Complete (13 MB) - Chris Alston's Chassisworks
Complete (13 MB) - Chris Alston's Chassisworks
Complete (13 MB) - Chris Alston's Chassisworks
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Add a drop of Loctite to the threads, upnear the shoulder and insert the studsthrough the proper series of holes. Theprovided 12-point bolts are 2 1/4 incheslong. If you need a longer wheel stud forthicker wheels, 3-inch long studs areavailable from <strong>Chassisworks</strong>.Tighten the studs from the backside of theassembly. You're ready to install the innerwheel bearing and seal.The bearing races are pressed in the billethub from the factory. You must pack thewheel bearing before installing it. In thephoto, a wheel-bearing packer is shown. Ifyou do not have one available, hand packingthe bearing is okay. If you are unsure howto pack the bearing, refer to an auto repairmanual for assistance.Page 44 917703