatedwith 40 mm polyurethane hard foaminsulation (closed cell structure) fromfloor upwards, fireclass B2.The main engine is mounted on antivibrationmounts and engine room insideis installed with Mercoform combinationsheet. This sheet insulates ánd absorbsat the same time. The engine room isdesigned to ensure good access to theengine. There are pipes installed to ensuregenerous fresh air circulation.2