Flygt Compit Pump Stations brochure - Water Solutions

Flygt Compit pump stationsThe complete package for wastewater transport

’One’ pump station for singleor multi-family housingQuick installationThe Compit is a prefabricated pumpstation for sewage, pressurized sewagesystems and groundwater.Compit is complete on delivery andready for installation and immediateconnection.ø 816ø 785Concrete coverThe pump station is made of rotomouldedpolyethylene and is easy tohandle. Its weight excluding the pumpis between 181 and 244 kg, dependingon the version.Cable entryDN10075Flexible designThe Compit pump station stands 1.9mhigh and each pump station can beequipped with one or two pumps foradded security of operation.140min 1865Reliable operationThe bowl-shaped bottom and smoothinner surface of the pump station act asbenching to provide self cleaning duringoperation.14301050Inlet775ø 160Technicalities that matter• The pump is easily installed by lowering it onto the discharge connection.ø 1200• All internal discharge piping is stainless steel and all fittings are made of surface-treated cast iron.• Check valve and shut-off valve.• Concrete cover with lifting handle.• Loading options of Class A (Pedestrian) or Class B (5 Tonnes).• Stainless steel lifting chain.• DN 150 inlet.• The outlet pipe is equipped with a DN 50 connection.• Flygt ENM-10 float switches supplied as standard.

The right Flygt pumps andcontroller for CompitGrinder pumps with cutting impellerfor sewageFlygt submersible grinder pumps such as the 3068and 3102 have an impeller unit designed specially forhandling the rigours of wastewater pumping. Withcomponents made of chromium-alloy and stainlesssteel, a cutting impeller grinds particles until theymeasure no more than 5 x 15 mm, thus eliminating therisk of clogging. The fine slurry can then be pumpedthrough pipes measuring just50 mm in diameter. Thesepumps can be run intermittentlywith up to 30 starts per hour,and can handle liquids attemperatures up to 40°C.Control panelsFlygt panels have been adapted for controlling pumpswith Flygt’s ENM-10 level regulators. The units aredesigned for fast installation and setup. With theirsteel housing and an exterior finish that has beenspecified for the tough environment typical in pumpstations, these Flygt control panels will provide years ofreliable service.Flygt ENM-10 float switchThe ENM-10 float switch can beused to regulate a liquid leveland/or to indicate the presence ofliquid in a sump (tank, well, etc.). Itis resistant to sewage water, grease,oil and will be reasonably protectedagainst the majority of chemicals.• Main switch• Motor protection switch and contactor• Hand/off/auto mode selector• Operating and overload indicators• Temperature relay• DOL or Y/D starting• Automatic alternation for dual pumpsPumps for greywater and groundwaterFlygt submersible 3045 and 3057 sewage pumpsare suitable for greywater from baths, showers andwashing machines. Both are made of cast iron andhighly wear-resistant.Flygt DX groundwater pumpsfeature stainless steel pumpand motor casings.All pumps in this range canbe supplied with a channelor vortex impeller.

What can ITT Water & Wastewater do for you?Print Code: 06/08 Compit pump station Edition 2.1kIntegrated solutions for fluid handling are offered by ITT Water & Wastewater as a worldleader in transport and treatment of wastewater. We provide a complete range of water,wastewater and drainage pumps, equipment for monitoring and control, units forprimary and secondary biological treatment, products for filtration and disinfection, andrelated services. ITT Water & Wastewater, headquartered in Sweden, operates in some140 countries across the world, with our own plants in Europe, China and North andSouth America. The company is wholly owned by the ITT Corporation of White Plains,New York, supplier of advanced technology products and services.www.ittwww.co.ukITT Water & Wastewater Head OfficeColwickNottinghamNG4 2ANTel: 0115 940 0111Fax: 0115 940 0444Email: flygtgb@flygt.comRegistered Company No: 479504