KM Static Mixer - ptmg.hr

HEVSTATIC MIXERSHEV high-efficiency static mixershandle all turbulent-flow mixingapplications regardless of line sizeor shape. Mixing is accomplished bycontrolled vortex structuresgenerated by the patented lowprofiletab geometry. This providesuniform blending while limitingmixer length to less than 1-1/2pipe diameters. Complete mixingis achieved with pressure losses75% less than conventionalstatic mixers.Typical applications for the HEVinclude all low-viscosity liquid-liquidblending processes, as well as gasgasmixing. The HEV is ideal forprocesses where pressure loss andlength are critical.HEV Static Mixerfeatures include:• Lowest pressure drop available• Unlimited sizes and shapes• Shortest possible mixer length• Easy retrofit to existing lines• Available in all metals and alloys,FRP, PVC, PFA, and epoxycoatedsteel• Low cost, wafer design is availablefor installation between flangesHEV static mixers provide installationflexibility and can be configured tosquare, rectangular or 3-sided ducts.They are adaptable to open channelstypically found in water treatmentsystems.5

SPECIAL PURPOSEPRODUCTSIn addition to our standard staticmixer line, Chemineer manufacturesa range of productsdesigned to meet your specializedprocess requirements.Sanitary Mixers• Polished internal and externalsurfaces• Removable element assembliesfor fast, easy cleaning• Fitted with tri-clamp-style ferrules• Available in five diameters from1/2" to 4"• 316L construction materials• Meet 3A standards• BPE option availableHeat Exchangers• Used for process applications,including polymers, plastics,adhesives, hydrocarbonprocessing, and food industries• Effective for both heating andcooling of viscous fluids• Three-to-ten times greatertransfer rates than empty tubes• Boosts heat transfer with minimalflow disruption• Custom fabrication toASME/TEMA standards• Request Bulletin 808Tube Mixers• Used for applications with lowflow rates in full-scale and pilotplant operations• Exclusive edge-sealed mixingelements attached to housing wall• Plain ends accommodate awide variety of common fittings• Standard 22-gauge 316SShousings available in diametersfrom 3/16" to 1/2"Tubular Reactors• Continuous plug flow performance• Single or multi-tube construction• Continuous solution phase reactionsand polymerizations• High heat transfer rates with lowpressure dropPilot Plant Heat Exchangers• Standard off-the-shelf designfor immediate shipment• Direct scale-up with 100%process warranty• All stainless steel construction• Can be used in pilot plants orslip streams to full-scale processThermogenizers ®• Delivers uniformly mixedmelt for extrusion applications• Offers improved gauge control• No radial temperature gradients• Reduced color concentrateusage by improving mixtureuniformity• One-piece design for easyinstallation and cleaning• Request Bulletin 806No matter what your processneeds or system considerations,Kenics Static Mixers can handleyour mixing requirements.8

PRODUCTAPPLICATIONSKenics Mixers are used in numerousindustries for a variety of blending,dispersion, heat transfer andresidence time control applications.TYPICALAPPLICATIONSAgricultural Chemicals• Fertilizer and pesticide preparation• Gas/liquid dispersion• Dilution of feed concentratesChemicals• Chlorination and oxidation• Organic/aqueous dispersions• Dilution of acids and basesCosmetics• Heating slurries and pastes• Additive blending• Dispersion of oilsEnergy• Chemical addition for enhancedoil recovery• Injection of geothermal steam• Preheating coal/oil slurries• NOX/SOX controlFoods• Blending food constituents• Washing fats and oils with acid• Heating and cooling sugar solutions• Starch slurry cookingPharmaceuticals• Nutrient blending• pH control• SterilizationGrain Processing• Starch conversion• Chemical addition• Mud dilution• Steam injectionMinerals Processing• Metals recovery bysolvent extraction• Chemical addition and pH control• Oxidation and bleachingOEM• Adhesive and epoxy dispensingsystems• Adhesives heating• Monitoring and sampling systemsPaints & Resins• Dilution of TiO 2 slurries• Coloring and tinting• Solvent blendingPetrochemical & Refining• Blending gaseous reactants• Washing hydrocarbon streams• Gas scrubbing• Lube oil blending• Crude oil samplingPolymers & Plastics• Blending reactants & catalysts• Thermal homogenization• Plug flow finishing reactors• Preheating polymers prior todevolatizationPulp & Paper• Stock dilution and consistency control• Chemical and coatings preparation• pH control• Pulp bleachingRubber Processing• Blending latex compounds• Adding pre-polymersand activators• Heating and cooling adhesivesTextiles• Blending additives• Eliminating thermal gradients• Heating and cooling polymers• Achieving uniform heat historyWater & Waste Treatment• Polymer dilution• pH control• Chemical addition and flash mixing• Disinfection and aeration10

Tel: 978-687-0101 Fax-Back Process Analysis Form FAX: 978-687-8500E-mail: nav.inquiry@robn.comB800Name_______________________________________________________ Title__________________________Address_____________________________________________________ Phone________________________City_________________________________________________________ FAX__________________________State/Zip____________________________________________________ E-Mail________________________Process Description:Mixing or DispersionDate________________ Items_______ of______Item ref. __________________________________________________________________Units Stream 1 Stream 2 Stream 3 MixtureComponent Name ____________ ____________ ____________ ____________Flow Rate ____________ ____________ ____________ ____________ ____________Density ____________ ____________ ____________ ____________ ____________Viscosity ____________ ____________ ____________ ____________ ____________Temperature ____________ ____________ ____________ ____________ ____________Pressure ____________ ____________ ____________ ____________ ____________Liquid/Gas/Solids ____________ ____________ ____________ ____________Process Requirement: ■ Blending ■ Dispersion ■ Reaction ■ Residence TimeComponents Miscible: ■ Yes ■ No Interfacial Tension:______________Required Droplet/Bubble Size:______________________ Allowable Pressure Drop:______________________Process Description:Heating/CoolingSpecific Thermal FlowGravity T, in T, out Viscosity Sp. Heat Cond. RateProcess Fluid ________ ______ ______ ________ ________ ________ ______________Heating/Cooling Fluid ________ ______ ______ ________ ________ ________ ______________Allowable Pressure Drop: Jacket____________ Tube______________Mechanical DesignMaterial of Construction:_________________________ Existing Line Size:______________________________End Connections: ■ Plain ■ THD ■ Flanged Type:__________ Class:_________________________Design Temperature:____________________________ Design Pressure:_______________________________Other Process Details/Special Requirements:____________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________Commercial Requirements:Pricing: ■ Budgetary ■ Immediate PurchaseDelivery Requirement:____________________________Response needed by: ■ Today ■ Tomorrow■ One Week ■ Other______Comments: ______________________________________________________________________________________________________________________________________________

Chemineer, Inc. is part of the family of businesses thatcomprise the Fluid Management Group of Robbins &Myers, Inc. The Robbins & Myers Fluid ManagementGroup is a leading provider of innovative fluid managementsolutions that deliver superior performance,long service life and exceptional value. The Groupbrings together its global resources — engineering,manufacturing, application expertise and cuttingedge,proprietary technology — to deliver high quality,dependable products, effective system solutionsand responsive support services to benefit customersworldwide.Satisfying a broad range of application needs, theFluid Management Group focuses its resources onthe oil and gas discovery and recovery, chemicalprocess, water and wastewater, food, biofuels,pulp and paper, pharmaceutical and numerousother industries.The Fluid Management Group’s parent company,Robbins & Myers, Inc., supplies highly-engineered,critical equipment and systems for global energy,industrial, municipal, chemical and pharmaceuticalmarkets. Robbins & Myers provides innovativeproducts, application engineering expertise, customersupport and a competitive cost structure that createvalue for its customers.Chemineer, Inc.P.O. Box 1123Dayton, Ohio 45401Telephone: (937) 454-3200Fax: (937) 454-3379www.chemineer.comChemineer, Ltd.7 Cranmer RoadWest MeadowsDerby DE21 6XTEnglandTelephone: 44-1332-363175Fax: 44-1332-290323Chemineer, Inc.125 Flagship DriveNorth Andover, MA 01845Telephone: (978) 687-0101Fax: (978) 687-8500www.kenics.comwww.greercomixers.comYour Local Contact:Chemineer InternationalSales Offices:BrazilMexicoSingaporeChinaIndiaBulletin 800For the nearest sales office call 1-800-643-0641 or go to www.chemineer.com© 2009 by Chemineer, Inc.® Chemineer, Kenics, Greerco, Prochem, Thermogenizer and CEDS are registered trademarks of Chemineer, Inc.Chemineer, Inc. is a part of the Fluid Management Group of Robbins & Myers, Inc.Printed in U.S.A.3.5M PPI 1109