Product Information 2011 - Industrial and Bearing Supplies

Product Information2011Manufacturers of InnovativeOrganic Absorbent Products,Spill Response Kits andSoil Bioremediation TechnologiesFeaturedin theAustralianTechnologyShowcase

Enretech Australasia Pty Ltd.ABN: 62 070 856 414Manufacturing and Head Office:Moss Vale, NSW Australia 2577 Tel: 61 2 4869 3261, Fax: 61 2 4869 3264Mailing Address:P.O. Box 1154 Moss Vale, NSW Australia 2577General Inquiries:info@enretech.com.auInternational Inquiries:johng@enretech.com.auwww.enretech.com.auManaging Director:John Giltrap Mobile: 0425 232 742 johng@enretech.com.auGeneral Manager (Sales and Marketing):Neville Morris Mobile: 0488 232 741 nevillem@enretech.com.auTechnical Services Manager:Chris Aebi Mobile: 0425 232 741 chrisa@enretech.com.auOperations and Logistics Manager:Tony Mozak Mobile: 0425 232 740 tonym@enretech.com.auOffice Manager:Kirstin Mozak kirstinm@enretech.com.auBusiness Development Managers:QLD Daryl Sanderson Mobile: 0488 232 730NSW Chris Aebi Mobile: 0425 232 741T 61 2 4869 3261 F 61 2 4869 3264 info@enretech.com.au www.enretech.com.au

Products and ServicesENRETECH - 1 Soil BioremediationEncapsulates and bioremediates petroleum hydrocarbon liquids in soils. Contains natural, oil-degrading microbes, appropriate nutrientsand a carrier matrix for ensuring rapid biodegradation of hydrocarbons such as motor oils and fuels. No supplements or surfactants are required.Wholly Australian made.KLEEN SWEEP Shop Floors/Road SpillsBiodegradable industrial sorbent for spills of fuels, lubes and other non-polar and polar liquids. Proven to be the most effective sorbent on themarket due to its powerful absorption and adsorption properties. Silica-free, fast acting, one step ‘dry clean’. Will NOT leave a slick on the floor orleach its absorbed liquid. Extensively tested to meet all EPA and WorkCover requirements. Wholly Australian made.CELLUSORB Oil Spills on WaterFor the removal of oils and fuels from water. 100% biodegradable, recycled cellulose sorbent. Absorbs up to 19 times its own weight in oil due toboth absorption and adsorption properties. Wholly Australian made.ABSORBENT SOCKS, BOOMS, & PILLOWS Spill Containment and Clean-upNatural, 100% biodegradable, non-toxic materials for spill containment and absorption. All products contain recycled, highly absorbent, Cellusorb.Available in Oil Only and GP versions. All Cellusorb products are wholly manufactured in Australia.ABSORBENT COTTON PADS, ROLLS & WIPES Clean-up Oil/Fuel on Land or WaterSuperior absorbency of natural, biodegradable cotton in pads or rolls. Cost effective. Absorbs at least 50% more oil per pad than equivalentpolypropylene pads. Most effective when used in conjunction with KleenSweep. An integral part of any spill response system.BETTACLEAN Bio-hazard and Infectious WasteAbsorbs and encapsulates spills involving liquids which pose a risk to infectious agents. Easy to use absorbent and disposable spill kit wherebody fluid spills are common. Eliminates odours, 100% biodegradable, made from recycled cellulose in Australia.SPILL RESPONSE KITS Solvent Free CleaningKits available for workshops and all industrial, commercial, transport and marine applications. Highly absorbent, effective and competitively priced.Available as Oil Only, General Purpose and Hazchem (acids/alkalis) kits. Spill kits can be customised to suit specific requirements, includingDangerous Goods Classes 3, 5, 6.1, 8 and 9.TRAINING Meet your EPA & Workcover Due Diligence RequirementsTraining packages are available to assist your supervisor or on-site trainer with the training of all employees with regard to the management ofliquids and spills in the workplace. Packages range from 15 minute “toolbox” talks to full day training courses.ON-LINE/PHONE TECHNICAL HELP Get Assistance with Technical Matters QuicklyNot sure which sorbent or spill kit is the best fit for the types of chemicals you have? Just call or send us an email, and one of our technical staff willassist you. Staff are qualified and experienced in the management of Dangerous Goods and Hazardous Substances.PO Box 1154 Moss Vale, NSW Australia 2577T 61 2 4869 3261 F 61 2 4869 3264 info@enretech.com.au www.enretech.com.au

DescriptionEnretech-1 is a dual purpose oil/fuel absorbent and bioremediation agent for use on direct spills oron hydrocarbon contaminated soil. The product contains naturally occurring bacteria commonly foundin oil bearing plants and common soils. When given a hydrocarbon food source and kept moist,the bacteria propagate rapidly within the fibres and break down the soil contaminant into itsnon-harmful constituents.ApplicationEnretech-1 is applied by blending the dry absorbent carrying the micro-organisms with thecontaminated soil as thoroughly as possible. Once the hydrocarbon comes in contact with Enretech-1,it will be absorbed and encapsulated by the fibrous active sites. Enretech-1 is dispersed by tilling andthere is no requirement for washing, milling or surfactant addition. Enretech-1 has been usedsuccessfully to clean up many sites. To-date, over 40 recorded projects, conducted in a variety ofcountries (including Australia), show an average reduction in total hydrocarbons (TPH) of 82% in77 days. Most of these remediation projects involved soil contaminated with common petroleumhydrocarbons such as diesel and sump oils. However, Enretech-1 has also proven effective in thein-situ bioremediation of transformer (mineral) oils and has also been shown to bioremediate somePAHs (depending on ring structure) and even synthetic compounds. The Enretech-1 technology canbe applied in both in-situ and ex-situ situations, but is most effective for use in emergency land-basedhydrocarbon spills where conventional remediation treatments are not practical due toenvironmental sensitivities or remoteness.Product Code: ENR010SIZE: 10kg bagPALLET QUANTITY: 72/palletBAG WEIGHT: 10kgBAG DIMENSIONS (cm):36 x 12 x 52Also Available:20L pail ENR011DescriptionThe bacteria in Enretech-1 are common, well-known oil degraders. Using embedded nutrients in thefibrous matrix, the bacteria (and other micro-organisms) cause a rapid bioremediation of thecontaminant compounds. Supplementary nitrogen addition is not usually required, except in heavilycontaminated soils.Nutrients and Bacteria■■■■■■Enretech-1 will not decompose until it has bioremediated the encapsulated hydrocarbons.Proven to bioremediate a wide variety of compounds. Technology verified by University andGovernment testing.Rapid encapsulation and immobilisation eliminates leaching of hydrocarbon.Safe and simple to use - requires no special training and crews are not required to beexpert personnel.Enretech-1 is non-toxic, non-abrasive, noncarcinogenic and non-volatile.Produced from a recycled, natural and renewable resource.Basic Instructions for UseA generic application protocol is available upon request. However, as every bioremediation project isunique, Enretech will work with the client to ensure the most suitable application protocol for a rapid,cost effective and complete site remediation.PO Box 1154 Moss Vale, NSW Australia 2577T 61 2 4869 3261 F 61 2 4869 3264 info@enretech.com.au www.enretech.com.au

Bioremediation of Contaminated SoilsThe Enretech-1 hydrocarbon biodegradation process is an extension of the company’s highly efficient oil and fuel absorbents. These are made fromrecycled cellulose by-products from the Australian cotton industry, as the company has a strict policy of not using virgin raw material when existingwaste sources can be converted.The use of certain portions of cotton by-products allowed the use of the indigenous micro-organisms that exist in this special type of cotton fibre.By engineering a complex nutrient system, we have enhanced a natural process where a powerful wicking action effectively ‘feeds’ the contaminantto the microbes who exist in small, fibrous “active sites”.Effective encapsulation of the hydrocarbons means leachingis essentially eliminated.Refinements over several years of R&D have produced a complex androbust remediation process that transfers easily to different soil typesand climatic conditions. However, because application isstraightforward and non labour intensive, and relatively littlemonitoring is required, it is also a very cost-effective process.No genetic modification or bioengineering of the micro-organismshas taken place.For soil contamination of up to 40,000 ppm of petroleumhydrocarbons, thorough mixing of the absorbent-microbial blendwith single moisture addition is usually sufficient for bioremediationto be completed to compliance level within 1 to 3 months.Higher contamination levels may take between two and six months,depending on the type and age of the hydrocarbons, and the soilstructure. On average, we see around 82% TPH reductions in 77 days. Hydrocarbon sludges can be remediated with regular tilling, the additionof an organic bulking agent and additional nutrients, but will require further additions of Enretech-1 to achieve the fastest possible results.Detailed application protocols are available from Enretech Australasia, upon request.Enretech-1 has been used to successfully bioremediate contaminated soils in a variety of projects in Australia and overseas. A list of projects detailshas been posted on our web site. Most projects involved petroleum hydrocarbons such as used diesel fuel and motor oil, however we have also hadgood success with treating: fuel oil in New Caledonia (above), oil sludges in Kazakhstan, light sweet crude in Mississippi, and oily sludges in the ACT(Figures 1 and 2). Enretech-1 is used extensively by the mining industry in Australia.FIGURE 1 Start of project:bioremediation of sludge pond containing assorted waste oils.FIGURE 2 Final stage of project:bioremediation complete and target levels achieved within 6 months.Enretech-1 was one of the first technologies accredited in to the Australian Technology Showcase (ATS) - a program of NSWDept. of State & Regional Development’s Olympic Business Roundtable. This program was designed to promote Australiantechnologies up to, and during the 2000 Sydney Olympics. It now continues, promoting these technologies throughoutAustralia and the world.Featured in the AustralianTechnology ShowcasePO Box 1154 Moss Vale, NSW Australia 2577T 61 2 4869 3261 F 61 2 4869 3264 info@enretech.com.au www.enretech.com.au

DescriptionKleen Sweep is a multi-purpose particulate absorbent that uses industry-leading,capillary absorbent technology, especially designed for the industrial, commercialand automotive markets. Kleen Sweep is manufactured in Australia from recyclednatural biomass by-products and totally encapsulates and immobilises the spillso that the surface is left clean and dry.ApplicationKleen Sweep is designed for use on all hard surfaces to absorb petrol, oil and diesel spills.It can also be used on animal, vegetable, mineral and synthetic oils, and oil-based paints.One step ‘dry clean’. The product is simply spread around and over the spill, and swept back and forthuntil the surface is dry. The sorbent is then swept aside leaving no surface residue.No secondary detergent or solvent washes are necessary. Kleen Sweep can also be used to absorbwater-based liquids such as body fluids (blood, urine and vomit), food products, paints, andwater-soluble chemicals (ie: glycols).Features and Benefits■■■■■■Biodegradable organic sorbent for spills on all hard surfaces.Suitable for fuels, lubes and a wide range of liquids, including DG Class 3, 6 and 9 liquids.Proven to be the most effective sorbent on the market due to its powerfulFibreLock technology.Completely dries the floor - no secondary clean up required.Encapsulates & eliminates leaching.Tested as per Australian Standards, USEPA, ASTM, ISO, APHA, CGSB and others.■ Proven to outperform clays, polypropylene and sawdust products, some by up to 10x.Product Code: ENR020SIZE: 10kg bagPALLET QUANTITY: 72/palletBAG WEIGHT: 10kgBAG DIMENSIONS (cm): 36 x 12 x 52Product Code: ENR021SIZE: 20L pailPALLET QUANTITY: 48/palletPAIL WEIGHT: 8kgBAG DIMENSIONS (cm): 30 x 30 x 41■ Cost effective. Reduces transportation and disposal costs. Reduces clean up time by 50%.■■■Made in Australia from 97% recycled, organic fibres. 100% biodegradable.Quick, safe and easy to use. Safe to store.Multiple disposal options. Approved for landfill disposal in most jurisdictions.Suitable for Biofarms.Basic Instructions for UseSTEP 1 Starting from the outside edge, spread only enough Kleen Sweep to cover liquid.STEP 2 Sweep back and forth with a stiff broom until liquid is fully absorbed and floor is clean ofany residue.STEP 3 Pick up used sorbent with dust pan. Dispose of all used sorbent materials in accordancewith local regulations.Product Code: ENR022SIZE: 5kg bagPALLET QUANTITY: 96/palletBAG WEIGHT: 5kgBAG DIMENSIONS (cm): 36 x 8 x 47PO Box 1154 Moss Vale, NSW Australia 2577T 61 2 4869 3261 F 61 2 4869 3264 info@enretech.com.au www.enretech.com.au

Standards ComplianceEnretech sorbent have been extensively tested to demonstrate that they meet or exceed all pertinent standards.The tests are summarised as follows:Test NameTestENVIRONMENTAL TOXICITYASTM D5560 (Microtox)TCLP LEACHATE TEST FOR PETROLEUM HYDROCARBONUSEPA 1311, USEPA 8015BSORPTION CAPACITYUSEPA 9095, ASTM F726-81 (9.1.2), CAN/CGSB-183.2-94PROOF OF ABSORPTION ASTM F716-82 (11.2)PRESSURE RELEASE TESTUSEPA 9096AHUMAN TOXICITYEPS 1/RM/10VAPOUR REDUCTIONTVOC by GC/MSFLAMMABILITY USEPA 1030PATHOGENIC BACTERIAAS1766PESTICIDE RESIDUESUSEPA 8270CPARTICLE SIZE ISO 13320-1:1999PERMISSIBLE EXPOSURE LIMITNOHSC, ACGIH, or NIOSHNUTRIENT CONTENT APHA 4500LaboratoriesAll products have been thoroughly tested and certified by recognised testing authorities in Australia and overseas.The following Australian and overseas laboratories have been used:Australia■ Amdel Laboratories, Link Business Park, Unit 7B, 277 Lane Cove Road, North Ryde NSW 2113■ Australian Government Analytical Laboratories, 1 Suakin St., Pymble, NSW 2073■Ecowise Environmental Ltd. Scientific (Div. of ACTEW), 16 Lithgow St., Fyshwick, ACT■ Leeder Consulting (Chartered Chemists), 192 Station Street, Fairfield, Vic 3078■ Australian Laboratory Services P/L, Sydney 02 9841 9500■ Microns to Measure, 42 Ramsden Street, Clifton Hill, Vic 3068■ AMS Laboratories P/L, 118 Hattersley Street, Rockdale, NSW 2216■ MGT Environmental Consulting P/L, 3 Kingston Close, Oakleigh, Vic 3166■ Dairy Farmers Research & Development, 433 Victoria St., Wetherill Park, NSW 2164■ Insulation Assessment Laboratory, 14 Nelson St., Chatswood, NSW 2067■ Sportsturf Consultants (Aust.) P/L, 41 Westerfield Drive, North Clayton, Vic 3168International■■■■■■■Environment Canada (Emergencies Eng. Div.), 3439 River Road, Ottawa, Ontario, Canada K1A 0H3EFEH & Associates, 10919 Sagewind Drive, Houston, Texas 77089 USAEMSL Analytical Inc., 3 Cooper Street, Westmont, New Jersey 08108 USAEVS Environmental Consultants, 195 Pemberton Ave., North Vancouver, BC, Canada V7P 2R4Environment Testing & Engineering, PO Box 715, Northport, AL 35476 USACustom Biologicals Inc., Suite 208 - 902 Clint Moore Rd., Boca Raton, FL 33437 USAAEA Technology (Biotechnology Services), 353 Harwell, Didcot, Oxfordshire, OX11 ORA, UKPO Box 1154 Moss Vale, NSW Australia 2577T 61 2 4869 3261 F 61 2 4869 3264 info@enretech.com.au www.enretech.com.au

DescriptionEnretech Cellusorb is a 100% cellulose oil and fuel absorbent for use on water. It is completelybiodegradable and is produced from recycled waste cellulose materials. Cellusorb is highly oleophilicand will readily attach itself to all forms of hydrocarbons. It will absorb up to 18 times its own weightin oil based products - even when wet!ApplicationCellusorb has been designed to be used on small-scale spills on harbours, docks, wharves, marinas,re-fuelling depots, beaches, bird sanctuaries, reefs or mangrove areas - wherever an oil spill couldoccur. Cellusorb may be used on its own (loose) or in the form of socks, booms, bilge “rats” or pillows.Cellusorb can be spread over a spill surface and unlike most absorbents, will absorb trace oils andeliminate sheen. Cellusorb is particularly well suited as a filtration medium for removing hydrocarbonsfrom storm water collection systems, sump pits and interceptor systems.Features and Benefits■■■■Rapid absorption on water - Cellusorb’s rapid wicking action makes the product ideally suited for usein sensitive eco-systems. It is environmentally inert posing no dangers to flora, fauna or aquatic life.Floats indefinitely. The high buoyancy facilitates containment and retrieval. Safe, lightweightand easy to use.Super absorbant - only small amounts of Cellusorb are required. Very cost effective.Produced from recycled cellulose materials. 100% biodegradable. Safe, non-abrasive and easy to use.Product Code: ENR025SIZE: 10kg balePALLET QUANTITY: 16/palletCellusorb is also the sorbent usedto fill our containment socks, booms,mini-booms, bilge rats and pillows.Refer to the specific information sheetson those products for more details.Basic Instructions for UseEnsure sufficient amounts of the product be applied to the water’s surface to completely cover theoil spill. The spill will be quickly wicked up off the water and the spent Cellusorb can be retrieved byskimming or the use of nets. In most States, Cellusorb that has been used to absorb C 10 -C 36petroleum hydrocarbons, can be disposed to solid waste landfill. However, always consult your localwaste authority to ensure the proper disposal of used Cellusorb materials.STEP 1STEP 2STEP 3Broadcast enough Cellusorb to cover all of the oil on the water’s surface.Allow a few minutes for all of the oil to be drawn in and absorbed by the Cellusorb fibres.Collect used Cellusorb with rake or net, leaving an oilfree surface.Note: Loose particulate absorbents, like Cellusorb, are cost effective due to their very high surface area and significant absorbent capacity.However, if the spill area is large, or if the conditions are windy, loose particulate sorbents are difficult to apply. In these situations, the mostcost-effective product to use is the Enretech Absorbent Cotton Pad (Oil Only).PO Box 1154 Moss Vale, NSW Australia 2577T 61 2 4869 3261 F 61 2 4869 3264 info@enretech.com.au www.enretech.com.au

Booms, Socks and PillowsDescriptionEnretech absorbent booms, socks, and pillows are the most absorbent products available on themarket today. Most other products of this type are made of synthetic materials such as polypropylene –products that use energy and natural resources during manufacturing and are not considered‘ecofriendly’. Enretech booms, socks, and pillows contain Cellusorb as the absorbent medium -an organic sorbent manufactured from treated, recycled cellulose materials. Absorbent containmentsocks and pillows are available in both an “oil only” form as well as in a “universal” form (can absorb bothwater-based and oil-based liquids). Obviously, absorbent flotation booms are only available as “oil only”.ApplicationEnretech booms, socks, and pillows have a broad range of applications:■■■■Process industries use socks and pillows around leaking equipment to contain a wide range ofspilled liquids.Industries use booms and socks in collection ponds, dams and other wastewatermanagement systems.Spill response teams use “oil only” booms and socks to contain spills on roadways or waterways.Marinas use Booms and Bilge Rats to control oily pollution from bilges.Features and Benefits■■■■■■■■■Contains Cellusorb as main absorbent. Highly effective.Rapid oil absorption on water or land.Each 1.2m sock absorbs 16L of oil, a 2.4m sock absorbs 34L of oil and the 3.0m sock can absorbup to 42L of oil.Pillows each absorb up to 7.2L of oil, Mini-Booms up to 9.3L of oil and the 3.0m FloatingAbsorbent Booms up to 65L of oil.Manufactured in Australia from recycled cellulose materials.Lightweight and easy to use and dispose. Requires no special training.Biodegradable, Incinerable.Non-toxic, non-abrasive, non-carcinogenicBooms and Mini-Booms have reinforced outer jacket for long term use in water.Basic Instructions for Use (Socks and Pillows)STEP 1 Place socks around spill to prevent further spreadSTEP 2 Overlap socks by 5cm to eliminate gaps. For uneven surfaces, step on sock to ensure seal.STEP 3 Use pillows to absorb collected liquid or to plug drains.Product Codes:ENR040, ENR041, ENR043Containment Socks1.2m x 100mm (2 Pack)2.4m x 100mm (5 Pack)3.0m x 100mm (5 Pack)Product Code: ENR035Absorbent PillowsSIZE: 35cm 2PACKAGE: Pack of 5PALLET QUANTITY: 48 packsProduct Code: ENR032Reinforced BoomSIZE: 3.0m x 150mmPACKAGE: Carton of 3PALLET QUANTITY: 8 cartonsProduct Code: ENR031Mini BoomSIZE: 600mm x 150mmPACKAGE: Pack of 5PALLET QUANTITY: 24 cartonsPO Box 1154 Moss Vale, NSW Australia 2577T 61 2 4869 3261 F 61 2 4869 3264 info@enretech.com.au www.enretech.com.auProduct Code: ENR030Bilge RatSIZE: 300mm x 100mmPACKAGE: 10/pk, 6pks/ctnPALLET QUANTITY: 8 cartons

Absorbent Natural Fibre Pads, Rolls & WipesDescriptionEnretech Absorbent (Oil Only) Cotton Pads and Rolls, offer the superior absorbency of natural,biodegradable cotton in easy to use sizes. They are cost effective as they can absorb up to 70% moreoil per pad than equivalent weight polypropylene pads, yet are competitively priced.These products are most effective when used in conjunction with Enretech KleenSweep and form anintegral part of any spill response system. Most other absorbent pads on the market today are madeof synthetic materials such as polypropylene – products that are derived from oil, use large amountsof water and energy during their manufacture, are not biodegradable, and are not ‘eco-friendly’.Enretech Absorbent Cotton Pads and Rolls are made using mostly cotton fibres – a natural, sustainableand biodegradable organic fibre. Pads come in standard densities (200gsm and 400 gsm) and in a350 gsm pad with a rayon jacket for maximum strength, called ‘TUFF Sucker’).Absorbent Wipes are made from reinforced wood fibre rayon and thus are strong, lint-free, and can bere-used many times to clean up almost any kind of spilled liquid.Product Code: ENR047Cotton PadsSIZE: 45cm x 45cm x 200gsmPACK: 200 per cartonPALLET QUANTITY: 12 cartons per palletProduct Code: ENR048Cotton PadsSIZE: 45cm x 45cm x 400gsmPACK: 100 per cartonPALLET QUANTITY: 12 cartons per palletApplicationAbsorbent (Oil Only) Cotton Pads and Rolls are designed for use on all hard surfaces and on water toabsorb oil and fuel spills. They can also be used for cleaning up spills of animal, vegetable, mineral andsynthetic oils, and oil-based paints. These pads and rolls have been designed for, and are commonlyused in the industrial, commercial, automotive markets, and marine and manufacturing industries.Absorbent Wipes can be used to clean up almost any kind of liquid - both oils and water-based fluids,including most commercial acid and alkali solutions.Features and Benefits■■■■■■■Clean-up oils, fuels, and other oil-based liquids on land or waterSuperior performance and lower cost of natural cotton fibres.Pads absorb up to 70% more than equivalent poly pads (single use).Absorbent Wipes leave a clean, lint-free surface behind.Biodegradable in landfill or biofarm.Most effective when used in conjunction with KleenSweep. An integral part of any spillresponse system.200gsm pad absorbs 750mL oil per pad, 400gsm pad absorbs 1.5L oil per pad.Roll (1m x 50m x 200gsm) absorbs 185L oil per roll.Basic Instructions for UseSTEP 1 Place suitable number of pads on spill for immediate absorption.STEP 2 Remove pads carefully, as all pads tend to over-saturate and will drip liquid.STEP 3 Place a layer of Kleen Sweep, or an extra pad, in the bottom of the waste bag, to absorbany free liquid.Product Code: ENR049TUFF Suckers Cotton PadsSIZE: 45cm x 45cm x 350gsmPACK: 200 per cartonPALLET QUANTITY: 12 cartons per palletProduct Code: ENR046Cotton RollsSIZE: 1m wide x 50m long x 350gsm,not perforatedPALLET QUANTITY: 9 rolls per palletPO Box 1154 Moss Vale, NSW Australia 2577T 61 2 4869 3261 F 61 2 4869 3264 info@enretech.com.au www.enretech.com.auProduct Code: ENR045Absorbent WipesSIZE: 33cm x 59cmPACK: 50 wipes per packPALLET QUANTITY: 144 packs per pallet

Absorbent Cotton Pads and Rolls (Oil Only)Comparison between Cotton Padsand Melt-Blown Polypropylene Pads (Single Use)BULK DENSITYPAD SIZE PAD WEIGHT (g) MEASURED DENSITY (gsm) MEASURED THICKNESS MAXIMUM OIL ABSORBED PER PAD (L)Poly Pads 200 gsm 40cm x 51cm 38.7 190 2mm 0.50Cotton Pads 200 gsm 45cm x 45cm 43.4 214 4mm 0.76Poly Pads 360 gsm 50cm x 40cm 91.6 458 4mm 0.86Cotton Pads 400 gsm 45cm x 45cm 87.1 430 8mm 1.46May 2007. Conducted in-house by Enretech Australasia P/L based on ASTM 726-99 Test Method for Type I sorbents. Test Liquid: Used Sump Oil (approximately 25 C))Comparison of FeaturesPOLYPROPYLENE PADSCOTTON PADSDisposal to Landfill Poly pads are plastic and thus are not biodegradable. Cotton pads are made from 100% organic cellulose and completelyThe half-life of a poly pad in a landfill is around 300 years. biodegrade in landfill over time. Their half life is around 60 days.They thus take up ever increasing landfill space.Disposal via Incineration Poly pads often contain stabilisers and thus can only be Cotton pads are readily incinerated at lower temperatures.incinerated by high temperature, otherwise they mayOrganic cellulose combusts to carbon (soot), carbon dioxide and waterrelease toxic emissions.UV Degradation Even with added stabilisers, many poly pads can Cotton pads have a high tolerance to sunlight anddisintegrate quickly when exposed to UV in sunlight.are not nearly as susceptible to UV degradation.Pads turn to powder and become ineffective.Manufacture Poly pads are made from non-renewable petroleum. Our cotton pads are made with off-spec cotton fibres, left overThey require lots of energy in their multiple stages ofafter ginning. They are made from a natural, renewable resource,manufacture and thus have a very large greenhouseinvolve only minor inputs and have a very low GHG footprint.gas expenditure.Performance Poly pads absorb quickly but tend to be thinner and have Cotton pads absorb oil slightly more slowly than poly but absorb morelower oil holding capacity than cotton pads.total oil and do not release as much oil when picked up.Poly pads also tend to more easily release oil under pressure(as they are designed to do).Environmental Toxicity If accidentally released in the environment, poly pads will If accidentally released in the environment, cotton pads biodegradenot biodegrade and will eventually re-release the oil they much more readily, and are thus not a long-term environmental risk.have absorbed. Poly pads may break down to plasticPads biodegrade only after their absorbed oil has biodegraded.powder under strong sunlight (UV).PO Box 1154 Moss Vale, NSW Australia 2577T 61 2 4869 3261 F 61 2 4869 3264 info@enretech.com.au www.enretech.com.au

BIOHAZARD - INFECTIOUS WASTE ABSORBENTINFECTIOUS WASTE • BLOOD • VOMIT • URINE • FAECESContentsBettaClean SuperAbsorbent 1000mLProtective Nitrile Gloves(no Latex) x 2 Pair Antiseptic Towelettes x 2Absorbent Low-lint WipeDisposable ApronLarge Disposable Scoopand ScraperFace Mask - with VisorClinical Waste Disposal BagInstruction Card5reasonsWHY BettaClean is aBETTER Option for your customers:1 BETTACLEAN is the only spill kit currently available that will absorbthe average liquid stomach volume, without having to use additionalabsorbent sachets!2 It absorbs almost twice the volume of other readily available kits.3 Disposable clean up tools provided are a large “responsible” size –it is easier for staff to avoid contact with hazardous waste.4 It is up to 30% cheaper than alternatives AND it dries the floor properly!!5 Unique Fibre-Lock Technology locks wetness and odour into hollow fibres.Contact Enretech for further information on 61 2 4869 3261

Q Does mopping up spills create another problem?A Yes, it introduces water to the surface, and until the surface is completelydry, there is always potential for slip injuries. Water can also spread anybiological contamination onto more surfacesQ Is there a way to dry clean the surface?A Yes, Use BettaClean. It’s 21st Century technology that dry cleans the surface(No water necessary). You will be amazed by BettaClean’s performance andits ability to clean up a messy situation. It is now available in a large 20L pailand is ideal for areas where spills occur regularly.BettaClean 20L Pailabsorbs and removesall body fluidseffective on all liquidseliminates odoursdoesn’t releaseabsorbed fluids – unlikeother absorbentsIdeal for...Schools– canteens– class rooms and corridors– gymnasiumAged and day care centresHospitalsKitchensPrisonsUniversities/TAFEsWhere can I getBettaClean 20L pail from?

OILS AND FUELS SPILL KITSSpill kits designed to contain and clean up spilled liquids in workshops, warehouses, petrol stations, service vehicles, transporttrucks or anywhere that a spill may occur. Effective on fuels, oils, hydraulic fluids or any other oil-based liquid spill or leak thatoccurs in a controlled industrial, commercial, transport or marine environment.Workshop Spill KitsWorkshop Spill Kit - Small120L Wheelie Bin Absorbs 100L (Oil)■ Mobile kit for fast spill response■ Highly visible and easy to use■ Combines both pads and particulate for quickand complete clean-up. No residues remain■ Effective on a wide range of oil-based liquids■ A “must-have” for small to medium workshopsWorkshop Spill Kit - Large240L Wheelie Bin Absorbs 250L (Oil)■ Larger mobile kit with suitable capacityto handle a 200L drum spill■ Highly visible and easy to use■ Combines both pads and particulate for quick andcomplete clean-up. No residues remain■ Effective on a wide range of oil-based liquids■ Ideal for large workshopsPart No.: ENR090 Contents■ 3 x KleenSweep 5 kg Bag ■ 2 x Absorbent Containment Socks (Oil Only)1.2m x 10 cm dia. ■ 20 x Absorbent Cotton Pads (Oil Only) 45cm sq x 200gsm■ 50 x Low Lint Absorbent Wipes 33cm x 59cm ■ 1 x Instruction Card and SelectionChart A4 ■ 1 x Scoop (yellow) 500g ■ 2 x LDPE Disposal Bags + ties 450 x 710mm■ 2 x Security Seal ■ 1 x Workshop Kit Label Set (Black)■ 1 x Wheelie Bin (yellow) 120L ■ 1 x PVC Gloves wrist GP27 (pair)Part No.: ENR101 Contents■ 3 x KleenSweep 10 kg Bag ■ 3 x Absorbent Containment Socks (Oil Only)3.0m x 10 cm dia. ■ 25 x Absorbent Cotton Pads (Oil Only) 45cm sq x 200gsm■ 50 x Low Lint Absorbent Wipes 33cm x 59cm ■ 1 x Instruction Card and SelectionChart A4 ■ 1 x scoop (yellow) 500g ■ 2 x LDPE Disposal Bags + ties 450 x 710mm■ 2 x Security Seal ■ 1 x Workshop Kit Label Set (Black)■ 1 x Wheelie Bin (yellow) 240L ■ 1 x PVC Gloves wrist GP27 (pair)Transport Spill KitsTransport Spill Kit - SmallAbsorbs 45L (Oil)■ Compact nylon carry bag - will fit behindseat in most trucks■ Combines both pads and particulate forquick and complete clean-up■ Contains everything needed to clean up aspill on the road, in wet or dry conditions.■ Ideal for small trucks, vans, forklifts, etc.Transport Spill Kit - LargeAbsorbs 126L (Oil)■ Larger compact nylon carry bag - will fitbehind seat in larger trucks and vans.■ Combines both pads and particulate forquick and complete clean-up■ Contains everything needed to clean up aspill on the road, in wet or dry conditions.■ This is one for the big trucks!Part No.: ENR091 Contents■ 1 x KleenSweep 5 kg Bag ■ 1 x Absorbent Containment Socks (Oil Only)1.2m x 10 cm dia. ■ 1 x Absorbent Pillow (Oil Only) 35cm sq ■ 5 x Absorbent CottonPads (Oil Only) 45cm sq x 200gsm ■ 10 x Low Lint Absorbent Wipes 33cm x 59cm■ 1 x Instruction Card and Selection Chart A4 ■ 1 x LDPE Disposal Bags + ties450 x 710mm ■ 1 x Nylon Bag (Duffle)Service Station Spill KitService Station Spill Kit120L Wheelie Bin Absorbs 118L (Oil)■ Mobile - for fast response at service stations■ Combines both pads and particulate for quick andcomplete clean-up. No residues remain■ Contains extra PPE and clean-up accessories■ Effective on a wide range of oil-based liquids■ Easy to use - no special training requiredPart No.: ENR092 Contents■ 2 x KleenSweep 5 kg Bag ■ 2 x Absorbent Containment Socks (Oil Only)2.4m x 10 cm dia. ■ 2 x Absorbent Pillow (Oil Only) 35cm sq ■ 10 x Absorbent CottonPads (Oil Only) 45cm sq x 200gsm ■ 25 x Low Lint Absorbent Wipes 33cm x 59cm■ 1 x Instruction Card and Selection Chart A4 ■ 2 x LDPE Disposal Bags + ties450 x 710mm ■ 1 x Nylon Bag (Hanging)Marine Spill KitMarine Spill Kit120L Wheelie Bin Absorbs 140L (Oil)■ Mobile kits for fast spill response at Marinasand other maritime locations■ Highly visible and easy to use■ Contains sorbents for use on both workshopfloors and decks, and on water■ Best Value for money■ A “must-have” for all marinasPart No.: ENR100 Contents■ 3 x KleenSweep 5 kg Bag ■ 2 x Absorbent Containment Socks (Oil Only)1.2m x 10 cm dia. ■ 2 x Absorbent Pillow (Oil Only) 35 cm sq ■ 20 x Absorbent CottonPads (Oil Only) 45cm sq x 200gsm ■ 50 x Low Lint Absorbent Wipes33cm x 59cm ■ 1 x Instruction Card and Selection Chart A4■ 1 x Dustpan and Brush Set ■ 2 x LDPE Disposal Bags + ties 450 x 710mm■ 2 x Security Seal ■ 1 x Workshop Kit Label Set (Black) ■ 1 x Wheelie Bin (yellow) 120L■ 2 x PVC Gloves (wrist) medium (pair) ■ 1 x Dust GogglesPart No.: ENR094 Contents■ 1 x KleenSweep 5 kg Bag ■ 40 x Absorbent Cotton Pads (Oil Only)45cm sq x 200gsm ■ 2 x Absorbent Containment Socks (Oil Only) 3.0m x 10 cm dia.■ 50 x Low Lint Absorbent GP Wipes 33cm x 59cm ■ 1 x Instruction Card and SelectionChart A4 ■ 2 x Security Seal - Wheelie Bin Only ■ 2 x LDPE Disposal Bags + ties450 x 710mm ■ 1 x Kit Label Set (Black) - Wheelie Bin Only Set of 4■ 1 x Wheelie Bin (yellow) 120L (outdoor)■ Also available in Hanging Nylon Bag (indoor) Part No.: ENR093Sorbents tested to 12 standards, including absorption capacity and leachate. Individual refill items available. All Enretech kits comply with thelatest Australian Standards and Federal NOHSC (ASCC) Codes or Practice that pertain to the handling, storage, clean-up and disposal of DangerousGoods and Hazardous Substances: NOHSC: 2007(1994), 1005(1994), and 1015(2001) and AS/NZS 3816:1998, AS1940-2004, AS3780-1994, andAS2507-1998. Wherever possible, Enretech sorbents within these spill kits are made from renewable, recycled and treated cellulose materials,and are 100% biodegradable. However, as they are organic, these materials are not suitable for use on strong oxidisers.

UNIVERSAL AND SPECIALTY SPILL KITSSpill kits designed to contain and clean up spilled liquids in workshops, warehouses, grounds/building maintenance operations,manufacturing facilities, or anywhere that a liquid spill may occur. Effective both on oil-based liquids as well as on water-basedfluids. Suitable for cleaning up corrosive and toxic chemical spills.Universal Spill KitUniversal Spill Kit120L Wheelie BinAbsorbs 80/100L (Water/Oil)■ Combines both pads and particulate for quickand complete clean-up. No residues remain■ Effective on both water-based andoil-based liquids■ For use on liquids such as paints, pesticides,herbicides, and foods. A versatile and costeffectivespill kit for almost any spill eventPart No.: ENR089 Contents■ 3 x KleenSweep 5 kg Bag ■ 2 x Absorbent Containment Socks (Universal)1.2m x 10 cm dia. ■ 20 x Absorbent Pads (Universal) 430 x 480mm■ 50 x Low Lint Absorbent Wipes 33cm x 59cm ■ 1 x Instruction Card and SelectionChart A4 ■ 1 x Scoop (yellow) 500g ■ 2 x LDPE Disposal Bags + ties 450 x 710mm■ 2 x Security Seal ■ 1 x GP Kit Label Set (Green) ■ 1 x Wheelie Bin (yellow) 120L■ 2 x Disposable Nitrile Gloves large (pair)Photo Chemical Spill KitPhoto Chemical Spill KitAbsorbs 20L (Water)■ Compact, light-weight and easy to use■ Designed for the quick and completeclean-up of photographic process solutions.■ Contains everything needed to clean up aphoto chemical spill on a tiled floor■ Refill Pack available (Part No.: ENR118)Part No.: ENR117 Contents■ 10 x Absorbent Pads (Universal) 430 x 480mm ■ 1 x Absorbent Containment Sock(Universal) 1.2m x 10cm dia. ■ 1 x Safety Glasses (with side shields) ■ 1 x DisposableApron 80 x 125cm ■ 2 x pair of Nitrile Gloves (disposable) ■ 1 x LDPE Disposal Bag + tie450 x 710mm ■ 1 x Instruction Card and SOP A4 - Storage Box + LidHazchem Spill KitNEWAcid/Alkali Kit120L Wheelie BinAbsorbs 75L (Acid/Alkali)■ Effective on a wide range of acidsand alkalis (caustics)■ Now suitable for strong oxidisers suchas Nitric Acid and Hydrogen Peroxide■ Ideal for where wet cell batteries are rechargedor where caustic cleaning solutions are usedCaution: acidic wastes must always be segregatedfrom alkaline wastesCompact Spill KitNEWCompact Spill Kit20L Pail Absorbs 24L (Oil)■ Contains 7kg of KleenSweep in 20L pailwith re-sealable lid■ Effective on both water-based andoil-based liquids■ Particulate sorbent ensures quick andcomplete clean-up. No residues remain■ Quick, safe and easy to use. Suitable foroutdoor storage.■ Made from 97% recycled, organic fibres.100% biodegradable. Suitable for BiofarmsPart No.: ENR106 Contents■ 1 x KleenSweep 20L pail ■ 1 x Scoop (yellow) 500g ■ 1 x Kit Label Procedure■ Refill with 1 x Kleen Sweep 5kg bag (ENR022)BettaClean Biohazard Spill KitBettaClean Bio-HazardInfectious Waste Spill Kit■ Disposable spill kit designed for blood,urine, vomit, faeces or any other liquid spillwhich poses an infectious health risk■ Contains high capacity sorbent, PPE andclean-up accessories■ Kit contains dust-free, disposableNitrile gloves. No latex■ Superior performance and lower cost ofuse. Absorbs twice the volume of other kits■ Sorbent is made from organic fibres and is100% incinerable.■ Unique Fibre Lock Technology locks inwetness and odours.■ Quick, safe and easy to use.■ Does not contain disinfecting solution,so kit has almost indefinite shelf life.■ Ideal for hospitals, buses, trains, taxis,prisons, aged/day care centres.Part No.: ENR120 Contents■ 1 x Bag BettaClean Spill Kit (with instructions) ■ 1 x BettaClean Absorbent Sachet(1000mL) ■ 1 x Nitrile Gloves (disposable) ■ 1 x Antiseptic Towelettes■ 1 x Low Lint Absorbent Wipe 33cm x 59cm ■ 1 x LDPE Disposable Apron■ 1 x Disposable Scoop (large) ■ 1 x Surgical Face Mask (with visor)■ 1 x LDPE Clinical Waste Bag ■ 1 x Instruction CardPart No.: ENR095 Contents■ 50 x Absorbent Pads (Universal) 43cm x 48cm■ 3 x Hazchem Absorbent Containment Socks 1.22m x 7.6cm dia.■ 3 x Hazchem Absorbent Pillows 235mm x 235mm ■ 1 x Instruction Card & WasteSegregation Chart A4 ■ 2 x LDPE Disposal Bags + ties 450 x 710mm■ 2 x Security Seal ■ Hazchem Kit Label Set ■ 1 x Wheelie Bin (yellow) 120L■ 1 x PVC Gloves (gauntlet) medium (pair) ■ 1 x Goggles■ 1 x Disposable Overalls (large) C-D1Ask your Enretechdistributor for pricing on ourrange of Spill Kits.You’ll be pleasantly surprised.Sorbents tested to 12 standards, including absorption capacity and leachate. Individual refill items available. All Enretech kits comply with thelatest Australian Standards and Federal NOHSC (ASCC) Codes or Practice that pertain to the handling, storage, clean-up and disposal of DangerousGoods and Hazardous Substances: NOHSC: 2007(1994), 1005(1994), and 1015(2001) and AS/NZS 3816:1998, AS1940-2004, AS3780-1994, andAS2507-1998. Wherever possible, Enretech sorbents within these spill kits are made from renewable, recycled and treated cellulose materials,and are 100% biodegradable. However, as they are organic, these materials are not suitable for use on strong oxidisers.

Know Your Risks and How to Deal with a Spill SafelyYou must conduct a risk assessment of your operations to determine the types and volumes of liquids you will most likely spill, and what type ofsorbents you’ll need to clean them up. Use the following chart to determine the best Enretech sorbent for your particular workplace.Spills on Hard Surfaces (sealed or unsealed)HAZARDOUS AND KleenSweep BettaClean Oil-Only Pads Universal PadsNON-HAZARDOUS LIQUIDSSocks & Pillows Socks & PillowsFuels and LubesHydraulic FluidsCoolantsCommon Acids & Alkalis (photo & pool chemicals, etc.)Concentrated Acids & Alkalis (lab strength chemicals, etc.)Solvents (ketones, halocarbons, alcohols, etc.)Paints (oil based)Paints (water based)Drying Oils (linseed, pine oil, cod liver oil, etc.) (1)Pesticides (solvent based)Pesticides (water based)Vegetable Oils or Animal Fats (liquid)Water-based compounds (ie: detergents, food, etc.)Pharmaceuticals/DrugsBody Fluids (blood, urine, vomit, etc.) (2)DANGEROUS GOODS LIQUIDSClass 3 - Flammable LiquidsClass 5 - Oxidising Substances (3)Class 6 - Toxic and Infectious SubstancesClass 8 - Corrosive Substances (acid or alkali)Class 9 - Miscellaneous Dangerous GoodsOIL SPILLS ON LAND, OR SHORELINES✓✓✓✓✓✓✓✓ ✓ ✓✓✓✓✓✓✓✓✓ ✓✓✓✓ ✓✓ ✓✓ ✓Use Enretech-1 to bioremediate the contamination in-situ, or excavate the contaminated soil and treat via ex-situ biofarm.Refer to the Enretech-1 bioremediation section of this webpage for more information.OIL SPILLS ON WATER✓ ✓ ✓Absorb floating oil using Cellusorb as a loose particulate, or in the form of “Oil Only” absorbent socks, pillows or booms.For larger spill areas, use “Oil Only” cotton pads instead of loose particulate Cellusorb.✓✓✓Use Enretech Hazchem spill kit ONLYUse Enretech Hazchem spill kit ONLY✓✓✓Sorbent Safety Guide✓✓✓✓✓✓✓✓✓✓✓✓✓✓✓✓✓✓Health, safety & environmental risks from Dangerous Goods Liquids can vary considerably. In general, Enretech sorbents can be used for manyDG Liquids, however seek help for all spills involving Packing Group I DG Liquids. Contact Enretech Australasia (0425 232 741) for furthertechnical assistance, as required.Notes: (1) Drying oils can have high risk of spontaneous combustion. Take appropriate precautions. (2) Body fluid spills have potential health risks associated with them. Take appropriate precautions.(3) Compounds classed as Oxidisers by ADG and GHS systems should not come into contact with organic materials of any kind.When used for liquid spill clean-up, sorbents tend to take on the characteristics of the liquid they have absorbed. Thus, always consult the MSDS of the spilled liquid prior to absorption withEnretech sorbents.

HAZARDOUS AND Oils & Fuels Universal/Compact HazChem BettaCleanNON-HAZARDOUS LIQUIDS Spill Kits Spill Kits Spill Kit Spill KitFuels and Lubes✓ ✓Hydraulic Fluids✓ ✓Coolants✓ ✓ ✓ ✓Common Acids & Alkalis (photo & pool chemicals, etc.)✓ ✓Concentrated Acids & Alkalis (lab strength chemicals, etc.)✓Solvents (ketones, halocarbons, alcohols, etc.)✓ ✓✓Paints (oil based)✓ ✓Paints (water based)✓ ✓ ✓Drying Oils (linseed, pine oil, cod liver oil, etc.) (1)✓ ✓Pesticides (solvent based)✓ ✓Pesticides (water based)✓ ✓ ✓Vegetable Oils or Animal Fats (liquid)✓ ✓Water-based compounds (ie: detergents, food, etc.)✓ ✓ ✓Pharmaceuticals/Drugs✓ ✓ ✓Body Fluids (blood, urine, vomit, etc.) (2)✓ ✓Spill Safety GuideSafety and Environmental Compliance...Today, spill response, and the resultant waste to be disposed of, are governed by regulations to protect both people and the environment.Compliance with these regulations is generally met through the use of commercial spill kits containing high performance absorbents,personal protective equipment, written response procedures/guidelines and accessories to ensure proper storage and disposal of spill wastes.Enretech offer a range of spill response products that comply with current legislation and Australian Standards, helping you:■ Meet your legal requirements: ensure your Environmental “due diligence”, as well as your OH&S “duty of care”■ Reduce your spill clean-up costs■ Meet your Environment Management Plan for waste reduction, increased use of recycled materials and use of productswith a low carbon footprint.Know Your Risks and How to Deal with a Spill SafelyYou must conduct a risk assessment of your operations to determine the types and volumes of liquids you will most likely spill, and what type ofsorbents and kits you’ll need to clean them up. Use the following chart to determine the best Enretech spill kit for your particular workplace.✓✓✓✓✓✓DANGEROUS GOODS LIQUIDSClass 3 - Flammable Liquids✓ ✓Class 5 - Oxidising Substances (3)✓Class 6 - Toxic and Infectious Substances✓ ✓Class 8 - Corrosive Substances (acid or alkali)✓ ✓Class 9 - Miscellaneous Dangerous Goods✓ ✓ ✓✓✓Health, safety & environmental risks from Dangerous Goods Liquids can vary considerably. In general, Enretech spill kits can be used for manyDG Liquids, however seek help for all spills involving Packing Group I DG Liquids. Contact Enretech Australasia (0425 232 741) for further technicalassistance, as required.Notes: (1) Drying oils can have high risk of spontaneous combustion. Take appropriate precautions. (2) Body fluid spills have potential health risks associated with them. Take appropriate precautions.(3) Compounds classed as Oxidisers by ADG and GHS systems should not come into contact with organic materials of any kind.When used for liquid spill clean-up, sorbents tend to take on the characteristics of the liquid they have absorbed. Thus, always consult the MSDS of the spilled liquid prior to absorption withEnretech sorbents.

Generic Spill Response ProcedureThe following is a generic procedure which can be applied to essentially any type of liquid spill clean-up in the workplace. As with all spills, knowwhat you are dealing with, and only respond if you have been suitably trained, have the required materials on hand, and are wearing appropriateprotective equipment.■ ASSESS THE SITUATION1 Get AwayThe first person to notice the spill or leak, should get away from the immediate area in order to evaluate the situation without exposing themselvesto any danger. Obviously, this might not be needed if the nature of the spill is known and is minor.2 Identify the Spill to the Greatest Extent PossibleDo so without being at risk. This includes identifying: a) the type of material spilled; b) the size of the spill and whether the leak has stopped;c) whether two potentially incompatible chemicals; and d) any unusual features such as foaming, odour, fire, etc.3 Is This an Emergency?Leaks that can be cleaned up by personnel on the spot or by maintenance personnel are not usually emergencies. Often what determines anemergency has been defined in the Emergency Response Plan and incorporated into spill response training. If this is not clear, or someone has beenseriously injured, consider it an emergency.4 Get Help for All but Very Minor SpillsWhen reporting a spill, do not leave the spill unattended. Establish a hazard zone that will keep non-emergency response personnel well out ofdanger. In emergency situations, the amount of training determines the degree of participation in the cleanup.5 Identify the Spilled MaterialIs it flammable, combustible, toxic and volatile, toxic or corrosive and non-volatile, or an oxidizing agent? The label and Material Safety Data Sheet forthe product should give information on safe cleanup.6 Plan How to Clean Up the SpillProcedures for common types of spills and leaks should be part of the Emergency Response Plan and training. Consider variables such as rain and wind.7 Obtain Proper Spill Control MaterialsThis would include spill control materials such as sorbents, containment socks, spark proof tools (for flammable liquids), booms, neutralising fluids, etc.8 Put on Appropriate PPEPersonal Protective Equipment (PPE) can include respirators, gloves, goggles, etc., as needed.■ CLEAN UP THE SPILL9 Stop the Source of the Spill or LeakThis can include turning off the valve, patching a leaky hose, draining a tank, or up righting a knocked over container of liquid.10 Stop the Spill from SpreadingThis can include use of appropriate absorbent/containment materials such as socks (land) and booms (water), shutting down ventilation systems tokeep gases and vapours from spreading, and plugging drains to prevent contamination of the water supply.11 Use Appropriate Sorbents and EquipmentRemember, particulate sorbents are primarily suited for cleaning up small spills and the residues left over after a large spill. Absorbent pads can beused to collect the bulk liquid first. Watch out for free liquid as pads will tend to over-saturate.12 Dispose of Contaminated Materials ProperlyContaminated spill control materials and disposable personal protective clothing may have to be disposed of as hazardous waste. Contaminatedtools and non-disposable PPE should be safely decontaminated and stored in clean plastic bags for future use.■ EVALUATE13 File an incident reportThe incident report should be filed with the person responsible for EHS in the organization, for every spill, including non-emergency (incidental)spills. Evaluate your plan to determine if changes are required. Replenish all supplies.Many of the basic steps involved in cleaning up emergency and non-emergency spills and leaks are similar. The primary difference is the type and degree of hazard, location of the spill, level of training,and types of personal protective equipment necessary to clean up the spill safely.Even non-emergency spills and leaks take knowledge and training to clean up safely. This can be done as part ofstandard program developed to ensure your company’s compliance with State WorkCover and State/Federal environmental protection obligations.PO Box 1154 Moss Vale, NSW Australia 2577T 61 2 4869 3261 F 61 2 4869 3264 info@enretech.com.au www.enretech.com.au

About UsIt is now commonly accepted by most businesses and organisations that Risk Management and Ecologically Sustainable Development are the keysto successful growth. To this end, these organisations are integrating sound environmental and OHS practices into their day-to-day work practices -not merely for regulatory compliance alone, but for the better bottom line as well. Some of the key areas where activities have significantenvironmental and OHS risks and must be controlled, include:■ Hazardous Materials Management ■ Site Maintenance■ Waste Minimisation and Management ■ Risk/Liability Management■ Soil and Water Pollution Prevention and Control ■ Emergency ResponseAt Enretech Australasia, we specialize in the manufacture of organic absorbents and soil treatment technologies for the clean-up of a wide varietyof liquid spills on land and water. Our absorbents are designed for industrial and commercial applications and also we concentrate in thedevelopment of specialty sorbents for nontraditional areas such as foods, health and education. Our soil treatment technology is a simple, yeteffective bioremediation technology commonly used for the in-situ treatment of oil and fuel spills on soil. As a result, we offer our customers acomplete package of risk management and pollution control materials and services.All Enretech sorbents and products have been extensively tested as per USEPA, USDA, ASTM, CGSB and ISO and meet or exceed Australian andinternational environmental and OHS standards and requirements. Our products thus are an important tool in assisting organisations to meet theirobligations under Environmental, OHS as well as ISO 9000 and 14000 requirements.Enretech Australasia is a wholly-owned Australian company whose focus over the past 10 years has been on the manufacture of clean-up andremediation products using only recovered or recycled cellulose by-products. Treated via a unique process, we have found that these products havesuperior absorption, cost-effectiveness, safety, ease of use and enviro-friendliness when compared to other absorbent or soil treatment products onthe market. These findings have been supported by Universities, Governments and Industry Groups. We challenge anyone to test and compare.A Bit of History■ Enretech Australasia began trading in Australia (Sydney) in 1996.■ Australian Distribution network, International Distributors in Asia and Africa established by 1998.■Enretech products manufactured in Australia starting 1999 for the Australian market.■ Commenced export of Enretech products from Australia to S.E. Asia and Africa in 2000.■ Commenced Supply/Co-Branding with Caltex (Aus.) and Chevron-Texaco (Africa) in 2001.■ National Supply/Co-Branding Agreement for Australia with Shell Oceania Division in 2002.■ Distribution Agreement for Japanese Market signed with Mitsubishi Corporation 2003.■Development and supply of specialty spill/risk management systems for a national grocery retailer in Australia, comprising over800 supermarkets and distribution centres and 400 petrol stations 2004-5.■ Moved into expanded, purpose built office and manufacturing facility 2009.■ Supply specialty spill/risk management systems for second national grocery retailer 2010.Our products are available throughout Australia via an extensive distribution network in each State and nationally through partnerships with majordistribution companies. Enretech products are also available in 14 countries throughout Asia, Africa and the Middle East.Refer to our website for more details (www.enretech.com.au).PO Box 1154 Moss Vale, NSW Australia 2577T 61 2 4869 3261 F 61 2 4869 3264 info@enretech.com.au www.enretech.com.au

Enretech Australasia Pty Ltd.PO Box 1154 Moss Vale, NSW Australia 2577T 61 2 4869 3261 F 61 2 4869 3264info@enretech.com.au www.enretech.com.au