Reson Seabat 8101

Interface Specification Document6.3.1.43 CTD Baud Rate• DESCRIPTION:This message controls the IN baud rate for downlink port 1. The port IN receives CTDdata.• SYNTAX:*SVBR,N• PARAMETERS:N – Baud rate. Different speeds are 1200, 2400, 4800, 9600, 19200, 38400, 57600,115200.• EXAMPLE:*SVBR,9600 This example sets the IN baud rate on downlink port 1 to 9600.6.3.1.44 Version• DESCRIPTION:This message returns the wet end and dry end software version.• SYNTAX:*SVER• PARAMETERS:N/A• EXAMPLE:*SVERThe message returns *SVER,????-????-????,????-????-????, where the??? are the version numbers.6.3.1.45 Synchronization• DESCRIPTION:This message selects the synchronization method between the 81-P processors.• SYNTAX:*SYNC,N• PARAMETERS:N – Synchronization Value.0 – Stand-alone.1 – Slave.2 – Master.• EXAMPLE:*SYNC,0The example sets the 81-P processor to stand-alone.6.3.1.46 Head Tilt (bathy only)• DESCRIPTION:This message sets the head tilt angle.• SYNTAX:*TILT,N• PARAMETERS:N – Tilt angle from –180° to +180°.• EXAMPLE:*TILT,-1The example sets the tile angle to -1°.______________________________________________________________________SeaBat 8101 Operator's Manual 6-19 (ISD Rev 1.23) Version 3.02