GPS Plus Collar Manager - Vectronic Aerospace GmbH

Doc. No.: GPS Plus Collar Manager
Date: 7.3.12
VECTRONIC Aerospace
Figure 150: Send Terminal GPS Schedule main window (FW >= 2.X)
7.1.5 Send VHF Beacon Schedule
This command is identical to 7.1.4 Send GPS Schedule command. Refer to this chapter for
reference.
7.1.6 Send Proximity Schedule (firmware 2.3.1 or higher)
This command is equivalent to 7.1.4 Send GPS Schedule.
7.1.7 Send GSM/Iridium Schedule (firmware 2.3.1 or higher)
This command allows you to send a GSM/Iridium schedule to a Handheld Terminal. Press
Select to load a GSM/Iridium schedule file (.GSF) into the form. Select a collar ID from the
Terminal Collar drop down list. This list only contains collars that are registered on the
terminal. If you want to upload a GSM/Iridium schedule for an unregistered collar, you first
need to configure the terminal (see 6.4.3 Manage Data). You can only upload the schedule for
one collar in this process, repeat it if you need to upload schedules for more than one collar.
Figure 151: Upload GSM/Iridium Schedule dialog
7.1.8 Receive GPS/Iridium Schedules
To check the GPS schedules stored on a Handheld Terminal, they can be downloaded. A
Window will open while waiting for connection with the terminal. If no connection can be
established, the command will be aborted. After connection has been established the main
window for the download will appear (see Figure 152).
This design is the property of VECTRONIC Aerospace GmbH. Unauthorized duplication or distribution to a third party is prohibited.
VECTRONIC Aerospace 152 /235 Manual_GPS-Plus-Collar-Manager-V3.11.3.docx