Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
TM 5-<strong>6115</strong>-631-14&PCHAPTER 3OPERATOR/CREW MAINTENANCE INSTRUCTIONSSection I. CONSUMABLE OPERATING AND MAINTENANCE SUPPLIES3-1. Consumable Supplies. Consumable supplies used in the maintenance and operation of thepower plant are listed in Table 3-1.Table 3-1. Consumable Operating and Maintenance Supplies.(1)Componentapplication(2)Nationalstocknumber(3)Description(4)Qtyrequiredfor initialoperation(5)Qtyrequired8 hoursoperation(6)NotesGeneralCleaning6850-<strong>00</strong>-664-5685Solvent, Drycleaning,P-D-6801 quartAs requiredLeg PropAssembly9150-<strong>00</strong>-190-0904Grease, Automotive andArtillery, GAA1 poundAs requiredLeg PropAssembly9150-<strong>00</strong>-186-6681Oil, Lubricating,OE/HDO-301 quartAs required9150-<strong>00</strong>-402-4478Oil, Lubricating, OEA1 quartAs requiredSection Il. LUBRICATION INSTRUCTIONS3-2. General. Detailed instructions for the lubrication of the major components of the power plant arecontained in the applicable Lubrication Orders (LO’s). Refer to DA Pam 25-30 to ensure that the latesteditions of the LO’s are used.3-3. Generator Lubrication. Refer to TM 5-<strong>6115</strong>-584-12 for generator set Lubrication Order.3-4. Trailer Lubrication. There are no operator/crew lubrication requirements for the power planttrailer. However, the operator shall assist unit maintenance.Section Ill. PREVENTIVE MAINTENANCE CHECKS AND SERVICES (PMCS)NOTEThe PMCS chart in this section contains all necessary Operator/Crewpreventive maintenance checks and services for this equipment.3-5. General. The preventive maintenance checks and services listed in Table 3-2 are groupedaccording to stages of equipment operation or time intervals. Using the following as a guide, do thechecks and services at the intervals shown.a. Before you operate, perform your before (B) PMCS. Observe all CAUTIONS and WARNINGS.3-1
Change language