You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
4 Installation Procedure4.2.2 Fitting the Flue Support Bracketa) Fix the flue support bracket to the wall using the screws provided as shown inFigure 4/C.4.2.3 Fitting the Connection Adaptersa) Assuming that the service connections are to be completed using copperpipework, fit the threaded connectors (supplied) to the pipe connections asappropriate.Figure 4/C: Fitting the Flue Support Bracket4.3 Fitting the BoilerNOTE: This step can be delayed until immediately prior to system commissioning if sitesecurity cannot be guaranteed. If this option is required, isolate the service connections andcontinue with the system installation procedure described in the following sections, includingchecking the soundness of the system, flushing and cleaning, then return to this section later.a) Unpack the boiler and remove the outer casing by removing the two lowerfixing screws, pulling forward and lifting clear of the appliance. Place theouter casing in a safe place until after installation (Figure 4/D), stand theappliance in a vertical position.24
Change language