You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
TM 5-<strong>6115</strong>-631-14&PFigure 4-13. Power Cable Replacement.(g) Connect power cable to load terminals on generator set. (Referto TM 5-<strong>6115</strong>-584-12.)e. Ground Wire Replacement (5-Wire Switch Box). (See figure 4-14.) In the 5-wire switch boxonly, a wire connects load terminal LO to AC GROUND terminal E2 located on the side of the switch boxbelow the terminal board.(1) Removal(a)(b)(c)(d)Remove 16 screws (1, figure 4-14), 16 Iockwashers (2) and 16 flat washers (3) securingcover (4) to switch box (5) and take cover off switch box.Remove nut (6) and Iockwasher (7) from load terminal L0 (8) inside switch box.Slide power cable ground (white) wire terminals (9) and switch box ground wire terminal(10) off load terminal L0 (8).Remove nut (11) and Iockwasher (12) from AC GROUND terminal E2 (13) inside box.Remove ground wire terminal (14).4-26
Change language