Complete (13 MB) - Chris Alston's Chassisworks
Complete (13 MB) - Chris Alston's Chassisworks
Complete (13 MB) - Chris Alston's Chassisworks
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Installing SubframeConnectorsThe subframe connector options include:5602-20 – For OEM rear frame rails5602-21 – For <strong>Chassisworks</strong> rear frame rails5602-32 – Bolt-in center support (not shown)For this installation, we have the car on ourlift.You can install them with the car on jackstands under the front and rear of the rockerpanels. The car should be at least 14inches off the ground.So there is no tension on the leaf springs,use a second pair of jack stands as supportfor the rear-axle housing. You can nowremove the driver side shock absorber.Page 96 917703