2002 - cesnet

12.3.1 WP0 – Requirement AnalysisThe task of WP0 is to compile a general overview of the current status of relevanttools and platforms. On the basis of this list, existing and future requirementsfor individual SCAMPI project components were identified and analyzed.WP0 is internally structured to these tasks:• overview of tools, platforms, and technologies that are in some way relatedto SCAMPI• definition of requirements• unification of requirementsThe output of WP0 is represented by two documents:• D0.1 – Description and Analysis of the State-of-the-art• D0.2 – Measurement-based Application Requirements12.3.2 WP1 – Architecture DesignThe task of WP1 is to create a basic design of the monitoring adapter architecture,define an application level interface (Monitoring Application ProgrammingInterface – MAPI) and perform analysis of the operating system requirements.The following documents will represent the WP1 output:• D1.1 – High-level SCAMPI Architecture and Components• D1.2 – SCAMPI Architecture and Component Design• D1.3 – Detailed Architecture Design• D1.4 – Recommendations for Next-Generation Monitoring Systems12.3.3 WP2 – System ImplementationWP2 is the key part of the entire SCAMPI project. The main WP2 goal is to implementthe core of the designed architecture on the software and hardware leveland integrate all components. Another task is the development of applicationsusing the SCAMPI platform. The internal WP2 structure is as follows:• lower layer implementation• middleware implementation• system integration• application developmentDocuments:• D2.1 – Preliminary Implementation Report• D2.2 – SCAMPI Prototype Implementation• D2.3 – Enhanced SCAMPI Implementation and ApplicationsHigh-speed National Research Network and its New Applications 2002147