WAREMA Mobile System® WMS Central transmitter
WAREMA Mobile System® WMS Central transmitter
WAREMA Mobile System® WMS Central transmitter
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
SystemMenu itemSlat angle, warm -180...180°Position, cold 0...100 %Slat angle, cold -180...180°Measure value, insidetemperatureSetting range DescriptionSlat angle to which a slat product is movedwhen the "Warm" limit value is reachedPosition to which the product is movedwhen the "Cold" limit value is reachedSlat angle to which a slat product is movedwhen the "Cold" limit value is reachedThe measured value is loaded from theactuator when the [Settings] menu isopened. To refresh the display, close the[Settings] menu and open it again.9.1.3.8 <strong>Central</strong> commandMain menu System Products Product type Channel x Settings <strong>Central</strong> commandMenu item<strong>Central</strong> command ON/OFFMeasured value, centralcommandSetting range DescriptionDefines whether the product responds to acentral command or notThe measured value is loaded from theactuator when the [Settings] menu isopened. To refresh the display, close the[Settings] menu and open it again.9.1.3.9 Safety contactMain menu System Products Product type Channel x Settings Safety contactMenu itemSafety contact ON/OFFMeasured value, safetycontactSetting range DescriptionDefines whether the product responds tothe state of a safety contact or notThe measured value is loaded from theactuator when the [Settings] menu isopened. To refresh the display, close the[Settings] menu and open it again.9.1.3.10 Time switchMain menu System Products Product type Channel x Settings Time switchMenu itemSetting range DescriptionTime switch ON/OFF Activate/deactivate the functionActive/inactive whenabsentSwitch time 1 Monday00:00...23:59- - -Position 0...100 %Slat angle -180...180°Comfort functionsSwitch time 2 MondayEnable,disable, unchanged00:00...23:59- - -The automatic control function depends onthe "absent" variableAdjust the switch time, - - - deactivates theswitch timePosition to which the product is moved atthe switch timeSlat angle to which a slat product is movedat the switch timeHere you can activate or deactivate thecomfort functions at the switch timeAdjust the switch time, - - - deactivates theswitch time890405_0•en•01.11.2009 We reserve the right to carry out improvements 87