13.07.2015 Views

WAREMA Mobile System® WMS Central transmitter

WAREMA Mobile System® WMS Central transmitter

WAREMA Mobile System® WMS Central transmitter

SHOW MORE
SHOW LESS

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

Safety instructions2.2 Intended useThe <strong>WMS</strong> products enable the connection of different devices such as sunshading products, lighting systems, heating, cooling and ventilating equipmentas well as window drives and sensors.WARNINPlease obtain the approval of the manufacturer if you have questionsregarding the connection of devices not listed in these instructions.CAUTIOThe <strong>WMS</strong> <strong>Central</strong> <strong>transmitter</strong> is for indoor use only. It is not water-proof. Donot leave the <strong>WMS</strong> <strong>Central</strong> <strong>transmitter</strong> outdoors.CAUTIOOnly use the supplied external power supply unit. An unsuitable powersupply unit may lead to malfunctions or even damage the device.The applicable national standards and guidelines must be followed for thecontrol of lighting and ventilating equipment.CAUTIOWhen using window drives, the installer of the system must ensure thatthe safety regulations and precautions of DIN EN 60335-2-103 "Specialrequirements on drives for gates, doors and windows" as well as ZH 1/494"(German) guidelines for power-operated windows, doors and gates" arecomplied with.WARNINThe <strong>WMS</strong> products may only be used to control such window driveswhere the movement of the window cannot cause any injuries.These windows include (partial list), according to DIN EN 60335-2-103:Windows with moving parts located at least 2.5 m above the floor or otheraccess levels.Windows with drives equipped with an external or internal anti-pinching system.Windows with an opening speed that does not exceed 50 mm/s whenmoving between 15 mm and 50 mm away from the closed position, with amaximum opening width of 200 mm and with a closing speed that does notexceed 15 mm/s.WARNINThe approval of the manufacturer must be obtained for uses outsideof the purposes listed here. The consequences of unintended use mayinclude personal injury to the operator or third parties as well as propertydamage to the control panel itself, to connected devices or to moveablemechanical parts of the entire system.Therefore, use our products only as intended.890405_0•en•01.11.2009 We reserve the right to carry out improvements 9

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!