Tellabs 7310 Ethernet Demarcation Device

2 TELLABS 7310 ETHERNET DEMARCATION DEVICESpecificationsEthernet• Interfaces: 10GBase-R• 802.3ah Link OAM– Link loopback– Unidirectional link fault detection– Threshold-based monitoringand notification• 802.1ag end-to-end Service OAM and CFM– Supports eight levels of maintenancedomains and Maintenance End Points(MEP)– Up to 512 Maintenance Associations– Connectivity Check Messages (CCM)– Remote Defect Indication (RDI)– Link trace– Diagnostic loopback (Layer 2 ping)• Y.1731 Performance Monitoring– Frame delay– Frame delay variation (jitter)– Frame loss — AIS• IETF compliant Ethernet RemotePerformance Monitoring (RMON)Fault Detection• Supports a variety of link fault detectionand fault propagation features– Loss of Signal (LOS)– Loss of Synchronization (LOSYNC)– Frame Error-based Signal Failure (SF)– Frame error-based Signal Degrade (SD)– Auto-negotiation fault (ANF)– Tellabs RDI (TRDI) based on 802.3ahlink fault indication and RF ordered setTransport NID Functions• Transparent transport of customer data• Ethernet OAM• Comprehensive fault detectionand notification• Remotely managed and provisioned• Supports 9600 byte jumbo frames• MEF 9 and 14 Certified CompliantService NID Functions• Supports all Transport NID functions• Service mapping to enable multipleservices per UNI– 802.1Q VLAN tagging– 802.1ad Provider Bridge VLANstacking (Q-in-Q)– Service Multiplexing up to4K VLANs per port– Layer 2 control protocolpolicy management• Traffic policing and shaping– Granular rate limiting• trTCM (CIR, CBS, PIR, PBS)• srTCM (CIR, CBS, EBS)• CoS based on 802.1p QoS prioritizationIntegrated Management• Remote management– In-band via management VLAN– SNMPv2c/3– CLI via Telnet• Local management– Local management access via serialconsole or 10/100 Mbps Ethernet portsPort Interfaces• XFP transceivers for standard orDWDM wavelengths• XFP transceivers models supportmaximum fiber distances up to 140km• Supports 10 Gigabit (10GBase-R) Ethernetfiber access networksPhysical and EnvironmentalDimensions• Height: 1.75 in. (4.5 cm)• Width: 17.5 in. (44.5 cm)• Depth: 11.0 in. (27.9 cm)• Weight: 7.1 lbs. (3.2 kg) includingredundant Power Supply Units (PSU)• 19-inch data rackOperating Temperature and Humidity• -40° F to +149° F (-40º C to +65º C)• 0%–95% Relative Humidity(non-condensing)• ETSI EN 300 019-1-3Storage Temperature• -40° F to 158° F (-40º C to +70º C)• ETSI EN 300 019-1-1 Power Specifications• -38V to -72V DC input power• 100V to 240V ACRegulatory• FCC Part 15, Class A• Transportation ETSI EN 300 019-1-2• UL 60950 1st Addition• NEBS Level 3• RoHS• China RoHS• DOT-WM_333• WEEE• Ethernet UNI Type 1 — MEF 13• Ethernet Services Definition — MEF 6and MEF10.1• Ethernet Services Delivery — MEF 9and MEF 14North AmericaAsia PacificEurope, Middle East & AfricaLatin America & CaribbeanTellabsOne Tellabs Center1415 West Diehl RoadNaperville, IL 60563U.S.A.+1 630 798 8800Fax: +1 630 798 2000Tellabs3 Anson Road#14–01 Springleaf TowerSingapore 079909Republic of Singapore+65 6215 6411Fax: +65 6215 6422TellabsAbbey Place24–28 Easton StreetHigh Wycombe, BucksHP11 1NTUnited Kingdom+44 871 574 7000Fax: +44 871 574 7151TellabsRua James Joule No. 92EDIFÍCIO PLAZA ISão Paulo – SP04576-080Brasil+55 11 3572 6200Fax: +55 11 3572 6225The following trademarks and service marks are owned by Tellabs Operations, Inc., or its affiliates in the United States and/or in other countries: TELLABS ® , TELLABS and T symbol ® , and T symbol ® . Statements herein may contain projections or otherforward-looking statements regarding future events, products, features, technology and resulting commercial or technological benefits and advantages. These statements are for discussion purposes only, are subject to change and are not to be construed asinstructions, product specifications, guarantees or warranties. Actual results may differ materially.© 2011 Tellabs. All rights reserved. 74.22097E Rev. B 1/11