View Tender Document - e-Tendering

72Dy.Ex.Engr.l) When persons are employed on a rood wherethere is a danger of failing from a heightexceeding 2 meters ( to be specified ) suitableprecautions shall be taken to prevent the fall ofpersons or materials.m) Suitable precautions shall be taken to preventpersons being struck by articles which might fallfrom scaffolds or other working places.n) Safe means of access shall be provided to allworking platforms and other working places.o) The Contractor/(s) will have to make payments tolabourers as per Minimum Wages Act 1948.Clause 21- (B) – The Contractor shall comply with thefollowing regulations as regards the Hoisting Appliances tobe used by him:-a) Hoisting machines and tackles, including theirattachments, anchorages and supports shalli) be of good mechanical construction, soundmaterial and adequate strength and free frompatent defect,andii) be kept in good repair and in good working order.b) Every rope used in hoisting or lowering materials oras a means of suspension shall be of suitablequality and adequate strength and free frompatent defect.c) Hoisting machines and tackles shall be examinedand adequately tested after erection on the siteand before use and be re-examined in position atintervals to be prescribed by the Government.d) Every chain, ring, hook, shackle, swivel and pulleyblock used in hoisting or lowering materials or asa means of suspension shall be periodicallyexaminede) Every crane driver or hoisting appliance operatorshall be properly qualified.f) No person who is below the age of 21 years shallbe in control any hoisting machine, including anyscaffold which give signals to the operator.g) In case of every hoisting machine and of everychin, ring, hook, shackle, swivel and pulley blockused in hoisting or lowering or as a means ofsuspension, the safe working load shall beascertained by adequate means.h) Every hoisting j machine and all gear referred to inpreceding regulation shall be plainly marked withthe safe working load.Signature of the Contractor No. of Corrections Executive Engineer