You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
TM 5-<strong>6115</strong>-631-14&P(2) Installation(a) Install switch box ground wire terminal (14) on AC GROUND terminal E2 (13) and securewith lockwasher (12) and nut (11).(b) Install remaining box ground wire terminal (10) on load terminal L0 (8). Install powercable (white) wire terminals (9) on terminal L0 (8) and secure the three wires with lockwasher(7) and nut (6).(c) Position cover (4) on switch box (5) and secure with 16 screws (l), 16 Iockwashers (2)and 16 flat washers (3).Figure 4-14. Ground Wire Replacement.4-26. Taillight Cable Assembly and Electrical Lead Repair and Replacement. One taillight cableassembly and one electrical lead connects each taillight to the trailer wiring harness. The taillightcable assembly and electrical lead are replaced by unplugging four connectors at each end. Repair isaccomplished by replacing defective connectors. To manufacture a replacement cable assembly andelectrical lead, install new connectors on suitable lengths of insulated wire using the proceduresdescribed for repair.a. Male Connector Replacement. (See figure 4-15.)(1) Slide shell (1) back on wire lead (2).4-27
Change language