You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
TM 5-<strong>6115</strong>-631-14&PD -E -Adjust. To rectify to the extent necessary to bring into proper operating range,Aline. To adjust specified variable elements of an item to bring to optimum performance.F– Calibrate. To determine the corrections to be made in the readings of instruments or testequipment used in precise measurement. Consists of the comparison of two instruments, one ofwhich is a certified standard of known accuracy, to detect and adjust any discrepancy in the accuracyof the instrument being compared with the certified standard.G – Install. To set up for use in an operational environment such as an emplacement, site, orvehicle.H - Replace. To replace unserviceable items with serviceable like items.I – Repair. Those maintenance operations necessary to restore an item to serviceable conditionthrough correction of material damage or a specific failure. Repair may be accomplished at eachcategory of maintenance.J - Overhaul. Normally, the highest degree of maintenance performed by the Army in order tominimize time work in process is consistent with quality and economy of operation. It consists of thatmaintenance necessary to restore an item to completely serviceable condition as prescribed bymaintenance standard in technical publications for each item of equipment. Overhaul normally doesnot return an item to like new, zero mileage, or zero hour condition.K - Rebuild. The highest degree of material maintenance. It consists of restoring equipment asnearly as possible to new conditions in accordance with original manufacturing standards. Rebuild isperformed only when required by operational considerations or other paramount factors and then onlyat the depot maintenance category. Rebuild reduces to zero the hours or miles the equipment, orcomponent thereof, has been in use.d. Symbols. The uppercase letter placed in the appropriate column indicates the lowest level atwhich that particular maintenance function is to be performed.e. Tools and Equipment. Column 4. This column is provided for referencing by code, the specialtools and test equipment, (Section Ill) required to perform the maintenance functions (Section II).f. Remarks. Column 5. This column is provided for referencing by code, the remarks (SectionIV) pertinent to the maintenance functions.C-3. Explanation of Columns in Section Ill. Section Ill, Tools, Test, and Support EquipmentRequirements is not applicable.C-4. Explanation of Columns in Section IV. Section IV, Remarks, is not applicable.C-2
Change language