You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
<strong>COLLET</strong> <strong>CHUCKS</strong>Why Buy A Collet Chuck?Collet chucks can be easily installed on almost any CNC lathe, whether it is new or old.They can be interchanged with 3 jaw chucks or installed permanently, dependingon the jobs required. Here are some other advantages of a collet chuck:• Gripping force is spread over the entire circumference of theworkpiece instead of being concentrated at just three points.• Jobs can be run at higher RPMs because collet chucks are notas vulnerable to the negative effects of centrifugal force.• Collet chucks offer better tool clearance and easier access to workpeice.• Collet changeover time is usually faster than changing chuck jaws.• No boring of jaws is required.• Collet chucks usually have much less mass than 3 jaw chucks, reducing wearon machine tool spindle bearings and allowing for quicker starts and stops.• Collets are readily available.Collet Chuck Applications:Bar feeding/Bar pulling • Slug work • Small diameter work less than 3”Twin or subspindle machines • Delicate thin-walled partsHigh RPM applications• Parts that require extra tool clearance for machiningCNC PULLBACK <strong>COLLET</strong> <strong>CHUCKS</strong>For 5C,16C & 3J ColletsFEATURES:• A simple, low-cost method for utilizing colletson all CNC lathes and turning centers.• Pullback design.• 0.0003" TIR guaranteed.• Body hardened to Rc61-63 for rigidity• Accepts 5C,16C & 3J collets and tooling.CLATHE <strong>CHUCKS</strong>LIVE CENTERSVISE JAWSVISE ACCESSORIESSTRAIGHT SHANK<strong>COLLET</strong> HOLDERSColletType5C16C3JSpindleCap.ThreadedNoseA B C D EMaxDrawbarForce (lbs.)MaxClampingForce (lbs.)U S <strong>Shop</strong> <strong>Tools</strong> Sales: 800-243-7701 Fax: 800-342-3311 www.usshoptools.comMaxRPMPartNumberA2-5 1-1/16 N 2.63 5.00 6.45 1.05 3.14 4,490 15,750 6,000 ROY-42053 $988.00A2-5 1-1/16 Y 2.187-10 5.00 6.45 1.22 3.14 4,490 15,750 6,000 ROY-42054 $1,111.50A2-6 1-1/16 N 2.63 5.00 7.45 1.05 3.14 4,490 15,750 6,000 ROY-42055 $1,168.50A2-6 1-1/16 N 2.63 6.00 7.45 1.05 3.14 4,490 15,750 6,000 ROY-42057 $1,301.50A2-6 1-1/16 Y 2.187-10 6.00 7.45 1.22 3.14 4,490 15,750 6,000 ROY-42058 $1,406.00A2-8 1-1/16 N 2.63 6.00 9.45 1.05 3.14 4,490 15,750 4,500 ROY-42059 $1,434.50A2-5 1-5/8 N 3.00 6.00 6.45 1.85 3.31 5,390 19,800 6,000 ROY-42067 $1,235.00A2-6 1-5/8 N 3.25 6.00 7.45 1.54 3.78 5,390 19,800 6,000 ROY-42069 $1,301.50A2-8 1-5/8 N 3.25 6.00 9.45 1.54 3.78 5,390 19,800 4,500 ROY-42071 $1,425.00A2-5 1-3/4 N 3.08 6.00 6.45 1.16 3.33 5,390 19,800 6,000 ROY-42061 $1,273.00A2-6 1-3/4 N 3.25 6.00 7.45 1.05 3.87 5,390 19,800 6,000 ROY-42063 $1,377.50CNC ACCU-LENGTH <strong>COLLET</strong> <strong>CHUCKS</strong>For 5C, 16C & 3J ColletsFEATURES:• Exclusive Accu-Length system eliminates part pullback.• Guaranteed max. closing sleeve runout relative tomounting recess is 0.00025".• Patented floating collet retainer improves concentricity.• Accepts all standard 5C and 16C accessories & tooling.• Ideal for sub-spindle applications.• Collet wrench and oiler included with chuck.ColletType5C16C3JSpindleTypeCap. A B C D EMax DrawbarForce (lbs)Max ClampingForce (lbs)MaxRPMPartNumberA2-5 1-1/16” 2.43 5.75 6.45 1.00 4.00 4,000 13,600 6,000 ROY-42330 $3,448.50A2-6 1-1/16” 2.43 5.75 7.45 1.00 4.00 4,000 13,600 6,000 ROY-42332 $3,600.50A2-5 1-5/8” 3.25 6.25 6.45 1.03 3.90 5,400 18,300 6,000 ROY-42338 $3,771.50A2-6 1-5/8” 3.25 7.00 7.95 1.03 4.48 5,400 18,300 6,000 ROY-42340 $3,895.00A2-8 1-5/8” 3.25 7.75 9.45 1.03 4.48 5,400 18,300 4,500 ROY-42342 $4,02800A2-5 1-3/4” 3.25 6.00 6.45 1.03 3.97 5,400 26,300 6,000 ROY-42344 $3,895.00A2-6 1-3/4” 3.25 6.50 7.95 1.03 4.48 5,400 26,300 6,000 ROY-42346 $4,028.00A2-8 1-3/4” 3.25 7.25 9.45 1.03 4.48 5,400 26,300 4,500 ROY-42348 $4,161.00PricePrice2014-15 Master Catalog 91TAP HOLDERSDRILL <strong>CHUCKS</strong>CARBIDE INSERTSTHREADING/GROOVINGCUTTING TOOLSMACHINERYPRECISION TOOLSDEBURRINGCOOLANT/FLUIDSTOOL STORAGE
CHUCK JAWSLATHE WORKHOLDINGMACHINE VISESVISE JAWSRETENTION KNOBSER, DA, TG <strong>COLLET</strong>STOOLHOLDERSTAP HOLDERSINDEXABLE DRILLSTURNING & BORING<strong>COLLET</strong> <strong>CHUCKS</strong>CNC PULLBACK <strong>COLLET</strong> <strong>CHUCKS</strong>For 16C & 5C ColletsFEATURES:• 5C collets readily available.• 16C collet chucks are populardue to their capacity (1.625”).• 5C and 16C systems availablewith step chuck capability.• Step chuck capacities rangefrom 2” to 6” in diameter.WARNING: Do not use manual jaw chucks, fixture mountingplates or face plates on ATS 5C threaded nose. Cast iron stepchuck closers are not recommended for speeds greater than 4000RPM or draw bar forces over 5,000 lbs.CNC PULLBACK <strong>COLLET</strong> <strong>CHUCKS</strong>For “J” Style ColletsFEATURES:• Uses precision collets for greater T.I.R.• Short collet design reduces collet chuck’soverall length.• Uses affordable industry standard collets.• “J” style’s 7° closing taper allows forgreater gripping power.DescriptionSpindleMADE IN THE* * * * * * *USAOALA16C (Utilizes standard 16C collets)B C Cap.PartNumberPriceA5-16C A2-5 6.250 6.450 3.400 1.625 ATS-1650-B05 $1,035.50A5-16C S/C A2-5 6.250 6.450 5.450 1.625 ATS-1650S-D10 $1,795.50A6-16C A2-6 6.250 7.450 4.000 1.625 ATS-1660A-D01 $1,175.00A8-16C A2-8 6.500 9.450 5.375 1.625 ATS-1680A-A17 $1,320.505C (Utilizes standard 5C collets)A5-5CA1 A2-5 3.500 (1) 6.450 2.000 1.062 ATS-5050-A04 $845.50A5-5CB A2-5 5.000 6.450 2.180 1.062 ATS-5050-B01 $990.00A5-5CB1 A2-5 5.000 (1) 6.450 2.180 1.062 ATS-5050-B02 $890.00A5-5CA A2-5 3.500 6.450 2.180 1.062 ATS-5050-B03 $940.50A6-5C1 A2-6 5.000 (1) 7.450 2.250 1.062 ATS-5060A-A05 $1,035.50A6-5CA A2-6 5.000 7.450 2.180 1.062 ATS-5060A-C01 $1,130.50AB-5C1 A2-8 6.000 (1) 9.450 2.250 1.062 ATS-5080A-A14 $1,227.88AB-5C A2-8 6.000 9.450 2.180 1.062 ATS-5080A-A13 $1,225.50140MM-5C1 140 MM 5.500 (1) 7.450 2.200 1.062 ATS-50140-A155 $1,130.50(1) - Non Threaded Nose S/C - Step Chuck CapabilityFull Line Available!Please call for more information.OALDescription SpindleA3J (Utilizes standard 3J collets)MADE IN THE* * * * * * *USAB C Cap.PartNumberPriceA5-3J A2-5 5.750 6.450 3.400 1.750 ATS-3050-B07 $1,035.50A6-3J A2-6 6.000 7.450 4.000 1.750 ATS-3060A-D03 $1,190.00A8-3J A2-8 6.000 9.450 5.370 1.750 ATS-3080A-F17 $1,320.50140MM-3J 140 MM 6.000 6.450 3.750 1.750 ATS-30140-B175 $1,130.50AENDMILLS, DRILLSTAPS & REAMERSLOW PROFILE TRUE LENGTH <strong>COLLET</strong> <strong>CHUCKS</strong>For 5C, 16C & 3J ColletsFEATURES:• Adjustable feature for T.I.R. and concentricity.• Fixed collet position increases linear precision.• Ideal for secondary operations, sub-spindleapplications and part transfers.• Small body design provides for greater toolclearance, Z-axis travel and rigidity.MADE IN THE* * * * * * *USAABRASIVESMEASURING TOOLSMRO & SAFETYFLAT STOCK/DRILL RODDescription SpindleU S <strong>Shop</strong> <strong>Tools</strong> Sales: 800-243-7701 Fax: 800-342-3311 www.usshoptools.com92 2014-15 Master CatalogOALAB C Cap.PartNumber5C (Utilizes standard 5C collets)750AG05-50 A5-5CTL A2-5 5.740 6.450 2.500 1.062 ATS-750AG0550 $3,030.50750AG5-60 A6-5CTL A2-6 5.750 7.450 2.500 1.062 ATS-750AG560 $3,390.00750AG05-80 A8-5CTL A2-8 7.000 8.450 2.500 1.062 ATS-750AG0580 $3,410.5016C (Utilizes standard 16C collets)716AK40-60 A6-16CTL A6 7.000 7.000 3.250 1.625 ATS-716AK4060 $3,990.00716AK40-80 A8-16CTL A8 7.750 8.450 3.250 1.625 ATS-716AK4080 $3,980.503J (Utilizes standard 3J collets)730AH05-60 A6-3JTL A2-6 6.500 7.000 3.250 1.750 ATS-730AH0560 $3,790.50730AH05-80 A8-3JTL A2-8 7.250 8.450 3.250 1.750 ATS-730AH0580 $3,980.50Price
“S” STYLE <strong>COLLET</strong> <strong>CHUCKS</strong>CNC PULLBACK <strong>COLLET</strong> <strong>CHUCKS</strong>For S-Style Collets• Simply change collet pads to hold differentpart diameters.• Collet pads also available-see pages 100-101.• S-Type collet chucks include master collet,wrench, mounting hardware and custommachineddrawtube adapter.ColletTypeSpindle Cap. A B CCNC TRUE LENGTH <strong>COLLET</strong> <strong>CHUCKS</strong>For “S” Style Collets• Fixed collet position ensures linear accuracy• “S” style is common in automatic screw andturret type machines.• Utilizes standard “S” style collet pads-see page 100.• Reduced body diameter and elimination of the nosecap allows for greater tool clearance• S35 and S40 collet chucks also available. Pleasecall for more informationChuckWeightDescription SpindleMax DrawbarForce (Lbs.)Max GrippingForce(Lbs.)MADE IN THE* * * * * * *USAOAL Flange NoseA B CU S <strong>Shop</strong> <strong>Tools</strong> Sales: 800-243-7701 Fax: 800-342-3311 www.usshoptools.comMaxRPM2014-15 Master Catalog 93Cap.S20 (Utilizes special S20 master collets- included in price)PartNumberPriceA5-S20TLS A2-5 6.375 7.950 4.435 2.000 ATS-732ASJ5550 $4,550.50A6-S20TLS A2-6 6.375 7.950 4.435 2.000 ATS-732ASJ5560 $4,550.50A8-S20TLS A2-8 7.058 8.450 4.435 2.000 ATS-732ASJ5580 $4,550.50S26 (Utilizes special S26 master collets- included in price)A5-S26TLS A2-5 7.000 7.375 5.500 2.625 ATS-726ASC31850 $4,740.50A6-S26TLS A2-6 7.000 7.375 5.500 2.625 ATS-726ASC31860 $4,740.50A8-S26TLS A2-8 7.170 8.450 5.500 2.625 ATS-726ASC31880 $4,740.50S30 (Utilizes special S30 master collets- included in price)PartNumberS-20 Master A2-6 2" 4.40 5.57 7.45 17 lbs 6,000 14,700 6,000 ROY-45110 $3,068.50S-26 Master A2-6 2-5/8" 5.75 6.25 7.45 21 lbs 6,500 15,925 6,000 ROY-45112 $3,296.50S-26 Master A2-8 2-5/8" 5.75 6.25 9.45 42 lbs 6,500 15,925 4,500 ROY-45114 $3,429.50S-30 Master A2-8 3" 5.75 6.53 9.45 53 lbs 7,000 17,150 4,500 ROY-45116 $3,553.00CNC PULLBACK <strong>COLLET</strong> <strong>CHUCKS</strong>For “S” Style Collets• “S” style is common in automaticscrew and turret type machines.• Utilizes standard “S” style colletpads-see page 100-101.CNC ACCU-LENGTH <strong>COLLET</strong> <strong>CHUCKS</strong>For “S” Style Collets• Exclusive Accu-Length system eliminates part pullback.• Guaranteed max. closing sleeve runout relative tomounting recess is 0.00025".• Patented floating collet retainer improves concentricity.• Ideal for sub-spindle applications.• Collet wrench and oiler included with chuck.• Master collet included on S-Type collet chucks.ColletTypeSpindleTypeCapacity A B C D EColletSeriesSpindleMADE IN THE* * * * * * *USAOAL Flange NoseA B CPriceA6-S30TLS A2-5 6.625 8.450 6.097 3.000 ATS-782ASC32150 $5,025.50A6-S30TLS A2-6 6.625 8.450 6.097 3.000 ATS-782ASC32160 $5,025.50A8-S30TLS A2-8 6.705 9.450 6.097 3.000 ATS-782ASC32180 $5,025.50Cap.PartNumberPriceS-20 A2-6 5.575 7.450 4.400 2.000 ATS-42060A-D05 $3,030.50S-20 A2-6 6.750 7.450 4.400 2.000 ATS-42060A-D07 $3,030.50S-22 A2-6 7.250 7.450 5.000 2.250 ATS-42260-E06 $3,030.50S-26 A2-6 5.750 7.450 5.750 2.625 ATS-42660B-E03 $3,220.50S-26 A2-8 7.000 9.450 5.750 2.625 ATS-42680B-D16 $3,410.50S-30 A2-6 6.375 7.450 5.750 3.000 ATS-43060-E08 $3,600.50S-30 A2-8 6.525 9.450 5.750 3.000 ATS-43080A-E15 $3,885.50S-30 A2-8 7.675 9.450 5.750 3.000 ATS-43080A-K05 $3,600.50H - Hardinge HS - Hardinge (Short)Max DrawbarForce (lbs)Max ClampingForce (lbs)MaxRPMPartNumberA2-5 2” 4.81 6.38 7.95 1.30 6.25 6,000 29,300 6,000 ROY-42360 $4,332.00S-20A2-6 2” 4.81 6.75 7.95 1.30 6.25 6,000 29,300 6,000 ROY-42362 $4,645.50S-26 A2-6 2-5/8” 5.50 7.00 7.95 1.50 6.75 8,000 39,100 6,000 ROY-42364 $4,778.50A2-6 3” 6.06 6.62 7.95 1.50 6.75 10,000 48,800 6,000 ROY-42368 $5,206.00S-30A2-8 3” 6.06 6.62 9.45 1.50 6.75 10,000 48,800 4,500 ROY-42370 $5,206.00AAMADE IN THE* * * * * * *USAMADE IN THE* * * * * * *USAPriceCLATHE <strong>CHUCKS</strong>LIVE CENTERSVISE JAWSVISE ACCESSORIESSTRAIGHT SHANK<strong>COLLET</strong> HOLDERSTAP HOLDERSDRILL <strong>CHUCKS</strong>CARBIDE INSERTSTHREADING/GROOVINGCUTTING TOOLSMACHINERYPRECISION TOOLSDEBURRINGCOOLANT/FLUIDSTOOL STORAGE
CHUCK JAWSLATHE WORKHOLDINGMACHINE VISESVISE JAWSRETENTION KNOBSER, DA, TG <strong>COLLET</strong>STOOLHOLDERSTAP HOLDERSINDEXABLE DRILLSTURNING & BORINGENDMILLS, DRILLSTAPS & REAMERSABRASIVESMEASURING TOOLSMRO & SAFETYFLAT STOCK/DRILL ROD<strong>COLLET</strong> <strong>CHUCKS</strong> & ACCESSORIES5C <strong>COLLET</strong> CHUCKFor Mounting With Adapter Plate6,000 RPM, 0.0004” T.I.R.<strong>COLLET</strong> <strong>CHUCKS</strong>For CNC LathesFEATURES:• Adapts CNC lathes for standard 5C, 16Cand 3J collets• Built in concentricity adjustment.• Workholders are actuated by machine closer.• Light weight permits higher turning speeds.• Balanced design for smooth running.• Easy installation! Mounts in less than20 minutes!• Designed for use with 5C collets• High quality forged steel body• For turning, facing, boring, grindingand milling operations on center lathesand grinding machines• Key operated scroll provides uniform,distortion-free clamping• Scroll and pinions are hardened andground for precision and long life5C Collet Chucks-5” DiameterSpindle Part Number PricePlain Back BI-7862-0501 $459.93D1-4 BI-7862-0511 $819.63D1-5 BI-7862-0512 $820.27Plain Back TL* BI-7862-0503 $928.97*Tru-Length: No workpiece movementSUPER PRECISION 5C SET TRU <strong>COLLET</strong> CHUCKWith Fine Adjustment-For Mounting With Adapter Plate6,000 RPM, 0.0004” T.I.R.• Designed for use with 5C collets• High quality forged steel body• For turning, facing, boring, grindingand milling operations on center lathesand grinding machines• Key operated scroll provides uniform,distortion-free clamping• Four fine adjustment screws are used toset up the chuck on it’s mounting plate toget precision within 0.0004” TIR5C Set Tru Collet ChucksChuck Dia RPM Part Number Price5” 6000 BI-7862-0505 $683.245C FRONT HAND WHEEL SPEED <strong>COLLET</strong> <strong>CHUCKS</strong>SpindleMountMADE IN THE* * * * * * *USAU S <strong>Shop</strong> <strong>Tools</strong> Sales: 800-243-7701 Fax: 800-342-3311 www.usshoptools.comColletType94 2014-15 Master CatalogLow Profile & Lightweight Design!• Front Hand Wheel Operation• Reduces Operator Fatigue• Accurate-Maximum cone run out .0005"• Uses 5C Collets• Also available with L, 4° taper, threadedspindles or stationary mount• Easy Installation - No drawtube or speciallinkage required• 1 Year Warranty5C16C3JA B CSpindleCap.ThreadedNose5” Machined Adapter PlatesFor Plain Back ChucksSpindle Part Number PriceA-6 BI-7877-056 $207.03A-8 BI-7877-058 $205.94D1-4 BI-7878-054 $174.26D1-5 BI-7878-055 $174.26D1-6 BI-7878-056 $174.262-3/16-10 BI-7922-053 $116.155” Machined Adapter PlatesSpindle Part Number PriceA-4 BI-7874-054 $205.46A-5 BI-7874-055 $205.46A-6 BI-7874-056 $205.46D1-4 BI-7875-054 $309.17D1-5 BI-7875-055 $333.55D1-6 BI-7875-056 $338.832-3/16x10 BI-7876-054 $159.85PartNumberPartNumberPriceEachPlain Back 9.00” 2.25” 4.25” PBA-PB23-00 $1,195.00D1-4 9.00” 2.25” 4.75” PBA-PB23-D4 $1,450.00D1-5 9.00” 2.25” 4.75” PBA-PB23-D5 $1,475.00D1-6 9.00” 2.25” 4.87” PBA-PB23-D6 $1,475.00A2-5 9.00” 2.25” 4.75” PBA-PB23-A5 $1,475.00A2-6 9.00” 2.25” 4.75” PBA-PB23-A6 $1,475.00PriceEachA5 1 1/16 N DTC-5C-4T-A5 $689.00A6 1 1/16 N DTC-5C-4T-A6 $724.00A6 1 1/16 Y DTC-5CTHD-A6 $779.00A5 1 5/8 N/A DTC-16C-A5 $888.00A6 1 5/8 N/A DTC-16C-A6 $920.00A8 1 5/8 N/A DTC-16C-A8 $935.00A6 1 3/4 N/A DTC-3J-A6 $920.00A8 1 3/4 N/A DTC-3J-A8 $935.00Please add $179.00 for threaded drawtube adapter.B
CHUCK JAWSLATHE WORKHOLDINGMACHINE VISESVISE JAWSRETENTION KNOBSER, DA, TG <strong>COLLET</strong>STOOLHOLDERSTAP HOLDERSQUICK-GRIP <strong>COLLET</strong> <strong>CHUCKS</strong>QUICK-GRIP <strong>COLLET</strong> <strong>CHUCKS</strong>10-SECOND <strong>COLLET</strong> CHANGES!• 10-Second Collet Changes! A unique hook and groove designfor securing collets is used instead of traditional threads• Widest Collet Gripping Range! Royal Quick-Grip collets havea .062” gripping range (+/-0.031”), allowing them to accommodateundersized and oversized bar stock• Ultra-Compact Ddesign-Quick-grip CNC collet chucks havesmaller nose diameters than other quick-change collet chucks forsuperior tool clearance• Royal Quick-Grip collet chucks are balanced by design for high-speedoperation, and can often be run at higher speeds than conventional3-jaw chucks because they are less affected by centrifugal force• Extremely Accurate-Runout on the closing angle is guaranteed tobe within 0.0002” TIR• Quick-Grip collet chucks can also utilize microCentric andHainbuch quick-change collets• Available in Accu-Length or Pullback styles• Made in the USAQUICK-GRIP ACCU-LENGTHCNC <strong>COLLET</strong> <strong>CHUCKS</strong>Royal Accu-Length CNC collet chucksincorporate dead-length operation to eliminatepart pullback. With this design, a tapered sleevepushes forward over the collet to compress it,resulting in precise z-axis positioning.CExclusive “Bolt & Go” Mounting AdvantageOn All Royal Collet Chucks!Many Royal chuck models mount directly to the lathe spindlewithout the need for an adapter plate, However, for models thatdo use a plate, a precision-ground tapered fit between the plate’smale pilot and chuck body’s female recess ensures a consistent,near-perfect fit without the need for any adjustment. Knock 30minutes off your setup time with Royal bolt & Go!INDEXABLE DRILLSTURNING & BORINGENDMILLS, DRILLSTAPS & REAMERSSpindleTypeColletSeriesCap. A B C D EChuckWeightMax.DrawbarForceMaxClampingForceMaxRPMPartNumberA2-5 QG-42 1-5/8 3.86 4.60 6.45 0.98 5.70 15 7,865 14,160 6,000 ROY-44055 $3,100.00A2-6 QG-42 1-5/8 3.86 4.45 7.25 0.98 6.20 217 7,865 14,160 6,000 ROY-44053 $3,100.00A2-5 QG-65 2-5/8 5.50 4.80 6.45 1.40 6.45 27 10,115 18,205 6,000 ROY-44060 $3,496.00A2-6 QG-65 2-5/8 5.50 5.33 7.45 1.40 6.45 33 10,115 18,205 6,000 ROY-44062 $3,496.00A2-8 QG-65 2-5/8 5.50 5.50 9.45 1.25 6.35 44 10,115 18,205 6,000 ROY-44064 $3,952.00QUICK-GRIP PULLBACKCNC <strong>COLLET</strong> <strong>CHUCKS</strong>Royal Pullback CNC collet chucks provide asimple, low-cost method for utilizing Quick-Gripcollets on all CNC lathes and turning centersPriceABRASIVESMEASURING TOOLSMRO & SAFETYFLAT STOCK/DRILL RODSpindleTypeColletSeriesCap. A B C D EChuckWeightMax.DrawbarForceU S <strong>Shop</strong> <strong>Tools</strong> Sales: 800-243-7701 Fax: 800-342-3311 www.usshoptools.com96 2014-15 Master CatalogMaxClampingForceMaxRPMPartNumberA2-5 QG-42 1-5/8 4.11 4.45 6.45 3.50 5.25 11 7,865 14,160 6,000 ROY-44020 $1,900.00A2-6 QG-42 1-5/8 4.11 4.35 7.45 1.50 4.38 13 7,865 14,160 6,000 ROY-44022 $2,042.50A2-5 QG-65 2-5/8 4.88 4.30 6.45 1.50 6.45 19 10,115 18,205 6,000 ROY-44028 $2,156.50A2-6 QG-65 2-5/8 4.88 4.85 7.45 1.50 5.25 17 10,115 18,205 6,000 ROY-44030 $2,156.50A2-8 QG-65 2-5/8 4.88 5.00 9.45 1.50 5.72 26 10,115 18,205 6,000 ROY-44032 $2,669.50Please See Following Page For Quick-Grip Collets And AccessoriesPrice
QUICK-GRIP <strong>COLLET</strong>SQUICK-GRIP <strong>COLLET</strong>S• For use with Royal Quick-Grip Collet Chucks• Precision ground to nominal size, with a gripping range of +/- .031”.For example, a 1/2” collet can hold any part ranging in size from 0.531”diameter down to 0.469” diameter• Extremely accurate-total system accuracy (chuck and collet) of 0.0004”TIR or better• Available with smooth or serrated ID. Hex, square and custom sizesalso available, please call• Vulcanized rubber between collet segments provide excellent sealingprotection against coolant penetrationQG-42 Collets $227.05 EachDiameterSmoothBoreSerratedBoreDiameterSmoothBoreSerratedBoreDiameterSmoothBoreSerratedBore3/16 ROY-44101 - 11/16 ROY-44117 ROY-44166 1-3/16 ROY-44133 ROY-441797/32 ROY-44102 - 23/32 ROY-44118 ROY-44167 1-7/32 ROY-44134 -1/4 ROY-44103 - 3/4 ROY-44119 ROY-44168 1-1/4 ROY-44135 ROY-441809/32 ROY-44104 - 25/32 ROY-44120 ROY-44169 1-9/32 ROY-44136 -5/16 ROY-44105 - 13/16 ROY-44121 ROY-44170 1-5/16 ROY-44137 ROY-4418111/32 ROY-44106 ROY-44155 27/32 ROY-44122 ROY-44171 1-11/32 ROY-44138 -3/8 ROY-44107 ROY-44156 7/8 ROY-44123 ROY-44172 1-3/8 ROY-44139 ROY-4418213/32 ROY-44108 ROY-44157 29/32 ROY-44124 ROY-44173 1-13/32 ROY-44140 -7/16 ROY-44109 ROY-44158 15/16 ROY-44125 ROY-44174 1-7/16 ROY-44141 ROY-4418315/32 ROY-44110 ROY-44159 31/32 ROY-44126 ROY-44175 1-15/32 ROY-44142 -1/2 ROY-44111 ROY-44160 1 ROY-44127 ROY-44176 1-1/2 ROY-44143 ROY-4418417/32 ROY-44112 ROY-44161 1-1/32 ROY-44128 - 1-17/32 ROY-44144 -9/16 ROY-44113 ROY-44162 1-1/16 ROY-44129 ROY-44177 1-9/16 ROY-44145 ROY-4418519/32 ROY-44114 ROY-44163 1-3/32 ROY-44130 - 1-19/32 ROY-44146 -5/8 ROY-44115 ROY-44164 1-1/8 ROY-44131 ROY-44178 1-5/8 ROY-44147 ROY-4418621/32 ROY-44116 ROY-44165 1-5/32 ROY-44132 -QG-65 Collets $278.35 EachDiameterSmoothBoreSerratedBoreDiameterSmoothBoreSerratedBoreDiameterSmoothBoreSerratedBore3/16 ROY-44201 - 1-1/32 ROY-44228 - 1-7/8 ROY-44255 ROY-443417/32 ROY-44202 - 1-1/16 ROY-44229 ROY-44328 1-29/32 ROY-44256 -1/4 ROY-44203 - 1-3/32 ROY-44230 - 1-15/16 ROY-44257 ROY-443429/32 ROY-44204 - 1-1/8 ROY-44231 ROY-44329 1-31/32 ROY-44279 -5/16 ROY-44205 - 1-5/32 ROY-44232 - 2 ROY-44258 ROY-4434311/32 ROY-44206 ROY-44306 1-3/16 ROY-44233 ROY-44330 2-1/32 ROY-44259 -3/8 ROY-44207 ROY-44307 1-7/32 ROY-44234 - 2-1/16 ROY-44260 ROY-4434413/32 ROY-44208 ROY-44308 1-1/4 ROY-44235 ROY-44331 2-3/32 ROY-44261 -7/16 ROY-44209 ROY-44309 1-9/32 ROY-44236 - 2-1/8 ROY-44262 ROY-4434515/32 ROY-44210 ROY-44310 1-5/16 ROY-44237 ROY-44332 2-5/32 ROY-44263 -1/2 ROY-44211 ROY-44311 1-11/32 ROY-44238 - 2-3/16 ROY-44264 ROY-4434617/32 ROY-44212 ROY-44312 1-3/8 ROY-44239 ROY-44333 2-7/32 ROY-44265 -9/16 ROY-44213 ROY-44313 1-13/32 ROY-44240 - 2-1/4 ROY-44266 ROY-4434719/32 ROY-44214 ROY-44314 1-7/16 ROY-44241 ROY-44334 2-9/32 ROY-44267 -5/8 ROY-44215 ROY-44315 1-15/32 ROY-44242 - 2-5/16 ROY-44268 ROY-4434821/32 ROY-44216 ROY-44316 1-1/2 ROY-44243 ROY-44335 2-11/32 ROY-44269 -11/16 ROY-44217 ROY-44317 1-17/32 ROY-44244 - 2-3/8 ROY-44270 ROY-4434923/32 ROY-44218 ROY-44318 1-9/16 ROY-44245 ROY-44336 2-13/32 ROY-44271 -3/4 ROY-44219 ROY-44319 1-19/32 ROY-44246 - 2-7/16 ROY-44272 ROY-4435025/32 ROY-44220 ROY-44320 1-5/8 ROY-44247 ROY-44337 2-15/32 ROY-44273 -13/16 ROY-44221 ROY-44321 1-21/23 ROY-44248 - 2-1/2 ROY-44274 ROY-4435127/32 ROY-44222 ROY-44322 1-11/16 ROY-44249 ROY-44338 2-17/32 ROY-44275 -7/8 ROY-44223 ROY-44323 1-23/32 ROY-44250 - 2-9/16 ROY-44276 ROY-4435229/32 ROY-44224 ROY-44324 1-3/4 ROY-44251 ROY-44339 2-19/32 ROY-44277 -15/16 ROY-44225 ROY-44325 1-25/32 ROY-44252 - 2-5/8 ROY-44278 -31/32 ROY-44226 ROY-44326 1-13/16 ROY-44253 ROY-443401 ROY-44227 ROY-44327 1-27/32 ROY-44254 -<strong>COLLET</strong> INSTALLATION TOOL• Easy to use tool enables collets to be changed in seconds• Simply insert the steel pins into the collet face holes andsqueeze main trigger to collapse collet• Once collet is positioned within the chuck, squeeze thetrigger lock to expand and release• Heavy -duty construction for durabilityCollet Series Part Number PriceQG-42 ROY-44097 $259.35QG-65 ROY-44098 $522.50U S <strong>Shop</strong> <strong>Tools</strong> Sales: 800-243-7701 Fax: 800-342-3311 www.usshoptools.com2014-15 Master Catalog 97CRoyal Quick-Grip ColletsAre Fully Compatible WithMicroCentric & HainbuchQuick-Change Collets!LATHE <strong>CHUCKS</strong>LIVE CENTERSVISE JAWSVISE ACCESSORIESSTRAIGHT SHANK<strong>COLLET</strong> HOLDERSTAP HOLDERSDRILL <strong>CHUCKS</strong>CARBIDE INSERTSTHREADING/GROOVINGCUTTING TOOLSMACHINERYPRECISION TOOLSDEBURRINGCOOLANT/FLUIDSTOOL STORAGE
Change language