Reson Seabat 8101

Interface Specification Document6.3.1.47 Time• DESCRIPTION:This message sets the processor time (not used for time stamping any data).• SYNTAX:*TIME,HH,MM,SS• PARAMETERS:HH – Hour, 0 – 23.MM – Minute, 0 – 59.SS – Second, 0 – 59.• EXAMPLE:*TIME,13,42,1The example sets the Processor time to 13:42:01.6.3.1.48 UTC-Time Baud Rate• DESCRIPTION:This message controls the IN baud rate for serial port 1. The port IN receives UTC-timedata.• SYNTAX:*TMBR,N• PARAMETERS:N – Baud rate. Different speeds are 1200, 2400, 4800, 9600, 19200, 38400, 57600,115200.• EXAMPLE:*TMBR,19200This message sets the In baud rate on serial port 1 to 19200.6.3.1.49 Test Pattern• DESCRIPTION:This message tells the 81-P processor to output a test pattern. The test pattern representsa flat seafloor and a bump moving from beam to beam.• SYNTAX:*TPAT,N• PARAMETERS:N – Test pattern value. 1 Turns the test pattern ON, any other value turns it OFF.• EXAMPLE:*TPAT,1The message sets the test pattern ON.6.3.1.50 Uplink• DESCRIPTION:This message selects the uplink port.• SYNTAX:*UPLK,N• PARAMETERS:N – Uplink port.0 – COAX 1.1 – COAX 2.2 – FIBER 1.3 – FIBER 2.• EXAMPLE:*UPLK,1The example tells the processor to receive uplink on port coax 2.______________________________________________________________________SeaBat 8101 Operator's Manual 6-20 (ISD Rev 1.23) Version 3.02