material safety data sheet - Henkel Content Management System

MATERIAL SAFETY DATA SHEETSECTION 13.DISPOSAL CONSIDERATIONSDisposal of this material should be undertaken by a registered chemical disposal company. Emptycontainers should be recycled or disposed of by a registered contractor.SECTION 14.TRANSPORT INFORMATIONUN Number: 3259Proper Shipping Name: AMINES, SOLID, CORROSIVE, N.O.S. (CONTAINSAMINOETHYLPIPERAZINE AND NONYLPHENOL)Class:8, CorrosivePacking Group: IIIHazchem code: 2XEmergency Information: Dangerous Goods - Initial Emergency Response Guide (SAA/SNZ HB 76)or EPG 8A1SECTION 15.REGULATORY INFORMATIONSUSDP POISON SCHEDULE: 5SECTION 16.OTHER INFORMATIONAbbreviations/acronyms:ASCC - Australian Safety and Compensation CouncilSUSDP - Standard for the Uniform Scheduling of Drugs and PoisonsDISCLAIMER:The percentage weight (% w/w) of ingredients is not to be taken as a specification guaranteed byHenkel Australia Pty. Limited, but only as an approximate guide to the content of hazardous ingredientsin the material. The information contained herein does not constitute a guarantee by Henkel AustraliaPty. Limited concerning the properties of the material.The information contained in this Material Safety Data Sheet is offered in good faith and has beendeveloped from what is believed to be accurate and reliable sources. The information is offered withoutwarranty, representation, inducement or licence and Henkel Australia Pty. Limited assumes no legalresponsibility for reliance upon same. Henkel Australia Pty. Limited disclaims any liability for loss, injuryor damage incurred in connection with the use of the material or its associated Material Safety DataSheet.This information is not to be construed as a representation that the material is suitable for any particularpurpose or use except those conditions and warranties implied by either Commonwealth or Statestatutes. Customers are encouraged to make their own enquiries as to the material's characteristicsand, where appropriate, to conduct their own tests in the specific context of the material's intended use.DATE OF ISSUE: 21.07.08 REVISION OF: 30.03.07 IDH NO: -Page 4 of 4PRODUCT NAME :NORDBAK HIGH IMPACT WEARING COMPOUND (HARDENER)