View Tender Document - e-Tendering

148Dy.Ex. Engr.plus 12 mm. For 25 mm., 20 mm. and 12 mm. standard size and standard size plus 6mm. for 10 mm. standard sizes.The pieces shall be roughly cubical in shape and more or less of uniform sizewith sharp edges for interlocking, rounded flaky, thin elongated pieces shall not beaccepted. Before collection , samples of metal and chips shall be got approved forquality, size and shape by the Engineer who will keep them in his office for reference.They shall be completely any at the time of use.Rd 41.3.3 Conveyance : According to Specification No. Rd 19.3.3Rd 41.3.4 Stocking : According to Specification No. Rd. 22.3.4 wherever amixture of aggregates of two or more standard sizes is specified for the work, eachsize of aggregates shall be stacked separately and entirely clear of the carriagewayand where possible clear of the shoulders also. They shall be stacked in such amanner as to prevent mixture, deterioration or contamination.Rd 41.4 Special points : According to Specification No. Rd. 19.4Rd 42.5 Item to include : Crushing aggregates to the specified sizes fromapproved rubble and other items included in Specification No. Rd 19.5Rd 42.620.6.Mode of measurement and payment according to Specification No. Rd.As the rate is based on consumption of bitumen at the rate of 250 Kg/ 100Sq.m. , it will be reduced in case of B.B.M. suffer by deducting cost of 50 Kg/bitumenper 100 Sq.m. for the rate specified in Schedule "B".Signature of Contractor No. of corrections Executive Engineer