13.07.2015 Views

SeaStar cat/pontoon steering - Jamestown Distributors

SeaStar cat/pontoon steering - Jamestown Distributors

SeaStar cat/pontoon steering - Jamestown Distributors

SHOW MORE
SHOW LESS

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

hydraulic <strong>steering</strong>, <strong>cat</strong>amaran/<strong>pontoon</strong> outboardsRealignmentInstructions:FIGURE 2 -PIVOT MOUNTCYLINDER(TOE OUT)PORTSTAR BOARDEngines Toed Outwards(propellers too far apart):1. Turn the wheel hard over to Starboard.(Both cylinders move; cylinder B reacheshard over fi rst).2. Open the valve.3. Continue to turn the wheel hard over toStarboard. (Only cylinder A moves andreaches hard over).4. Close the valve.Engines Toed Inwards(propellers too close together):1. Turn the wheel hard over to Port.(Both cylinders move; cylinder B reacheshard over fi rst).2. Open the valve.3. Continue to turn the wheel hard over toPort. (Only cylinder A moves and reacheshard over).4. Close the valve.FIGURE 3 -SIDE MOUNTCYLINDER(TOE OUT)FIGURE 4 -PIVOT MOUNTCYLINDER(TOE IN)LIQUID TIE BARVALVECYL. ACYL. B1 4 3 2PROPPORTLIQUID TIE BARVALVEPROPSTAR BOARDCYL. ACYL. B1 4 3 2PROPPORTPROPSTAR BOARDHYDRAULIC STEERING <strong>SeaStar</strong> O/BNOTE: Due to the potential for leakage across thepiston seals, it is possible for the engines to get outof synchronization. We are unable to predict, dueto circumstances beyond our control, the frequencythat misalignment may occur, therefore enginealignment should be checked and corrected asrequired before leaving the dock.CAUTION: Side Mount or Unbalanced Cylinders,such as <strong>SeaStar</strong> cylinder HC5370 can only be usedwith the valve by re-orienting the port engine tilttube, to allow for mounting cylinder on the port (left)side of the port engine. Cylinder rods must face eachother.WARNING: The use of a standard helm at highspeed (55 MPH+) or a high load, e.g.: full throttleforward/reverse, may cause a vacuum in the liquidtie bar and cause engine/rudders to misalign,resulting in momentary loss of <strong>steering</strong> control.This will not occur if a <strong>SeaStar</strong> Pro Helm Pump(part # HH5770) is used.FIGURE 5 -SIDE MOUNTCYLINDER(TOE IN)LIQUID TIE BARVALVECYL. ACYL. B1 4 3 2PROPPORTLIQUID TIE BARVALVEPROPSTAR BOARDCYL. ACYL. B1 4 3 2<strong>SeaStar</strong>, BayStar & Hynautic Products: 604-270-6899 • www.telefl exmarine.com115

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!