[Instruction] Contents

Advanced Function InstructionFUN143 PPSCNVCONVERT THE CURRENT PULSE VALUE TO DISPLAY VALUE(mm, Deg, Inch, PS) (Brief description on function)FUN143 PPSCNVPs : 0~3; it converts the number of the pulse position to bethe mm (Deg, Inch, PS) that has same unit as the setvalue, so as to make current position displayed.D : Register that stores the current position afterconversion. It uses 2 registers, e.g. if D = D10, whichmeans D10 is Low Word and D11 is High Word.OperandPsRangeHR DR ROR KR0∣R3839D0∣D4095R5000∣R8071D ○ ○ ○2∣2560 ~3Command descriptions• When execution control “En” =1 or “EN↑”( P instruction) changes from 0→1, this instruction will convertthe assigned current pulse position (PS) to be the mm (or Deg, Inch, or PS) that has same unit as the setvalue, so as to make current position displaying.• Only when the FUN140 instruction is executed, then it can get the correct conversion value by executingthis instruction.• For detailed functional description and usage, please refer to chapter 13 “The NC positioning control ofFBs-PLC” for explanation.7-119