Reson Seabat 8101

Interface Specification Document6.3.1.20 Freeze• DESCRIPTION:This message freezes the data in the wedge on the sonar screen.• SYNTAX:*FREZ,N• PARAMETERS:N – Freeze selection. 0 for OFF and 1 for freeze.• EXAMPLE:*FREZ,1This example freezes the data on the screen.6.3.1.21 Force Wet Download (8101 / 8111 only)• DESCRIPTION:This message forces the 81-P to download the new firmware into the sonar head bypassingthe version number verification check.• SYNTAX:*FWET,N• PARAMETERS:N – Download mode0 – Stop the download1 – Begin download using method 1 (good uplink required)2 – Begin download using method 2 (uplink not required)• EXAMPLE:*FWET,1This example forces a wet download when a good uplink is available.6.3.1.22 Manual Gain• DESCRIPTION:This message sets the manual gain for the 81-P processor.• SYNTAX:*GAIN,N• PARAMETERS:N – Manual gain value.• EXAMPLE:*GAIN,1This example sets the 81-P processor to the minimal manual gain, 1.6.3.1.23 Grid• DESCRIPTION:This message sets different grid options.• SYNTAX:*GRID,N• PARAMETERS:N – Grid value.0 – Off, no grid.1 – Just the border.2 – Border and lines.3 – Full.• EXAMPLE:*GRID,1This example sets the processor to display only the border around the wedge.______________________________________________________________________SeaBat 8101 Operator's Manual 6-12 (ISD Rev 1.23) Version 3.02