material safety data sheet - Henkel Content Management System

MATERIAL SAFETY DATA SHEETSECTION 1.Product Name:IDENTIFICATION OF THE MATERIAL AND SUPPLIERNORDBAK HIGH IMPACT WEARING COMPOUND(HARDENER)Proper Shipping Name: AMINES, SOLID, CORROSIVE, N.O.S. (CONTAINSAMINOETHYLPIPERAZINE AND NONYLPHENOL)Product Code(s): 1214823Part Number(s):1174109 (11.35kg)Use: Two-part high impact wearing compound is used to protect chutes, hoppers,elbows and other processing equipment that is exposed to both abrasionand impact. NORDBAK HIGH IMPACT WEARING COMPOUND(HARDENER) is used in conjunction with the epoxy resin.Supplier: HENKEL AUSTRALIA PTY. LIMITED ABN 82 001 302 996ADHESIVES TECHNOLOGIES135-141 Canterbury Road, Kilsyth, Victoria, 3137. Tel: (03) 9724 644424 HOUR EMERGENCY CONTACT NUMBER Tel: (03) 9724 6556SECTION 2.HAZARDS IDENTIFICATIONSTATEMENT OF HAZARDOUS NATURE:Hazardous according to the criteria of ASCC. This material has been classified as Corrosive (C) andIrritant (Xi).Risk phrase(s):R34 Causes burns.R37 Irritating to respiratory system.R41 Risk of serious damage to eyes.R43 May cause sensitisation by skin contact.Safety phrase(s):S26 In case of contact with eyes, rinse immediately with plenty of water and seek medical advice.S27 Take off immediately all contaminated clothing.S28 After contact with skin, wash immediately with plenty of soap suds.S36/37/39 Wear suitable protective clothing, gloves and eye/face protection.S45 In case of accident or if you feel unwell, seek medical advice immediately (show the labelwhenever possible).S61 Avoid release to the environment. Refer to special instructions / safety data sheets.DANGEROUS GOODS INFORMATION:Classified as Dangerous Goods according to the criteria of the Australian Code for the Transport ofDangerous Goods by Road and Rail (ADG Code).Class: 8 - Corrosive substanceSUSDP POISON SCHEDULE: 5SECTION 3.COMPOSITION/INFORMATION ON INGREDIENTSINGREDIENTS:CHEMICAL ENTITY CAS NO. PROPORTIONAluminium oxide [1344-28-1] 30-60% w/wDATE OF ISSUE: 21.07.08 REVISION OF: 30.03.07 IDH NO: -Page 1 of 4PRODUCT NAME :NORDBAK HIGH IMPACT WEARING COMPOUND (HARDENER)

MATERIAL SAFETY DATA SHEETSilicon carbide [409-21-2] 10-30% w/wN-(2-Aminoethyl) piperazine [140-31-8] 1-5% w/wAmine Adduct1-5% w/wSilica, amorphous, fumed [7631-86-9] 1-5% w/wMagnesium oxide [1309-48-4] 1-5% w/wButadiene – acrylonitrile copolymer [68683-29-4] 1-5% w/wNonylphenol [25154-52-3] 1-5% w/wPolyethylene [9002-88-4] 1-5% w/wTriethylenetetramine [112-24-3]

MATERIAL SAFETY DATA SHEETStorage: Store indoors in a cool, dry, well ventilated area away from heat, sparks and open flames.Keep containers sealed when not in use. Protect from physical damage and sunlight. Store according torelevant State Dangerous Goods Storage Requirements.SECTION 8.EXPOSURE CONTROLS / PERSONAL PROTECTIONNational exposure standards: None establishedEngineering controls:A local mechanical exhaust system is required where vapour is beinggenerated.Personal protective equipment: Avoid contact with skin and eyes. Wear suitable protective clothing,safety footwear, nitrile or Viton gloves and chemical splash goggles. Use in a well ventilated area. Ifinhalation risk exists, wear an organic vapour respirator complying with the requirements of AS 1715and AS 1716.SECTION 9.PHYSICAL AND CHEMICAL PROPERTIESPhysical data:Appearance:Dark grey pasteSpecific gravity: 1.71Solubility:Slightly soluble in water.Odour:Slight ammoniacalFlash point (PMCC): >93°CSECTION 10.STABILITY AND REACTIVITYChemical stability: Stable under normal conditions of temperature and pressure.Conditions to avoid: Avoid high temperatures, sparks and flames.Incompatible materials: Keep away from strong acids, strong bases and strong oxidising agents.Hazardous decomposition products: When heated to decomposition, it will emit oxides of carbon,oxides of nitrogen and smoke.Other reactions: Exothermic polymerisation will occur with epoxy resin.SECTION 11.TOXICOLOGICAL INFORMATIONHEALTH EFFECTS:Acute:Ingestion:Skin:Eyes:Inhalation:Chronic:If swallowed, this product will cause serious burns to the mouth, throat anddigestive tractContact with skin causes burns. This product may cause skin sensitisation.Contact with the eyes can cause corneal burns which may result in serious eyedamage.Inhalation of vapour may cause respiratory irritation, coughing and shortness ofbreath.This product may cause corrosive damage to body tissues.Toxicity information:None available for this product.SECTION 12.ECOLOGICAL INFORMATIONDo not contaminate waterways and soil. This product is toxic to aquatic organisms and may cause longterm adverse effects in the aquatic environment.DATE OF ISSUE: 21.07.08 REVISION OF: 30.03.07 IDH NO: -Page 3 of 4PRODUCT NAME :NORDBAK HIGH IMPACT WEARING COMPOUND (HARDENER)

MATERIAL SAFETY DATA SHEETSECTION 13.DISPOSAL CONSIDERATIONSDisposal of this material should be undertaken by a registered chemical disposal company. Emptycontainers should be recycled or disposed of by a registered contractor.SECTION 14.TRANSPORT INFORMATIONUN Number: 3259Proper Shipping Name: AMINES, SOLID, CORROSIVE, N.O.S. (CONTAINSAMINOETHYLPIPERAZINE AND NONYLPHENOL)Class:8, CorrosivePacking Group: IIIHazchem code: 2XEmergency Information: Dangerous Goods - Initial Emergency Response Guide (SAA/SNZ HB 76)or EPG 8A1SECTION 15.REGULATORY INFORMATIONSUSDP POISON SCHEDULE: 5SECTION 16.OTHER INFORMATIONAbbreviations/acronyms:ASCC - Australian Safety and Compensation CouncilSUSDP - Standard for the Uniform Scheduling of Drugs and PoisonsDISCLAIMER:The percentage weight (% w/w) of ingredients is not to be taken as a specification guaranteed byHenkel Australia Pty. Limited, but only as an approximate guide to the content of hazardous ingredientsin the material. The information contained herein does not constitute a guarantee by Henkel AustraliaPty. Limited concerning the properties of the material.The information contained in this Material Safety Data Sheet is offered in good faith and has beendeveloped from what is believed to be accurate and reliable sources. The information is offered withoutwarranty, representation, inducement or licence and Henkel Australia Pty. Limited assumes no legalresponsibility for reliance upon same. Henkel Australia Pty. Limited disclaims any liability for loss, injuryor damage incurred in connection with the use of the material or its associated Material Safety DataSheet.This information is not to be construed as a representation that the material is suitable for any particularpurpose or use except those conditions and warranties implied by either Commonwealth or Statestatutes. Customers are encouraged to make their own enquiries as to the material's characteristicsand, where appropriate, to conduct their own tests in the specific context of the material's intended use.DATE OF ISSUE: 21.07.08 REVISION OF: 30.03.07 IDH NO: -Page 4 of 4PRODUCT NAME :NORDBAK HIGH IMPACT WEARING COMPOUND (HARDENER)