Reson Seabat 8101

Interface Specification Document6.3.1.27 Network• DESCRIPTION:This message sets the different network addresses used and the UDP Port.• SYNTAX:*NADR,N,PARAM• PARAMETERS:N – Type of address to set.0 – Local IP address (processor box).1 – Remote IP address (data collection system).2 – UDP port.3 – Gateway IP address (router).4 – Subnet mask.PARAM – The Param is dependent of the Type.Type 0 – IP address (XXX.XXX.XXX.XXX)Type 1 – IP address (XXX.XXX.XXX.XXX)Type 2 – UDP port (XXXXX)Type 3 – IP address (XXX.XXX.XXX.XXX)Type 4 – Subnet mask (XXX.XXX.XXX.XXX)• EXAMPLE:*NADR,1,10.0.1.245This example sets the 81-P processor IP address to 10.0.1.245.6.3.1.28 Power• DESCRIPTION:This message sets the sonar transmitter power.• SYNTAX:*POWR,N• PARAMETERS:N – The power value.• EXAMPLE:*POWR,0This message sets the power to OFF.______________________________________________________________________SeaBat 8101 Operator's Manual 6-14 (ISD Rev 1.23) Version 3.02