13.07.2015 Views

Reson Seabat 8101

Reson Seabat 8101

Reson Seabat 8101

SHOW MORE
SHOW LESS

Create successful ePaper yourself

Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.

System Operationconnection allows for much higher transmission ratesof the data packets.3.9.3 ProfileBdThis menu selection controls the baud rate for the data packets when the systemis in the RS-232 output mode. The baud rates available are 1200, 2400, 4800,9600, 19200, 38400, 57600, and 115200. See Chapter 6 for additional details.3.9.4 TimeBdThis menu selection controls the input baud rate for time synchronization packetsfrom a data acquisition system. The baud rates available are 1200, 2400, 4800,9600, 19200, 38400, 57600, and 115200. See Chapter 6 for additional details.3.9.5 ContrlBdThis menu selection controls the input baud rate for control messages from anexternal program. The baud rates available are 1200, 2400, 4800, 9600, 19200,38400, 57600, and 115200. See Chapter 6 for additional details.3.9.6 MotionBdThis menu item selects the baud rate to match the input form the Motion ReferenceUnit (MRU) (e.g. TSS, RESON VRU, Seatex, etc.) The baud rates availableare 1200, 2400, 4800, 9600, 19200, 38400, 57600, and 115200. See Chapter 6for additional details.3.9.7 VelctyBdThis menu item selects the baud rate to match the input from a CTD sensor. Thebaud rates available are 1200, 2400, 4800, 9600, 19200, 38400, 57600, and115200. See Chapter 6 for additional details.3.9.8 UDP BaseThis item allows the operator to define the base UDP Port number for Ethernetcommunications. Enter the "base" UDP port number and the other required portswill be selected automatically. As an example: assume that the UDP base number"N" is 1028. Then, as shown below, N+1 = 1028+1 = 1029.N+0 UDP_PORT_BATHY Bathymetry data outputN+1 UDP_PORT_SIDESCAN Sidescan data outputN+2 UDP_PORT_CONTROL Remote control of menu itemsN+3 UDP_PORT_ALARM Status message outputN+4 UDP_PORT_SNAPSHOT Snapshot data outputN+5 UDP_PORT_RAW Special data outputN+6 UDP_PORT_SNIPPETS Snippets data output8100 UDP_PORT_DOWNLOAD Firmware download input**** this port is unaffected by the base UDP number.______________________________________________________________________SeaBat <strong>8101</strong> Operator's Manual 3-12 Version 3.02

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!