On-The-Vehicle - aesco

On-The-VehicleFeatures• Axial (spindle) Runout Compensation Ability whileLathe is in Motion• Semi-automatic Operation• Automatic Safety and Shut Down Systems• Operational Status Light System• Pivotal On-The-Vehicle Brake Lathe Positioning• Quick Connect System• Portable Stand System Low Center of GravityReduces Chance of Falling Over• Three 5-inch Diameter Caster Wheels that Lock for800 Brake Lathe Storage• Counter Balance Cylinder Fitted with StandardSchrader Valve used to Adjust Lathe Height• Telescoping Frame• Locations for Chip Tray, Hub Adapter Set, andToolbox• Chip Tray Features Special Ferris-wheel BasketDesign• Four Piece Hub Adapter Set Covers mostPassenger Vehicles, including Light Trucks• Toolbox Provides a Convenient Location to StoreTools and Accessories on the Portable StandSystem• 4 mm T-handle Socket Hex Wrench• Chatter Bands• Plastic Mirror• Set of Positive Rake Insert Holders (shippedinstalled)• Package of Carbide InsertsSpecificationsMaximum/Minimum Rotor Thickness1.62 inches (41 MM)Maximum/Minimum Rotor Diameter13.78 inches [350 MM]Depth of Cut.025 per SideSpindle Speed88 RPMCarriage Feed Speed.004 inches/rev. (Adjustable)Motor3/4 Horse, Capacitor Start, Totally Enclosed, SinglePhase, 115VAC 60HzDuty Cycle15-minutes, 7 1/2 min. on and 7 1/2 offBased on Normal OperationElectrical Supply115AC 60Hz 15AMP CapacityDimensions42-in. x 42-in. x 48-in.Shipping Weight225 lbs.2 • AMMCO 800 On-The-Vehicle Brake Lathe