WAREMA Mobile System® WMS Central transmitter

SystemNOTEIf you wish to learn in a WMS Plug receiver that has already been learnedinto another network, switch the mains voltage at the WMS Plug receiver offand on by the following method. For about one minute, the WMS Plug receiveracts as if it were in its delivered state. Within this period, it can be scannedand added to a network. If the WMS Plug receiver is not learned into a networkwithin this minute, it returns to the mode it had before the PowerUp.V230 V0 Vmin. 5 s5 s 5 s5 s 5 stFig. 24PowerUp on the WMS Plug receiver9.2.1.2 Learning out actuators/sensorsProceed as follows to learn out actuators and sensors.Main menu System Commissioning Learn in/out actuators/sensorsbuttonAction/resultIn the main menu, select the [System] menu and press ok.The [System] menu opens.Select the [Commissioning] menu here and press ok.The [Commissioning] menu opens.Using the selection cursor, select the[Learn in/out actuators/sensors] menu item.Call up the function with ok.The central transmitter searches for WMS devices. Then thefollowing menu is displayed.NOTE The overview shows all WMS devices that havealready been learned into the network or that werefound for the first time. If the device has already beenlearned in, the button is activated for learning out adevice.890405_0•en•01.11.2009 We reserve the right to carry out improvements 99