IXP20 Web Interface User Manual - NO access
IXP20 Web Interface User Manual - NO access IXP20 Web Interface User Manual - NO access
1System SettingsInstalling Java Runtime Environment (JRE)1. Using Windows® Internet Explorer go to www.java.com.2. On the Home Page, click on the Free Java Download button.3. Click the Install button.4. At the Java Setup – Welcome dialog, click the Accept > button.5. At the Java Setup – Complete dialog, click the Finish button.6. Close Internet Explorer.7. Restart your PC.Starting the IXP20 Web InterfaceOver a LANDo NOT open more than 1 instance of the Web Interface perController. When using the Web Interface with the TouchScreen Controller, ensure the screen is locked.If the Web Server resides on a Port other than Port 80, theURL becomes: http://ixp20:XX/. The XX highlighted in theURL refers to the new Port number.If your Controller connects direct to the PC, refer to page 24for information on accessing the Web Interface.1. In your Internet Browser go to http://ixp20/.2. At the Security Warning, click the Run button.3. Click the OK button.4. Select a location in which to save the Backup. Backup takes placeautomatically at startup, retaining the 5 most recent backups.ISC306-0-0-GB-01 August 2010 Page 2
5. Click the Open button.Over a WANWhen the Web Interface loads, it tries to connect to the Controller usingthe hostname and the Controller’s configured port. This hostname isonly valid on the LAN. If the Web Interface tries to connect to theController from another network or across the internet, provide therouter with a public static IP Address or a dynamic hostname andconfigure port forwarding.1. In your internet browser go to http://ixp20/.2. At the Controller Connection Error dialog, click the Yes button.3. Enter the Hostname or IP Address for the Controller.4. Click the OK button.5. Enter the Host Port for the Controller.6. Click the OK button.The next time you load the Web Interface on the same computer, loggedin as the same user, the values used for the alternative Hostname andalternative Host Port load as defaults into the Hostname and Host Porttextboxes.Date or Time Setup1. From the Main Menu, select System>Date/Time.2. Synchronise the IXP20 Controller’s Date and Time to your PC byclicking the button.3. Set the Start and End Date for Daylight Savings using thebuttons.4. Set the time that Daylight Savings takes effect using the SwitchTime textbox.5. Set the duration of the Daylight Savings time shift using the ShiftDuration textbox.6. Click the button.ISC306-0-0-GB-01 August 2010 Page 3
- Page 1: IXP20 (Web Interface)USER MANUALSco
- Page 5 and 6: 2. With the Door Tab selected, in t
- Page 7 and 8: Figure 2 - Door Mode Patterns Dialo
- Page 9 and 10: Figure 3 - Access Groups Dialog2. C
- Page 11 and 12: 1. From the Main Menu, select Syste
- Page 13 and 14: Normal—employee Tagholder, access
- Page 15 and 16: 4. Based on the similarity of the s
- Page 17 and 18: 3 ReportsView Reports1. From the Ma
- Page 19 and 20: Live Transaction ViewerViewing Live
- Page 21 and 22: EthernetFigure 10 - Ethernet Settin
- Page 23 and 24: 3. Complete the With textbox referr
- Page 25 and 26: When connecting the Controller dire
- Page 27 and 28: User NotesISC306-0-0-GB-01 August 2
1System SettingsInstalling Java Runtime Environment (JRE)1. Using Windows® Internet Explorer go to www.java.com.2. On the Home Page, click on the Free Java Download button.3. Click the Install button.4. At the Java Setup – Welcome dialog, click the Accept > button.5. At the Java Setup – Complete dialog, click the Finish button.6. Close Internet Explorer.7. Restart your PC.Starting the <strong>IXP20</strong> <strong>Web</strong> <strong>Interface</strong>Over a LANDo <strong>NO</strong>T open more than 1 instance of the <strong>Web</strong> <strong>Interface</strong> perController. When using the <strong>Web</strong> <strong>Interface</strong> with the TouchScreen Controller, ensure the screen is locked.If the <strong>Web</strong> Server resides on a Port other than Port 80, theURL becomes: http://ixp20:XX/. The XX highlighted in theURL refers to the new Port number.If your Controller connects direct to the PC, refer to page 24for information on <strong>access</strong>ing the <strong>Web</strong> <strong>Interface</strong>.1. In your Internet Browser go to http://ixp20/.2. At the Security Warning, click the Run button.3. Click the OK button.4. Select a location in which to save the Backup. Backup takes placeautomatically at startup, retaining the 5 most recent backups.ISC306-0-0-GB-01 August 2010 Page 2