GPS Plus Collar Manager - Vectronic Aerospace GmbH

Doc. No.: GPS Plus Collar Manager
Date: 7.3.12
VECTRONIC Aerospace
Figure 76: Configuration of GPS Tracking Time
4.4.3.3 Activity
Depending on your collar type and the firmware version, you can select different activity
measurement modes (Figure 77).
Figure 77: Configuration of Collar Activity Mode
1 – 300s Activity Measurement: The acceleration on the X and Y axis is stored in
296 s intervals, the time series is regularly corrected to 300 s intervals.
2 – 152s Activity Measurement: This mode measures activity over a sampling interval of 152
seconds.
3 – 64s Activity Measurement: This mode measures activity over an interval of 64 seconds; it
is the smallest storing interval available.
4 – Activity Measurement: Accumulated activity is measured for a predefined interval;
intervals can be chosen in 8 second steps.
5 – Head Angle / Acceleration Threshold: This mode measures two parameters and stores
them in two channels:
1. Head Angle / Head up: Gives the ratio of measurements on the X axis within one
sampling interval in which the head exceeds a user-defined angle towards the vertical
axis.
This design is the property of VECTRONIC Aerospace GmbH. Unauthorized duplication or distribution to a third party is prohibited.
VECTRONIC Aerospace 94 /235 Manual_GPS-Plus-Collar-Manager-V3.11.3.docx