WAREMA Mobile System® WMS Central transmitter

SystemMenu itemSwitch-off delaySetting range Description0...99 minPosition 0...100 %Slat angle -180...180°Precipitation, manualoverrideMeasured value, precipitationWaiting time after the measured valuedrops below the limit value before the productcan be moved againPosition to which the product is movedwhen the limit value is reachedSlat angle to which a slat product is movedwhen the limit value is reachedDefines whether the product can be movedmanually although the precipitation monitoris still activeThe measured value is loaded from theactuator when the [Settings] menu isopened. To refresh the display, close the[Settings] menu and open it again.9.1.3.5 Wind monitorMain menu System Products Product type Channel x Settings Wind monitorMenu itemSetting range DescriptionWind monitor ON/OFF Activate/deactivate the functionAdjustable in hand-heldtransmitterActive/inactive whenabsentLimit valueDelaySwitch-off delay0...25 m/s0...99 s0...99 minPosition 0...100 %Slat angle -180...180°Measured value, windHere you can define whether hand-heldtransmitters belonging to the network canbe used to influence the control modeThe automatic control function depends onthe "absent" variableIf this value is reached and exceeded, theproduct moves to the defined position andslat angleWaiting period when the limit value isreached before a move command isexecutedWaiting time after the measured valuedrops below the limit value before the productcan be moved againPosition to which the product is movedwhen the limit value is reachedSlat angle to which a slat product is movedwhen the limit value is reachedThe measured value is loaded from theactuator when the [Settings] menu isopened. To refresh the display, close the[Settings] menu and open it again.890405_0•en•01.11.2009 We reserve the right to carry out improvements 85