WAREMA Mobile System® WMS Central transmitter
WAREMA Mobile System® WMS Central transmitter
WAREMA Mobile System® WMS Central transmitter
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
System<strong>WAREMA</strong><strong>WMS</strong> <strong>Central</strong> <strong>transmitter</strong>9.1.3.6 Ice monitorMain menu System Products Product type Channel x Settings Ice monitorMenu itemSetting range DescriptionIce monitor ON/OFF Activate/deactivate the functionActive/inactive whenabsentStatus, ice alarmLimit valueEnd ice alarmEnd ice alarm automatically0.0...+10.0°CPosition 0...100 %Slat angle -180...180°Measured value outsidetemp.The automatic control function depends onthe "absent" variableThe current status is loaded from the actuatorwhen the [Settings] menu is opened.To refresh the display, close the [Settings]menu and open it again.If the measured value reaches the limitvalue or drops below it, the product movesto the defined position and slat angle.Resets the ice alarm once; the next time itis called up, is displayed againDefines whether an ice alarm is resetautomatically when the temperature rises atleast three degrees above the defined limitvaluePosition to which the product is movedwhen the limit value is reachedSlat angle to which a slat product is movedwhen the limit value is reachedThe measured value is loaded from theactuator when the [Settings] menu isopened. To refresh the display, close the[Settings] menu and open it again.9.1.3.7 Temperature controlMain menu System Products Product type Channel x Settings Temperature controlMenu itemSetting range DescriptionTemperature controlON/OFFActivate/deactivate control functionActive/inactive whenabsentLimit value, warmLimit value, coldDelay, warmDelay, cold-40.0...+80.0°C-40.0...+80.0°C0...99 min0...99 minPosition, warm 0...100 %The automatic control function depends onthe "absent" variableIf this value is reached and exceeded, theproduct moves to the defined position andslat angleIf the measured value reaches the limitvalue or drops below it, the product movesto the defined position and slat angle.Waiting period when the limit value isreached before a move command isexecutedWaiting period when the limit value isreached before a move command isexecutedPosition to which the product is movedwhen the "Warm" limit value is reached86We reserve the right to carry out improvements890405_0•en•01.11.2009
Change language