Reson Seabat 8101

Interface Specification Document6.3.1.13 Dot Check (bathy only)• DESCRIPTION:This message controls the bottom detection dots on the sonar screen.• SYNTAX:*DCHK,N• PARAMETERS:N – Dots selection.0 – Off. (No dots.)1 – Normal. (Displays all dots except those of poor quality.)2 – All. (Displays all dots in white, even the quality dots.)3 – Quality. (Displays all dots, color-coded with quality.)4 – Process. (Displays all dots, color-coded depending on the bottom detectionalgorithm.)• EXAMPLE:*DCHK,0This example turns the dots Off.6.3.1.14 Maximum Depth Filter (bathy only)• DESCRIPTION:This message sets the maximum value for the depth filter.• SYNTAX:*DMAX,N• PARAMETERS:N – Max depth filter [m]. The parameter go from 0 m to max range, but higher or equalthan to the minimum depth filter settings.• EXAMPLE:*DMAX,100This example sets the maximum depth filter value to 100 m.6.3.1.15 Minimum Depth Filter (bathy only)• DESCRIPTION:This message sets the minimum value for the depth filter.• SYNTAX:*DMIN,N• PARAMETERS:N – Min depth filter [m]. The parameter go from 0 m to max range, but less or equal to themaximum depth filter setting.• EXAMPLE:*DMIN,10This example sets the minimum depth filter value to 10 m.______________________________________________________________________SeaBat 8101 Operator's Manual 6-10 (ISD Rev 1.23) Version 3.02