You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
TM 5-<strong>6115</strong>-631-14&PFigure 4-5. Accessory Box Replacement.a. Removal.(1) Remove four screws (1, figure 4-5), eight flat washers (2), and four nuts (3) securingaccessory box (4) to trailer bed (5).(2) Lift accessory box (4) off trailer bed (5).b. Installation.(1) Position accessory box (4) on trailer bed (5).(2) Insert four screws (1) with flat washers (2) through accessory box mounting brackets andtrailer bed (5).(3) Working under trailer, install one flat washer (2) and one nut (3) on each screw (l).Tighten hardware to secure accessory box (4).4-20. Fire Extinguisher Bracket Replacement. (See figure 4-6.) Each of the two fire extinguisherssupplied with the power plant is carried in a bracket. One bracket is mounted on each fender.Replacement procedures described below are the same for both brackets.a. Removal.(1) Remove four screws (1, figure 4-6), four flat washers (2) and four nuts (3) securingbracket (4) to fender (5).(2) Remove bracket (4) from fender (5).4-16
Change language