WAREMA Mobile System® WMS Central transmitter

System9.1.3.1 Basic functionsMain menu System Products Product type Channel x Settings Basic functionsMenu itemSetting range DescriptionAbsentON/OFF Condition for automatic control functionsComfort functions ON/OFFActivating or deactivating the comfort functions9.1.3.2 Sun controlMain menu System Products Product type Channel x Settings Sun controlMenu itemSetting range DescriptionSun control ON/OFF Activate/deactivate control functionAdjustable in hand-heldtransmitterActive/inactive whenabsentLimit value, sunLimit value, cloudDelay, sunDelay, cloud1...100 klx1...100 klx0...99 min0...99 minPosition, sun 0...100 %Slat angle sun -180...180°Position cloud 0...100 %Slat angle cloud -180...180°Measured value, photoHere you can define whether hand-heldtransmitters belonging to the network canbe used to influence the control modeThe automatic control function depends onthe "absent" variableIf this value is reached and exceeded, theproduct moves to the defined position andslat angleIf the measured value reaches the limitvalue or drops below it, the product movesto the defined position and slat angle.Waiting period when the limit value isreached before a move command isexecutedWaiting period when the limit value isreached before a move command isexecutedPosition to which the product is moved ifthe "Sun" limit value is reachedSlat angle to which a slat product is movedwhen the "Sun" limit value is reachedPosition to which the product is movedwhen the "Cloud" limit value is reachedSlat angle to which a slat product is movedwhen the "Cloud" limit value is reachedThe measured value is loaded from theactuator when the [Settings] menu isopened. To refresh the display, close the[Settings] menu and open it again.890405_0•en•01.11.2009 We reserve the right to carry out improvements 83